Extrusion of pastes with a piston extruder for the determination of the local solid and fluid concentration, the local porosity and saturation and displacement profiles by means of NMR imaging

 Nuclear Magnetic Resonance (NMR) was used to investigate the extrusion behaviour of PTFE pastes in a ram extruder. By means of ¹H-NMR imaging (MRI) it is possible to determine the local proton density and therefore, the local fluid concentration. The ¹⁹F-MRI provides the local solid concentration. Thus the local saturation and the local porosity can be calculated with the information of the local fluid and solid concentration. Furthermore displacement profiles can be derived from NMR images by means of correlation techniques without any preparation or marking of the pastes. Received: 8 May 2000   Accepted: 1 May 2001     

Error estimation,adaptivity and data transfer in enriched plasticity continua to analysis of shear band localization

In this paper, an adaptive FE analysis is presented based on error estimation, adaptive mesh refinement and data transfer for enriched plasticity continua in the modelling of strain localization. As the classical continuum models suffer from pathological mesh-dependence in the strain softening models, the governing equations are regularized by adding rotational degrees-of-freedom to the conventional degrees-of-freedom. Adaptive strategy using element elongation is applied to compute the distribution of required element size using the estimated error distribution. Once a new mesh is generated, state variables and history-dependent variables are mapped from the old finite element mesh to the new one. In order to transfer the history-dependent variables from the old to new mesh, the values of internal variables available at Gauss point are first projected at nodes of old mesh, then the values of the old nodes are transferred to the nodes of new mesh and finally, the values at Gauss points of new elements are determined with respect to nodal values of the new mesh. Finally, the efficiency of the proposed model and computational algorithms is demonstrated by several numerical examples.     

Theory and experiment of spatially and temporally partially coherent speckle shearing interferometry

The theory and experiment of spatially and temporally partially coherent speckle shearing interferometry is reported in this rapid communication for the first time. The general requirements for the surface roughness and coherence area of a diffuse object surface in spatially and temporally partially coherent speckle shearing interferometry are discussed. An experimental verification is presented and the results of theory and experiment are in good agreement.     

Differential FBG sensor for temperature-compensated high-pressure (or displacement) measurement

A differential fiber Bragg grating (FBG) sensor with a free active element bulk-modulus for high-pressure (or displacement) measurement is presented. Based on the differential measurement method and an isosceles triangle cantilever structure, problems of cross-sensitivity and chirped signal in FBG sensor are improved both theoretically and experimentally. Preliminary experiments indicate that temperature-compensated measurement results agree well with the theoretical analysis. Displacement measurement sensitivity is 1.75 pm/μm, and the estimated pressure measurement resolution can reach 0.27 MPa in case the wavelength shift measurement resolution is 0.01 nm.     

Characterization of proteins separated by displacement chromatography using low angle laser light scattering photometry

Summary -Lactoglobulin A and B (-LACT) were separated by displacement chromatography (DSC) on an ionexchange column using dextran sulfate as the displacer. A LALLS photometer and a UV detector, in series, were used to determine the molecular weight (MW) of the proteins, on-line. The results indicate that both, -LACT A and B, were present as dimers in the buffer used for the mobile phase. The MWs of the proteins were about 6–8% higher than the theoretical MW of a dimer (37,000). Additional control studies have shown the presence of a high molecular weight species in both the proteins, which could possibly be an aggregate. This species was observed in the LALLS signal but was nearly absent in the UV signal. Our work has demonstrated the feasibility of interfacing LALLS with displacement chromatography for detecting impurities or aggregates which may be difficult to detect by conventional detectors used for chromatography.     

Fractional Order Linear Variable Differential Transformer: Design and analysis

Linear Variable Differential Transformer (LVDT) is the most preferred displacement measurement transducer used in industries because of its simple design and proven reliability. The major challenge faced in LVDT is linearity in limited stroke range. In this paper, a fractional order model of LVDT is developed and its characteristics like sensitivity, nonlinearity and stroke range are analysed by considering fractional behaviour only in self-inductance, mutual inductance and both. The results presented in this paper shows that Fractional Order Linear Variable Differential Transformer (FOLVDT) provides high sensitivity with reduced nonlinearity compared to the conventional LVDT. The results also demonstrate that the FOLVDT can be operated for increased stroke range without compromising on sensitivity and linearity.     

New relationship of displacement signal at quadrant photodiode: Control signal analysis and simulation of a laser tracker

New relationship of displacement signal using opposite sectors on a quadrant photodiode is derived. Standard and new displacement signals are analyzed in details. Through MATLAB^® laser tracking simulation models, based on common and suggested approaches, detailed analysis is performed, and it is shown that better results for the new relationship signal processing are obtained. Within new relationship of displacement signal, the sensitivity of the system to the displacement of the spot increases and, hence, provides better accuracy in positioning up to 30%.     

基于应变片的自由活塞斯特林制冷机位移测试研究

压缩活塞与排出器的位移大小及相位差对自由活塞斯特林制冷机的制冷性能具有极其重要的影响。文中通过对目前各种位移测试方法优缺点分析,结合自由活塞式斯特林制冷机自身特点,提出了采用应变片响应涡旋柔性弹簧形变来测量活塞和排出器位移的新方法。通过分析、设计和标定,建立了一套基于应变片的自由活塞斯特林制冷机位移测量系统。实验测试结果表明,该位移测量系统是可靠的,具有体积小、投资省等优点,且不需要特别的安装空间。