Recent trends in capillary and micro-chip electrophoretic instrumentation for field-analysis

Technical advances in the development of field-deployable capillary and microchip electrophoretic instruments and reports of their deployment between 2013 and 2017 were reviewed. Strategies and considerations in the design of the injection, separation and detection hardware, chemistry and associated infrastructure were discussed from an in-field perspective, with portability, robustness and automation/“ease of use” featuring as key requirements. Integration of functionality is important for adequate in-field performance. Progress was made towards the use of multiple channel devices for increased throughput and/or resolving power, mixing devices for on-line/in-line sample derivatization, battery operation and temperature control. The strengths and weaknesses of the various approaches described in the literature are discussed from the perspective of in-field operation. An overview of the applications of the field electrophoretic instruments is provided, including environmental science and planetary investigation.     

Interpolation of positive operators

We study problems of interpolation of positive linear operators in couples of ordered Banach spaces. From this viewpoint, we study couples of noncommutative spaces L ₁, L _∞ associated with weights and traces on von Neumann algebras.     

高频地波雷达相位补偿系统

OSMAR2000采用的是“一发八收,收发共用”模式的相控阵高频地波雷达.为了扩大其探测的范围,在新的雷达系统中将采用多发多收的模式,从而导致当信号通过通道后,信号的相位会因受到通道的调制而发生改变,使得雷达无法正常工作,因此需要对通道的相位进行实时监控和补偿.在参考了低频段的相位测量原理和射频段的相移电路的设计理论的基础上,该文提出了基于差分放大器、容阻和容感器件的高频地波雷达收发通道的相位控制系统.     

基于线性耦合下混沌系统的同步条件

将混沌同步问题用精确的数学语言给予描述，通过数学分析将其转化为微分方程组的稳定性问题.以Lorenz系统族的Chen氏系统作为典型系统，在线性耦合下分析系统参数，得到了系统达到同步时的充分条件，且在理论上加以证明.结合该条件，提出了一种确定耦合系数的方法.最后用仿真实验验证了该方法的正确性，并验证了在不同耦合方式和参考系统的情况下定理的有效性. 关键词： 混沌同步 耦合 稳定性     

Nanostructure Pt Electrode Obtained via Self-assembly of Nanoparticles on Conductive Oxide-coated Glass Substrate

Self-assembly of platinum nanoparticles were applied to fabrication of counter electrode for dye-sensitized solar cells on conductive oxide-coated glass substrate. The present Pt electrode exhibits high exchange current density of 220 mA/cm^2, which is comparable to those prepared by electrodeposition, magnetron sputtering or thermal decomposition of platinum chloride. After analysis by transmission electron microscopy (TEM), atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS), it was found that the catalyst was structurally characterized as nanosized platinum metal clusters and was continuously arranged on electrode surface. The present nanostructure electrode had high electrocatalytic activity for the reduction of iodine in organic solution.     

Physicochemical compatibility of SrCeO3 with potential SOFC cathodes

The chemical and physical compatibility of SrCeO₃ is investigated with respect to LaMO₃ (M=Mn, Fe, Co) and La_2−xSr_xNiO₄ (x=0, 0.8), via the reaction of fine-grained powder compacts and solid-state diffusion couples. Compositions were chosen so as to give predictive insight into possible candidate materials for all-oxide electrochemical devices. Results show the primary reaction in these systems to be the dissolution of SrO from SrCeO₃ into the LaMO₃/La_2−xSr_xNiO₄, and corresponding formation of La-doped CeO₂. Reaction kinetics are observed to be relatively fast, with element profiles suggesting the diffusion of Sr²⁺ in ceria to be surprisingly rapid. It is demonstrated that perovskite starting materials represent poor candidates for use with SrCeO₃, reacting completely to form Ruddlesden-Popper/K₂NiF₄ type oxides. Reaction with La₂NiO₄ is less pronounced, and formation of secondary phases suppressed for the composition La_1.2Sr_0.8NiO₄. It is thus concluded that Ruddlesden-Popper type oxides represent good candidate materials for use with a SrCeO₃-based electrolytes when doped with appropriate levels of Sr.     

蒙脱土表面键合配位体固相萃取填料的制备及其对重金属离子的吸附性能

通过酸洗、硅烷偶联剂表面活化、键合苯甲酰异硫氰酸酯对蒙脱土进行改性,制得新型固相萃取(SPE)材料。 采用红外光谱、扫描电子显微镜、X射线光电子能谱表征了改性蒙脱土的结构和形貌。 考察了制备的SPE填料对水中As³⁺、Bi³⁺、Cu²⁺、Sb³⁺、Sn²⁺和Pb²⁺的吸附性能,确定了最佳固相萃取条件,对6种金属离子吸附容量分别为10.83、11.92、12.67、10.43、10.01及10.54 mg/g。 通过SPE与电感耦合等离子体质谱联用测定了样品中As³⁺、Bi³⁺、Cu²⁺、Sb³⁺、Sn²⁺和Pb²⁺ 6种重金属离子的含量,检出限分别为0.024、0.013、0.075、0.037、0.011和0.064 μg/L。     

Determination of kinetic parameters of the FeCl3/FeCl2 systemvia a novel treatment of chronoamperometric data

Summary Computer based methods for the processing of chronoamperometric datavia convolutions are discussed. On the example of the quasi-reversible Fe³⁺/Fe²⁺ couple, their application for data acquisition and determination of the heterogeneous electrochemical parameters is demonstrated. The plot of Q/i vs. t/i is superior to that employingi/I ₁, being less sensitive to distortions by charging currents once these have died away and by the effects of damping on the initially rapidly varying currents. Cyclic voltammetry is often combined with convolution or deconvolution, and digital simulation studies are also frequently performed to confirm the results.

---

Bestimmung kinetischer Parameter des Systems FeCl₃/FeCl₂ mittels einer neuen Verarbeitung chronoamperometrischer Daten

Zusammenfassung Computerunterstützte Verfahren zur Verarbeitung chronoamperometrischer Daten mittels Faltungsintegralen werden diskutiert. Am Beispiel des quasireversiblen Systems Fe³⁺/Fe²⁺ wird die Anwendung der neuen Methoden zur Datenerfassung und zur Bestimmung der heterogenen elektrochemischen Parameter gezeigt. Der Plot von Q/i gegen t/i ist dem voni/I ₁ überlegen, da er durch Ladeströme und Dämpfung der ursprünglich stark variierenden Ströme weniger stark beeinflußt wird. Cyclische Voltammetrie wird häufig im Zusammenhang mit Konvolutions- und Dekonvolutionsmethoden angewandt; digitale Simulation zur Überprüfung der Ergebnisse wird ebenfalls oft eingesetzt.

     

Determination of vitamin C and preservatives in beverages by conventional capillary electrophoresis and microchip electrophoresis with capacitively coupled contactless conductivity detection

The separation and detection of commonly used preservatives (benzoate, sorbate) and vitamin C by both conventional CE and microchip electrophoresis with capacitively coupled contactless conductivity detection is presented. The separation was optimized by adjusting the pH-value of the buffer and the use of hydroxypropyl-beta-CD (HP-beta-CD) and CTAB as additives. For conventional CE, optimal separation conditions were achieved in a histidine/tartrate buffer at pH 6.5, containing 0.025% HP-beta-CD and 0.1 mM CTAB. LOD ranged from 0.5 to 3 mg/L (S/N = 3) and the RSDs for migration time and peak area were less than 0.1 and 2%, respectively. A considerable reduction of analysis time can be accomplished by using microchip electrophoresis without significant loss in sensitivity under optimal separation conditions. A histidine/tartrate buffer at pH 6.5, incorporating 0.06% HP-beta-CD and 0.25 mM CTAB, gave detection limits ranging between 3 and 10 mg/L and satisfactory reproducibilities of < or =0.4% for the migration time and < or =3.5% for the peak area. The methods developed are useful for the quantitative determination of food additives in real samples such as soft drinks and vitamin C tablets.     

Effect of Manganese Valence on Specific Capacitance in Supercapacitors of Manganese Oxide Microspheres

Manganese oxides have attracted great interest in electrochemical energy storage due to high theoretical specific capacitance and abundant valence states. The multiple valence states in the redox reactions are beneficial for enhancing the electrochemical properties. Herein, three manganese microspheres were prepared by a one-pot hydrothermal method and subsequent calcination at different temperatures using carbon spheres as templates. The trivalent manganese of Mn₂O₃ exhibited multiple redox transitions of Mn³⁺/Mn²⁺ and Mn⁴⁺/Mn³⁺ during the intercalation/deintercalation of electrolyte ions. The possible redox reactions of Mn₂O₃ were proposed based on the cyclic voltammetry and differential pulse voltammogram results. Mn₂O₃ microsphere integrated the advantages of multiple redox couples and unique structure, demonstrating a high specific capacitance and long cycling stability. The symmetric Mn₂O₃//Mn₂O₃ device yielded a maximum energy density of 29.3 Wh kg⁻¹ at 250 W kg⁻¹.