Inclusion of carbon nanotubes in a TiO2 sol-gel matrix

We report here the successful inclusion of carbon nanotubes (CNs) into a TiO₂ matrix prepared by a sol-gel method. The presence of CNs in the sol-gel matrix and the structure of the film were analyzed principally by transmission electron microscopy. Complementary information about the behavior of embedded carbon nanotubes versus heat treatment and ion irradiation were obtained by X-ray photoelectron spectroscopy. The elaboration of an inorganic matrix containing embedded carbon nanotubes leads to a new nanocomposite. The possible applications of this nanocomposite are discussed.     

Sol-gel preparation and optical properties of SiO2-Ta2O5 glass

Tantalum-doped silica glass was fabricated by the sol-gel process in order to obtain a glass with a high refractive index for optical use. A crack-free, clear glass rod was successfully prepared from a low-density gel and used as the core material for fabricating optical fibers. Transmission loss in the fabricated fibers was high, in the range of 10³-10⁴ dB/km, which may be caused by coloration due to the multivalency of tantalum; however, the loss was reduced by nearly one order of magnitude by heat treatment at 800 °C, that is, to 75 dB/km at a wavelength of 0.8 μm.     

A SAXS study of the nanostructural characteristics of TEOS-derived sonogels upon heat treatment up to 1100 °C

Xerogels obtained from the acid-catalyzed and ultrasound stimulated hydrolysis of TEOS were submitted to heat treatment at temperatures ranging from 60 to 1100 °C and studied by small-angle X-ray scattering (SAXS). The SAXS intensity as a function of the modulus of the scattering vector q was obtained in the range from q₀=0.19 to q_m=4.4 nm⁻¹. At 60 °C the xerogels exhibit an apparent surface fractal structure with a fractal dimension D_S∼2.5 in a length scale ranging from 1/q₁∼1 to 1/q_m∼0.22 nm. This structure becomes extremely rough at 120 °C (D_S∼3) and at 150 °C, it apparently converts to a mass fractal with a fractal dimension D∼2.4. This may mean an emptying of the pores with preservation of a share of the original mass fractal structure of the wet aged gel, for it had presented a mass fractal dimension D∼2.2. A well characterized porous structure formed by 2.0 nm mean size pores with smooth surface of about 380 m²/g is formed at 300 °C and remains stable until approximately 800 °C. At 900 °C the SAXS intensity vanishes indicating the disappearance of the pores in the probed length scale. The elimination of the nanopores occurs by a mechanism in which the number of pores diminishes keeping constant their mean size. The xerogels exhibit a foaming phenomenon above 900 °C and scatter following Porod's law as does a surface formed by a coarse structure.     

Quantitative surface analysis by Auger and x-ray photoelectron spectroscopy

Recent developments in quantitative surface analysis by Auger (AES) and x-ray photoelectron (XPS) spectroscopies are reviewed and problems relating to a more accurate quantitative interpretation of AES/XPS experimental data are discussed. Special attention is paid to consideration of elementary physical processes involved and influence of multiple scattering effects on signal line intensities. In particular, the major features of core-shell ionization by electron impact, Auger transitions and photoionization are considered qualitatively and rigorous approaches used to calculate the respective transition probabilities are analysed. It is shown that, in amorphous and polycrystalline targets, incoherent scattering of primary and signal Auger and photoelectrons can be described by solving analytically a kinetic equation with appropriate boundary conditions. The analytical results for the angular and energy distribution, the mean escape depth, and the escape probability as a function of depth of origin of signal electrons as well as that for the backscattering factor in AES are in good agreement with the corresponding Mote Carlo simulation data. Methods for inelastic background subtraction, surface composition determination and depth-profile reconstructions by angle-resolved AES/XPS are discussed. Examples of novel techniques based on x-ray induced photoemission are considered.     

Conformational Transformation Exhibited by the Peptide Extracted from Crystalline Region of Bombyx mori Silk Fibroin in Solid and Solution States

The conformational transformation of a 30-residue peptide H（Ala-Gly-Ser-Gly-AIa-Gly）5OH, i.e., （AGSGAG）5, extracted from highly crystalline region of Bombyx mori （B. mori） silk fibroin was described by using the high resolution solid state 13^C NMR, and CD spectroscopies. Based on the conformation-dependent 13^C NMR chemical shifts of the Ala, Gly and Ser residues and the line-shape analysis of the conformation sensitive Ala Cβ resonance, the peptide revealed a strong preference for silk Ⅱ structural form, i,e,, an antiparallel fl-sheet structure （φ= - 140±20°and ψ= 135±20°） in solid state. On the contrary, the CD spectra of this peptide in the two non-native hexafluorinated fibre spinning solvents, hexafluoroisopropanol （HFIP） and hexafluoroacetone （HFA）, exhibited the existence of an unusual tightly-folded conformation resembling 310-helix （φ=- 60±20° and ψ=-30±20°）, as judged from the R ratio of [θ]222/[θ]203 in HFIP solution, whereas a dynamically averaged unordered structure in HFA, Taken together, the information inclined to hypothesis that the primary structure of the highly crystalline regions of B. mori silk fibroin may be easily accessible to the large conformational changes, which in turn may be critical for facilitating the structural transformation from unprocessed silk fibroin （silk I form） to processed silk fiber （silk Ⅱform）.     

Rapid determination of protein in plant material by flow injection spectrophotometry with trinitrobenzenesulfonic acid

The rapid determination of protein in plant material based on spectrophotometric determination of amino acids in protein hydrolysates with trinitrobenzenesulfonic acid has been adapted to flow injection analysis. With the manifold described, a routine sampling rate of 120 samples/h is possible, though this, as well as sensitivity, can easily be varied. The method was calibrated against the Kjeldahl method and a good correlation was obtained between the two methods over a wide range of protein values for beans.     

Characterization of the 310-helix in model peptides by HRMAS NMR spectroscopy

A tetra- and a hepta-homopeptide from the C(alpha)-tetrasubstituted Aib (alpha-aminoisobutyric acid) residue were covalently linked to the POEPOP resin by the fragment-condensation approach. The conformational preferences of the two model peptides were determined for the first time on a solid support by means of high-resolution magic angle spinning NMR spectroscopy. The results obtained indicate that the Aib homopeptides adopt a regular 3(10)-helical structure even when they are covalently bound to a polymeric matrix, and thus confirm the remarkable conformational stability of the peptides rich in this amino acid. An ATR-FTIR spectroscopic investigation, performed in parallel, also confirmed that these polymer-bound peptides do indeed adopt a helical conformation. The results of this study open the possibility to exploit the peptide-resin conjugates based on C(alpha)-tetrasubstituted alpha-amino acids as helpful, structurally organized templates in molecular recognition studies or as catalysts in asymmetric synthesis.     

Wavelength-modulated,continuum-source excited atomic fluorescence spectrometric system for wear metals in jet engine lubricating oils using electrothermal atomization

A system for measuring atomic fluorescence of atoms produced via an electrically-heated graphite filament in a flame (acetylene/air or acetylene/nitrous oxide) and excited with a 300-W Eimac xenon are lamp is described. The experimental system also included wavelength modulation for background emission/fluorescence/scatter correction and an optically-triggered electronic integrator for efficient monitoring of the analyte fluorescence signal. Copper, aluminum and molybdenum were determined in jet engine lubricating oil samples (1 μl) with no pretreatment. The determinations are evaluated with respect to the accuracy and repeatability criteria of the U.S. Joint Oil Analysis Program.     

一种大屏幕彩色FED显示系统的研制

论述了印刷型场致发射显示器驱动系统的工作原理,采用AL芯片以及FPGA控制等技术研制出了能驱动显示VGA分辨率的FED显示系统.能显示视频图像,图像亮度达250 cd/m2、对比度达300:1,图像灰度等级达256级,有效显示对角线尺寸为63.5 cm(25in).     

快速热点火熔奥梯铝炸药燃烧转爆轰实验研究

以熔铸型含铝混合炸药熔奥梯铝为对象,研究铸装含铝混合炸药快速热点火后的燃烧转爆轰特性。建立了快速热点火燃烧转爆轰实验平台,由实验装置(加热装置、约束钢管、炸药)、压力测试系统、光纤测速系统组成;加热装置加热15 mm厚45钢钢板,峰值温度大于1 100℃,温升速率为85～95℃/s。开展了快速热点火带壳熔奥梯铝炸药燃烧转爆轰实验,由加热装置加热约束钢管内熔奥梯铝炸药,炸药化学反应阵面压力和传播速度分别由压电性高压压力传感器和光纤探针测定;实测阵面压力约1 GPa,传播速度最大约2 600 m/s。由光纤数据获得炸药化学反应阵面传播轨迹,通过特征线方法获得冲击形成点,半定量给出冲击形成距离大于850 mm;并比较了管体破片质量实测值与炸药完全爆轰时破片平均质量计算值,实测值远小于计算值。综合实测化学反应阵面传播速度和压力、冲击形成距离分析、破片质量比较,可确定熔奥梯铝炸药没有发生完全爆轰,其化学反应状态为爆燃。另外,采用Adams和Pack模型、CJ燃烧模型,都能够半定量的预估冲击形成距离和燃烧波后压力,为实验设计提供依据,但CJ燃烧模型的计算结果更接近于实测值。