镍层耐硝酸腐蚀性测试——一种简单的预先探测ENIG镍层“黑盘”现象的测试方法

随着更加精细的SMT、BGA等表面贴装技术的运用,化学沉镍金(ENIG)作为线路板最终表面处理得到了越来越广泛的应用,同时可怕的“黑盘”现象也随之更广泛地“流行”起来,直接导致贴装后元器件焊接点不规则接触不良。为了贯彻执行最好的流程控制和采取有效的预防措施,了解这种焊接失败的产生机理是非常重要的,及早的观测到可能发生“黑盘”现象的迹象变得同样关键。本文介绍了一种简单的预先探测ENIG镍层“黑盘”现象的测试方法-镍层耐硝酸腐蚀性测试,这种测试可以用于作为一种常规的测试方法监测一般化学沉镍溶液在有效使用寿命范围内新鲜沉积的镍层的质量。利用Weibull概率统计分析在不同的金属置换周期(MTO)下镍层的可靠性能表现。结合试验结果得出了一个镍层耐硝酸腐蚀性的判定标准。     

镍电极及Cd—Ni电池的贮存和自放电研究

通过充放电曲线、循环伏安曲线和ＸＲＤ物相的测量，研究了镍电极及Ｃｄ－Ｎｉ电池的贮存和自放电性能。     

类镍离子（AgXX—XeХХⅦ）能级,跃迁波长和振子强度的理…

本文用ＭＣＤＦ方法计算子类镍离子（ＡｇХХⅦ）的ｎ＝３，４的能级结构，ｎ＝３－４跃迁波长和振子强度，所得结果比最近国外发表结果（ＰｈｙｓＳｃｒｉｐｔａ，４３，１５０（１９９１）更接近实验值，为高剥离态离子谱线的辩识以及短波长激光的研究提供了有益的参考。     

Dissociative Chemisorption of an H2（v,j） Molecule on Rigid Ni （100） Surface： Dependence on Surface Topologies and Initial Rovibrational States of the Molecules

The H2(v,j) Ni(100) collision system has been studied to understand the effects of the surface sites and initial rovibrational states of the molecule on molecule-surface interactions, by a quasiclassical molecular dynamic simulation method. Dissociative adsorption of an H2 molecule on the rigid Ni(100) surface is investigated at topologically different three sites of the surface. Interaction between the molecule and Ni surface was described by a London-Eyring-Polani-Sato (LEPS) potential. Dissociative chemisorption probabilities of the H2(v, j) molecule on various sites of the surface are presented as a function of the translation energies between 0.001-1.0eV. The probabilities obtained at each collision site have unique behaviour. At lower collision energies, indirect processes enhance the reactivity, effects of the rotational excitations and impact sites on the reactivity are more pronounced. The results are compared with the available studies. The physical mechanisms underlying the results and quantum effects are discussed.     

羰基镍分析报警仪

羰基镍分析报警仪运用化学发光原理构成，不仅适用于羰基镍生产车间现场的检测和报警，也适于实验室的研究工作。检出限达0.037mg/m^3(0.5ppb），响应时间2min。     

空气中烧成的镍导体及其应用

将空气中烧成的镍导体用于散热制冷片制作工艺中，可降低成本，提高合格率。通过实验得到的最佳值为：镍导体中４号玻璃（ＳｉＯ２＞３０，Ｂ２Ｏ３＞１０，ＰｂＯ＜５５，ＴｉＯ２少许）的含量４．５％，化学镀镍时间５０ｍｉｎ，方阻４７．５ｍΩ／□，附着力８．１Ｎ／ｍｍ２。     

镍-酸性铬兰K络合物吸附波

用微分脉冲溶出伏安法研究了镍(11)与酸性铬兰K(ACBK)所生成的络合物在悬汞电极上的电化学特性及电化学反应机理，发现电极反应为镍与酸性铬兰K所生成的络合物吸附在电极表面后发生的不可逆还原。在HCl-硼砂介质中(pH8．67)，络合物在-316mV处有一吸附还原峰，其峰电流与镍浓度在0．001～0．010μ/mL范围内呈现良好的线性关系，其最低检出浓度为0．0005μg／mL。     

ICP-AES测定钛基复合材料中镍、钕和铁的研究

采用ICP－AES法对钛基复合材料中的合金元素镍、钕、铁的测定进行了研究，着重进行了基体元素及待测元素镍、钕、铁之间干扰试验及各元素在测定浓度范围内的线性相关性试验，进行了酸度试验，测定了钛基复合材料中3种元素的含量，得到了较好的精密度和准确度。方法简便、可靠，获得满意的分析结果。     

Structural Evolution of Nanostructured γ—Ni—28Fe Alloy Investigated by Using the Internal Friction Technique

The structural evolution of nanostructured γ-Ni-28Fe alloy(n-Ni-Fe)(grain size d-30nm),synthesized by the mechno-chemical method,was investigated by using the internal friction technique combined with differential scanning calorimetry(DSC) in the temperature range from 300K to 670K.An internal friction peak with typical characteristics of the first-order phase transition was observed in the vicinity of 620K,which corresponds to a broad exothermic process revealed by using DSC.Theses results can be explained as the structural changes from the disordering to the ordering transition in the n-Ni-Fe sample.