内芯为三角分布的分段芯型光纤的设计

本文分析了内芯为三角分布的分段芯型光纤的各折射率剖面参数对光纤特性的影响。得到了一条适当的设计途径,使这种光纤的截止波长、色散、模场直径等均达到令人满意的值。     

Experimental Study of Effect of Medium Boundary on Light Distribution in Tissue Phantoms

An experimental method for investigating the effect of medium boundary on distributions of light in the biological tissue phantom intralipid is presented. Measurements of distributions of light in intralipid-10% suspensions at 633 nm are described, in which a narrow collimated beam is incident on the surface of the phantoms and into the different depths inside of the phantoms. The experimental results show that the effect of the boundary of the medium on the curves geometry of light distributions is trivial, but the effect on intensity of scattering light is obvious, the maximal relative change of the energy fluence reaches 53.8% and the position of the peak of the energy fluence curve has a shift of 1.1 mm in the reverse direction of incident light for the phantom with albedo a=0.998, and the effect of the boundary is decreased with the increase of the absorption coefficients of tissue phantoms. The experimental results were analysed by the diffusion theory. These studies will be helpful for further understandings of the relation between the boundary of biological tissue and the distribution of light in tissue.     

关于海面无线传播模型的探讨

现有文献中一般都认为海面环境的无线传播模型近似于自由空间传播模型，但在实际测试中发现，自由空间模型预测值与实测值差别较大，不能很好地解释此类环境的信号传播。笔者根据多次海面覆盖测试的数据，分析并拟合出了新的海面传播模型。     

R~(n+1)中常高阶平均曲率超曲面

本文给出了Rn+1中超曲面的一些积分公式,并利用这些积分公式得到了以球面为边界的常高阶平均曲率超曲面的一些唯一性结果.     

光学非球面二次曲面常数及顶点曲率的研究

受光学非球面制造过程中诸工艺参数的影响,能否保证非球面顶点曲率及二次曲面常数的精度是一个重要问题。基于二次曲面方程,推导出确定光学非球面二次曲面常数k以及顶点曲率半径r的一组算法,并在对一块口径为760mm×200mm标准非球面反射镜的实际测算中进行拟合,经过优化,拟合精度达到Δk=0.015,Δr=0.341mm,从而有效的控制了光学非球面制造过程中的顶点曲率及二次曲面常数的偏差。     

A COMPLETE METRIC OF POSITIVE CURVATURE ON R~n AND EXISTENCE OF CLOSED GEODESICS

ＡＣＯＭＰＬＥＴＥＭＥＴＲＩＣＯＦＰＯＳＩＴＩＶＥＣＵＲＶＡＴＵＲＥＯＮＲ~ｎＡＮＤＥＸＩＳＴＥＮＣＥＯＦＣＬＯＳＥＤＧＥＯＤＥＳＩＣＳ￥ＺＨＵＤＡＸＩＮ（ＤｅｐａｒｔｍｅｎｔｏｆＭａｔｈｅｍａｔｉｃｓ，ＴｉａｎｊｉｎＵｎｉｖｅｒｓｉｔｙｌＴｉａｎｊ?..     

重复试验随机效应模型误差方差的齐性检验$(k=2)$

本文对重复试验次数为2的随机效应方差分析模型, 给出了误差方差齐性, 即$H_0:\sigma_1^2 =\sigma_2^2\leftrightarrow H_1:\sigma_1^2\ne\sigma_2^2$的一种具有相合性的检验方法\bd 并对三个常见模型给出了检验统计量和拒绝域的具体表达式, 最后是两个应用实例\bd