High index of refraction via quantum interference in a three-level system of Er^3＋-doped yttrium aluminium garnet crystal

A simple three-level system is proposed to produce high index of refraction with zero absorption in an Er^3＋-doped yttrium aluminium garnet （YAG） crystal, which is achieved for a probe field between the excited state 4I13/2 and ground state 4I15/2 by adjusting a strong coherent driving field between the upper excited state 4I11/2 and 4I15/2. It is found that the changes of the frequency of the coherent driving field and the concentration of Er^3＋ ions in the YAG crystal can maximize the index of refraction accompanied by vanishing absorption. This result could be useful for the dispersion compensation in fibre communication, laser particle acceleration, high precision magnetometry and so on.     

HgCl2/I2复合催化剂协同催化合成异丙醇钇的研究

以金属钇和异丙醇为原料，以HgCl2/I2为复合催化剂，通过对金属钇的机械加工以增加其比表面，并将异丙醇脱水使其含水量降低至0．05％，体系在82℃回流5h，经过滤、减压蒸馏，得到了白色海绵状异丙醇钇，其产率高达83％，合成时间比文献报道的缩短了19h，产率提高了8％。文章确定了催化剂的最佳用量为20gY加入60mg HgCl2/I2，研究了合成产率与HgCl2/I2催化剂和HgCl2催化剂的依赖关系及异丙醇中含水量对合成产率的影响，并对HgCl2/I2的催化作用机理进行了初步探讨。     

4-Benzoylbenzoate intercalated in layered double hydroxides: a new catalyst for photo-oxidation of sulfides in solution and in the gas phase

A new mixed organic-inorganic photosensitizer, based on 4-benzoylbenzoate intercalated into a layered double hydroxide has been prepared, characterized and successfully tested for the photo-oxidation of dialkylsulfides, both in acetonitrile and in the gas phase.     

离子束合成钇硅化物的结构及红外谱特征

将稀土金属钇离子注入到n型单晶Si(111)中制备出钇硅化物埋层.利用x射线衍射、卢瑟福背散射和傅里叶红外吸收谱测量分析了样品的结构、原子的埋层分布和振动模式.结果表明，Y离子在注入过程中已与基底中的Si原子形成了YSi2结构相.真空下的红外光辐照处理促使YSi2择优取向生长，埋层中Si与Y的平均原子浓度比由24下降为20，与六方YSi2的化学计量比一致.还给出了钇硅化物的特征红外吸收谱.     

Precipitation and characterization of uniform submicrometer lead titanate particles. Part II: Reaction mechanism

The chemical mechanism of the precipitation of lead titanium peroxohydroxide particles in a solution of nitrilotriacetate (NTA) complexes of lead and titanium peroxo-hydroxide is envisioned as the interaction between cations of lead hydroxide and anions of polymeric titanium peroxo-hydroxide.     

A computational study into the reactivity of epichlorohydrin and epibromohydrin under basic conditions in the gas phase and solution

Ab initio molecular orbital calculations were carried out on epibromohydrin (EBH) and epichlorohydrin (ECH) in an attempt to elucidate their reactivity with respect to a hard nucleophile, hydroxide. These systems were modeled in both the gas phase and a polar solvent under basic conditions. In the gas phase, it was determined that a direct displacement mechanism (nucleophilic attack at the C1 position) was operative for EBH, while an indirect pathway (nucleophilic attack at the C3 position and subsequent intramolecular displacement) was followed for ECH. In an acetone solution, only the indirect displacement mechanism was found to occur. An electrostatic argument is advanced to account for this behavior in polar solution. Copyright © 2007 John Wiley & Sons, Ltd.     

纯锆上离子注入钇和镧后的表面分析

用金属蒸汽真空弧源，以40kV加速电压对纯锆样品分别进行了10¹⁶—10¹⁷/cm²的钇、镧离子注入，注入温度约为130℃.然后对注入样品进行表面分析.x射线光电子能谱分析表明，注入的钇以Y₂O₃形式存在，镧以La₂O₃形式存在.俄歇电子能谱表明，纯锆基体表面的氧化膜厚度随着离子注入剂量的增加而增加，当离子注入剂量达到10¹⁷/cm²时，氧化膜的厚度达到了最大值.卢瑟福背散射显示镧层的厚度约为30nm，同时直接观察到当离子注入剂量为(La+Y)10¹⁷/cm²时，纯锆样品表面发生了严重的溅射. 关键词： 纯锆 钇和镧离子共注入 卢瑟福背散射 x射线光电子能谱     

氢氧化铝镁正电溶胶制备及性能研究

氢氧化铝镁正电溶胶制备及性能研究侯万国，张春光，孙德军，梁晓丽，王果庭（山东大学胶体与界面化学研究所，济南，２５０１００）关键词混合金属氢氧化物，溶胶，超细颗粒混合金属氢氧化物的合成、组成及结构等已得到广泛研究［１，２］．我们也曾用插入法合成了混合金...     

Influence of the conditions of manufacture of nanomeric zirconium dioxide,stabilized with yttrium oxide,on its catalytic properties in the oxidation of CO

The morphological and catalytic properties of samples of nanomeric zirconium dioxide, stabilized with yttrium oxide, manufactured via the effect of a UHF field during the process of drying precipitated zirconium hydroxide and calcination at temperatures from 300 to 1000 °C, were studied. It was shown that the highest activity in the oxidation of CO occurred with 40 nm particles of zirconium dioxide prepared at 1000 °C. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 43, No. 2, pp. 96–101, March–April, 2007.