大口径宽视场双波段扫描红外相机光学设计

通过分析计算,设计了一种大口径宽视场折射式红外相机光学系统。该系统设计用于超长线阵扫描红外相机的地面演示成像,它能同时对短波2μm—3μm、中波3μm—4.5μm双波段成像,且同时具有24°的大视场和150mm的宽口径,成像质量接近衍射极限。该系统在航天遥感领域应用广泛。     

Wide‐angle X‐ray diffraction and differential scanning calorimetry study of the crystallization of poly(ethylene naphthalate), poly(butylene naphthalate), and their copolymers

The crystallization behavior of a series of poly(ethylene‐co‐butylene naphthalate) (PEBN) random copolymers was studied. Wide‐angle X‐ray diffraction (WAXD) patterns showed that the crystallization of these copolymers could occur over the entire range of compositions. This resulted in the formation of poly(ethylene naphthalate) or poly(butylene naphthalate) crystals, depending on the composition of the copolymers. Sharp diffraction peaks were observed, except for 50/50 PEBN. Eutectic behavior was also observed. This showed isodimorphic cocrystallization of the PEBN copolymers. The variation of the enthalpy of fusion of the copolymers with the composition was estimated. The isothermal and nonisothermal crystallization kinetics were studied. The crystallization rates were found to decrease as the comonomer unit content increased. The tensile properties were also measured and were found to decrease as the butylene naphthalate content of the copolymers increased. For initially amorphous specimens, orientation was proved by WAXD patterns after drawing, but no crystalline reflections were observed. However, the fast crystallization of drawn specimens occurred when they were heated above the glass‐transition temperature. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 843–860, 2004     

CCD摄像机大视场光学镜头的设计

为提高CCD摄像机的成像质量，同时使镜头结构紧凑、小型化，在大视场光学镜头的设计中，引入标准二次曲面和偶次非球面。根据初级像差理论，分析了非球面的位置、初始结构参数的求解规律。通过理论计算和ZEMAX光学设计软件的优化，给出工作波长为0.4～0.7μm、全视场角为80°，相对孔径为1∶1.5的镜头设计实例。该镜头由7块镜片组成，包括一个标准二次曲面和两个8次方非球面；在40lp/mm空间频率处的MTF值超过0.85，全视场畸变小于3％，像质优良     

Untersuchungen an Hydriden im Bereich der Phase Ti2CO1—x Fe x (x=0–0,5)

The hydrogen absorption of the phase Ti₆₄Co_32–x Fe _x (x=0...16) and its influence on the magnetic properties have been investigated. Measurements of the vapour-pressure, wide-line NMR and magnetic susceptibility have been performed. Substitution of Co by Fe does not change the amount of absorbed hydrogen. However the reaction rate of hydriding process, the activation energy of diffusion and the magnetic quantities change upon this substitution.

     

Isomorphous inclusions of silicon, aluminum, and titanium in the germanate zeolite IPC-3

The zeolite IPC-3, isomorphous with germanate zeolite ASU-16, and its silicon, aluminum, and titanium analogs, were obtained in the presence of 1,6-diaminohexane as a template. It is possible to incorporate selectively the elements in different crystallographic positions, determined by the nature of the element, particularly its valency and its coordination number with respect to oxygen. Silicon takes tetrahedral positions in the IPC-3 lattice, Al either tetrahedral or octahedral positions, and Ti octahedral positions. Small amounts of the lithium cations facilitate tetrahedral coordination and increase the Al content in IPC-3. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 42, No. 4, pp. 246–251, July–August, 2006.     

Efficient organic photovoltaic cells based on thiazolothiazole and benzodithiophene copolymers with π‐conjugated bridges

New donor–π–acceptor (D–π–A) type conjugated copolymers, poly[(4,8‐bis((2‐hexyldecyl)oxy)benzo[1,2‐b:4,5‐b′]dithiophene)‐alt‐(2,5‐bis(4‐octylthiophen‐2‐yl)thiazolo[5,4‐d]thiazole)] (PBDT‐tTz), and poly[(4,8‐bis((2‐hexyldecyl)oxy)benzo[1,2‐b:4,5‐b′]dithiophene)‐alt‐(2,5‐bis(6‐octylthieno[3,2‐b]thiophen‐2‐yl)thiazolo[5,4‐d]thiazole)] (PBDT‐ttTz) were synthesized and characterized with the aim of investigating their potential applicability to organic photovoltaic active materials. While copolymer PBDT‐tTz showed a zigzagged non‐linear structure by thiophene π‐bridges, PBDT‐ttTz had a linear molecular structure with thieno[3,2‐b]thiophene π‐bridges. The optical, electrochemical, morphological, and photovoltaic properties of PBDT‐tTz and PBDT‐ttTz were systematically investigated. Furthermore, bulk heterojunction photovoltaic devices were fabricated by using the synthesized polymers as p‐type donors and [6,6]‐phenyl‐C₇₁‐butyric acid methyl ester as an n‐type acceptor. PBDT‐ttTz showed a high power conversion efficiency (PCE) of 5.21% as a result of the extended conjugation arising from the thienothiophene π‐bridges and enhanced molecular ordering in the film state, while PBDT‐tTz showed a relatively lower PCE of 2.92% under AM 1.5 G illumination (100 mW/cm²). © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1978–1988     

Solid‐state drawing of β‐nucleated polypropylene: Effect of additives on drawability and mechanical properties

Isotactic polypropylene (i‐PP) can crystallize in different crystal modifications. In this article, the effect of sepiolite (one‐dimensional) and carbon black (three‐dimensional) fillers on the solid‐state drawability of i‐PP is discussed. The cross‐hatched structure of thermodynamically most stable α‐crystal phase in i‐PP does not allow for perfect chain alignment during solid‐state drawing. The β‐phase i‐PP, obtained by addition of specific nucleating agents, crystallizes in a non‐cross‐hatched spherulitic structure and allows more easy drawing. Depending on the filler type, β–α transformation takes place at different draw ratios, as was observed by in situ wide‐angle X‐ray diffraction measurements. It was observed that β‐nucleated i‐PP has a lower yield stress and can be drawn further than i‐PP crystallized in the α‐crystal phase. If added in the right amount, both carbon black and sepiolite have a reinforcing effect on PP tapes. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 1071–1082     

LED微阵列投影系统设计

为满足便携式投影仪的市场需求,设计了一种基于LED微型阵列的投影系统。该系统由显示单元和投影物镜构成。采用尺寸为12 mm×9 mm的自发光LED微型阵列作为系统的显示单元,利用光学设计软件设计了投影物镜。投影物镜采用反远距光学结构,全视场角为80°,焦距为8 mm,属于强光、广角镜头。在空间频率20 lp/mm处,该物镜的调制传递函数大于0. 85,畸变小于2%,符合投影系统的设计要求。该投影系统具有体积小,结构简单,投影效果好,易加工等诸多优势,可为第三代投影技术的发展提供参考。     

二苯磷酰基取代四苯基硅的合成及在构筑宽禁带聚合物中的应用

设计并合成了二苯磷酰基取代的四苯基硅基团,并将其作为宽禁带聚合物母体材料构筑基元,通过Suzuki反应偶连3,6位取代的咔唑合成了聚合物SiCzP.对聚合物的结构进行了系统的表征.与模型聚合物SiCz相比,二苯磷酰基的强吸电子能力,降低聚合物母体材料的LUMO能级,更有利于电子的注入.SiCzP与SiCz的玻璃化转变温度分别为219与227℃,失重5%时的分解温度分别为441与426℃.二者均具有良好的成膜性,掺杂器件初步结果表明,二苯磷酰基的引入使器件的亮度和效率都得到提高,其最大流明效率和功率效率比SiCz分别提高了98%和75%.