Reciprocating sliding wear behavior of laser-clad small amplitude Mo2Ni3Si/NiSi metal silicide composite coatings

Mo₂Ni₃Si/NiSi metal silicide composite coatings with a fine microstructure consisting of Mo₂Ni₃Si primary dendrites and the interdendritic Mo₂Ni₃Si/NiSi eutectics were fabricated on austenitic stainless steel AISI 321 by laser cladding process. Small amplitude reciprocating sliding wear resistance of the coatings is evaluated as functions of normal load and slip amplitude and the wear mechanisms were discussed based on worn surface morphology observations. Results showed that the Mo₂Ni₃Si/NiSi coatings have excellent small amplitude reciprocating sliding wear resistance.     

Front roughening in three-dimensional imbibition

We investigate the structure and dynamics of the interface between two immiscible liquids in a three-dimensional disordered porous medium. We apply a phase-field model that includes explicitly disorder and discuss both spontaneous and forced imbibition. The structure of the interface is dominated by a length scale ξ_× which arises from liquid conservation. We further show that disorder in the capillary and permeability act on different length scales and give rise to different scalings and structures of the interface properties. We conclude with a range of applications.     

龋病人牙釉质表面硬度及抗磨损性能测试

采用人工方法制成人牙釉质浅龋及使用抗龋措施的龋损釉质样本，分别测量各组釉质表面显微硬度，并以微动摩擦磨损试验机测试其抗磨性能，试验结果表明：各组实验组釉质较对照组表面硬度都有不同程度下降，氟化钠前处理会使釉质表达硬度显著下降，人工浅龋牙釉质的抗磨损性能不如正常釉质，使用两种抗龋措施对其抗磨性能没有明显改善。     

稀土变质热锻模具铸钢高温磨损性能的研究

研究了稀土（RE）变质热锻模具铸钢的高温磨损性能，并与热锻模具钢H13钢和3Cr2W8V钢进行对比，探讨了稀土元素的作用和热锻模具铸钢的高温磨损机理。结果表明：随着RE加入量的增加，热锻模具铸钢的磨损率先减后增，RE加入量在质量分数为0．05％时热锻模具铸钢具有最佳的高温磨损性能。RE变质热锻模其铸钢的高温耐磨性明最高于H13钢和3Cr2W8V钢。高温磨损机理为氧化磨损和氧化物的疲劳剥落，磨屑为块状的Fe2O3和Fe3O4。     

Effect of Sintering Temperature on the Corrosion and Wear Behavior of Protective SiO2-Based Sol-Gel Coatings

Sol-gel hybrid organic-inorganic and inorganic SiO₂-based protective coatings with and without added 3 m glass particles were developed and tested for their corrosion and wear behavior of an stainless steel substrate (AISI316L). The corrosion resistance greatly increases by incorporating glass particles in the sols. The incorporation of particles in the coatings allows the synthesis of thicker crack-free coatings. On the other hand, the corrosion resistance increases for coatings with a higher organic content obtained at lower sintering temperature. These coatings are also highly stable in saline aqueous solutions. However, the wear resistance is badly affected by the hybrid character of the SiO₂ matrix. The optimum coating process in terms of corrosion and wear resistance, appears to be a hybrid system with a dense SiO₂ network achieved at intermediate sintering temperatures.     

硬脂酸钾固体润滑薄膜的制备及其摩擦磨损性能研究

采用浸渍-提拉法制备出硬脂酸钾薄膜,用DF-PM型静-动摩擦磨损试验机和UMT-2MT型摩擦磨损试验机考察了在低速滑动和高速滑动条件下硬脂酸钾薄膜的摩擦磨损性能,采用扫描电子显微镜和X射线能量色散谱仪观察分析了薄膜及偶件磨损表面的形貌及其典型元素的面分布情况.结果表明,以GCr15钢球为偶件在高速滑动和以氮化硅球作为偶件在高、低速滑动条件下,薄膜具有较好的摩擦磨损性能.由于钢球和氮化硅陶瓷球表面粗糙度及其化学状态存在差异,硬脂酸钾更容易在氮化硅球表面形成转移膜,从而具有更低的摩擦系数和更长的耐磨寿命.     

CrN镀层的微粒磨损性能及其切削行为研究

在Teer UDP 550型闭合场非平衡磁控溅射离子镀设备上制备CrN镀层,以球-盘方法测定的比磨损率和微粒磨损法测定的微粒磨损率评价CrN镀层的耐磨性能,采用高速钢镀层钻头的钻孔数评价镀层的切削性能.结果表明,CrN镀层的微粒磨损率对氮流量(用光谱发射因子OEM值控制)的变化很敏感,而比磨损率却不能反映这种由于氮流量变化带来的镀层结构和性能的变化.在不同偏压条件下所制备的镀层微粒磨损率变化不明显.当微粒磨损率低于某一值时,CrN镀层的钻孔寿命明显提高,而比磨损率则无此规律.     

缅甸蟒蛇腹鳞表面的摩擦机理及摩擦各向异性研究

采用原子力显微镜观察缅甸蟒蛇腹鳞表面的微观结构,采用UMT-2型摩擦磨损试验机研究不同载荷及运动方向的腹鳞表面的宏观摩擦各向异性,建立了摩擦运动的接触模型,分析了腹鳞表面的磨损机理.结果表明:腹鳞表面的微观结构由指状微突体和板结构部分周期排列而成,其结构可用9个特征参数定量描述;腹鳞表面摩擦力由分子作用力、表面微突体的犁沟力、楔形作用力以及材料弹性滞后共同引起;腹鳞表面的摩擦系数在0.07左右并与运动方向有关,摩擦系数随载荷增加而减小;后向运动及左、右侧向运动时摩擦系数基本相等,比前向运动时高33%左右;腹鳞表面微突体不同方向上倾斜角度的差异是引起摩擦各向异性的主要原因.研究结果对仿生制造摩擦各向异性表面提供实验依据.     

Al/AlN多层膜的摩擦磨损性能研究

采用柱状靶磁控溅射系统制备Al/AlN纳米多层膜,采用纳米压痕仪测量Al/AlN纳米多层膜的纳米硬度,在UMT-2M型摩擦磨损试验机上评价其摩擦磨损性能.结果表明:当AlN层较厚时,薄膜在很短时间内被磨穿;调节Al/AlN层厚比为2.9/1.1时,薄膜的摩擦磨损性能明显提高;当保持Al/AlN层厚比为2.9/1.1、变化多层膜的调制周期时,薄膜的摩擦系数较低,但硬度较低的薄膜由于承载能力不够,不能够保持优良的摩擦磨损性能.     

Nano-WC/PTFE-Ni复合电刷镀层的磨损性能研究

采用电刷镀技术在Q235钢基材上制备含纳米WC和PTFE的镍基复合镀层,采用S-2700型扫描电子显微镜观察镀层表面形貌及其显微组织,采用HX-1型显微硬度计测定镀层的显微硬度,采用WS-2005型涂层附着力自动划痕仪测定镀层与基体的结合强度,采用HT-500型销-盘高温摩擦磨损试验机测量镀层的滑动磨损性能.结果表明:镀液中同时加入纳米WC和PTFE可以得到表面形貌平整、纳米粒子分布均匀的纳米复合镍镀层;复合镀层的硬度随WC含量的增加而增大,随PTFE含量的增加而减小;含有2种纳米粒子的复合镍镀层的耐磨性比镍镀层和含单一WC或PTFE的镍镀层的耐磨性优良;当镀液中WC和PTFE含量分别为3.0 g/L和7.5 mL/L时,复合镍镀层的显微硬度较镍镀层提高约30%,耐磨性较镍镀层提高7倍.