HIRFL–CSR加速器中束流与真空中剩余气体的碰撞损失

研究了重离子加速器中束流与真空中剩余气体的碰撞损失过程和碰撞截面,在依据大量实验数据的基础上,提出了一组计算离子一原子的电荷交换截面的经验公式.以兰州重离子加速器HDRFL及冷却储存环CSR为例,给出了依据碰撞截面的公式计算束流在加速器真空中的传输效率的方法,并计算了在不同真空度下HIRFL的ECR源轴向注入束运线、注入器SFC、前束运线、主加速器SSC和后束运线等不同加速阶段及CSR的传输效率,并提出合理的真空度要求.HIRFL的真空分布测量和束流的损失测量证明了该计算方法的可靠性.     

环状连续强激光下光学薄膜的瞬温和热畸变

详细研究了非冷却光学薄膜元件在环形激光光束辐照下的瞬态温度分布和随后的热畸变，并且用泰曼干涉仪实际测量了连续波氧碘激光辐照各种非冷却光学元件的热畸变量并与理论计算相比较，分析结果表明理论和实验相一致。     

Indirect Methods For Determination of The Protective Effects of Coating Films on The Surface of Crystals

The extents of the protective effects of coating films on the surface of crystals were determined. Three different samples were made with different quantities of coating fluid (Sepifilm LP 010 in 10% aqueous solution). Since the atomizing rate was constant, the coating time increased in parallel with the volume of coating fluid applied. The direct measurement of film thickness and smoothness is very difficult, and therefore indirect methods were used. Dimenhydrinate was chosen as model drug; this is a heat-sensitive antihistamine with a low melting point. This temperature can be reached during the tableting process. The behaviour of samples on exposure to heat was examined by differential scanning calorimetry. The water uptakes of the samples were determined with an Enslin apparatus. Plasticity was studied with an instrumented tablet machine. These indirect methods (thermal conductivity, water uptake and plasticity measurements) revealed connections between the results of the various experiments. An overlong coating time decreased the protective effect of the coating film. This revised version was published online in August 2006 with corrections to the Cover Date.     

Chromatographic characterization of high‐boiling petroleum fractions

Detailed investigation of solvent‐separated fractions of petroleum vacuum residues is necessary for understanding the separation mechanism using different solvents and to prepare better feedstocks for secondary conversion processes. The efficiency of different solvents to remove polars and insolubles from vacuum residues (of two Indian crude oils) has been studied. The solvents used were n‐heptane, n‐hexane, and n‐pentane (non‐polar) and ethyl acetate (polar). Soluble fractions were characterized for hydrocarbon group type analysis using high performance liquid chromatography (HPLC), average molecular weights using size exclusion chromatography (SEC), and boiling point distribution using high temperature gas chromatography (HTGC). Method development for HPLC analysis involved the study of parameters such as columns, solvent polarity, detectors, model compounds study, calibration, flow, and solvent gradient programming. The study demonstrated that ultimate soluble fractions have the least content of polar structures of the kind which can cause problems, during cracking and are least prone to cracking. The HPLC, SEC, and simulated distillation (SIMDIS) methods developed and standardized are simple, accurate, and suitable for the rapid assay needed for quick compositional surveys.     

非晶金刚石膜的性能及其应用

非品金刚石薄膜具有超高硬度等一系列优异的特殊性能，为工程界孜孜追求的材料表面镀膜。用百纳科技公司研发制造的过滤阴极真空电弧离子镀膜机镀制的非晶金刚石薄膜，SP^3金刚石结构量≥80％，硬度高，膜／基结合力高，摩擦系数小，耐磨损，耐腐蚀，透光率高，在电子，机械，光学，生物医学上有广泛应用前景。我们已在视窗玻璃，丝锥，模具，硬质合金刀头等产品上成功应用。     

强流四脉冲电子束源实验研究

 为了进行强流多电子束源研究，对现有2MeV LIA 注入器进行了四脉冲改造，二极管脉冲电压约500kV。实验研究了天鹅绒阴极在四脉冲条件下的发射能力、传导电流负载效应以及阴极等离子体运动对阴极电子发射和束能量的影响。利用空间电荷限制流模型推算出阴极等离子体膨胀速率在1 ~4cm/μs之间。     

有限核真空中的反核子能谱

通过建立能够自洽地描述核子和反核子束缚态的相对论Hartree模型来研究有限核中的量子真空,其中狄拉克海对介子场方程的贡献由单圈图考虑,模型中还引入了ω介子和ρ介子的张量耦合项.在拟合球形核的性质后得到模型的参数,给出核子有效质量为m*/MN≈0.78;计算得到的核子壳模型能级与实验值相一致,在考虑张量耦合项的效应后真空反核子位阱深度增大了20—30MeV.     

Optimal design of a convergent-barrel cold spray nozzle by numerical method

A convergent-barrel (CB) cold spray nozzle was designed through numerical simulation. It was found that the main factors influencing significantly particle velocity and temperature include the length and diameter of the barrel section, the nature of the accelerating gas and its pressure and temperature, and the particle size. Particles can achieve a relatively low velocity but a high temperature under the same gas pressure using a CB nozzle compared to a convergent-divergent (CD) nozzle. The experiment results with Cu powder using the designed CB nozzle confirmed that particle deposition can be realized under a lower gas pressure with a CB nozzle.