BP neural network recognition algorithm for scour monitoring of subsea pipelines based on active thermometry

Scour monitoring is an important concern for subsea pipeline systems. The active-thermometry-based scour monitoring is based on the difference of heat transfer properties between sediment and sand, recognizes the surrounding media though temperature changing patterns during heating and cooling processes, and hence detects the free spans. Based on the scour monitoring system, a two-layer BP neural network was employed to process the monitoring data and achieved media recognition. The network's inputs were normalized temperature time histories. The network's outputs denoted different media: sediment and water. To validate the method, three experiments were conducted; one was used for training the network and the other two for testing. Also, the effect of noise on the network's performance was studied through simulation. The results demonstrated the feasibility and robustness of the neural network.     

基于回波平移序列的快速三维磁共振温度成像方法

高强度聚焦超声（HIFU）是一种无创的热消融疗法，为保证其安全性和有效性，需要一种精度高、速度快的测温方法在其治疗过程中对温度进行监控.基于质子共振频率位移（PRFS）的磁共振温度成像（MRT）对温度具有较高的灵敏度，且与温度具有良好的线性关系，因此常被用于引导HIFU治疗.然而在实际应用中，HIFU治疗的最大隐患在于可能造成表皮灼伤，并且灼伤区域可能与焦点区域相隔较远.因此MRT的监控范围十分重要.本文基于三维回波平移成像序列，结合可控混叠的空间并行成像技术，实现了时间分辨率为3 s的快速三维温度成像.为了验证该方法的精度，本文首先设计了仿体降温实验，利用光纤温度计验证回波平移序列测温的准确度和精确度.然后在室温条件下扫描离体猪肉组织，对比加速前后的MRT的测温精确度.在HIFU加热条件下扫描离体猪肉组织，对比加速前后的MRT的测温准确度.结果显示，本文提出的方法可以在3 s内完成三维温度精准测量，对于HIFU治疗的安全监控具有重要意义.     

Determination of Thermal History by Photoluminescence of Core‐Shelled Quantum Dots Going Through Heating Events

A kind of novel thermal history nanosensors are theoretically designed and experimentally demonstrated to permanently record thermal events. The photoluminescence (PL) spectrum of core‐shelled quantum dots (QDs) CdSe/ZnS irreversibly shifts with heating histories (temperature and duration) of thermal events. The induced PL shift of the QDs CdSe/ZnS is employed to permanently record thermal histories. We further model a kind of thermal history nanosensor based on the thermal‐induced phenomena of core‐shelled QDs to permanently record thermal histories at microscale and demonstrate to reconstruct temperature and duration of heating events simultaneously from PL spectra of the QDs. The physical mechanism of the sensors is discussed.     

Conformational Dynamics of Monomer‐ versus Dimer‐like Features in a Naphthalenediimide‐Based Conjugated Cyclophane

The design and synthesis of an enantiomeric pair of 1,8‐diethynylanthracene‐bridged naphthalenediimide (NDI)‐based cyclophanes ( Cyclo‐NDI s) are reported. Each enantiomer of Cyclo‐NDI exhibits a circularly polarized luminescence signal with a relatively large luminescence dissymmetry factor (g_lum=±8×10^?3). We have further investigated the modulation of through‐space electronic communication between co‐facially oriented NDIs in a discrete Cyclo‐NDI with changes in the temperature. Tuning of the electronic communication results from the conformational transformation of monomer‐ versus dimer‐like features of Cyclo‐NDI , as confirmed by UV/Vis, fluorescence, circular dichroic, and NMR spectroscopic analysis. The temperature‐dependent optical response in the Cyclo‐NDI through the conformational transformation could be utilized as a highly sensitive and reversible optical thermometer in a wide temperature range (100 to ?80 °C).     

基于拉曼热测量技术的铜基复合物法兰GaN基晶体管的热阻分析

采用拉曼热测量技术结合有限元热仿真模型,分析比较新型铜/石墨复合物法兰封装与传统铜钼法兰封装的GaN器件的结温与热阻,发现前者的整体热阻比铜钼法兰器件的整体热阻低18.7%,器件内部各层材料的温度分布显示铜/石墨复合物法兰在器件中的热阻占比相比铜钼法兰在器件中的热阻占比低13%,这证明使用高热导率铜/石墨复合物法兰封装提高GaN器件热扩散性能的有效性.通过对两种GaN器件热阻占比的测量与分析,发现除了封装法兰以外,热阻占比最高的是GaN外延与衬底材料之间的界面热阻,降低界面热阻是进一步提高器件热性能的关键.同时,详细阐述了使用拉曼光热技术测量GaN器件结温和热阻的原理和过程,展示了拉曼光热技术作为一种GaN器件热特性表征方法的有效性.     

Noninvasive Temperature Measurement in Dental Materials Using Nd3+, Yb3+ Doped Nanoparticles Emitting in the Near Infrared Region

In this work, the application of near infrared (NIR)-emitting NaYbF₄:1%Tm³⁺@NaLuF₄:30%Nd³⁺ core–shell nanoparticles is reported for noninvasive probing and monitoring the temperature during photopolymerization of dental materials. When excited at 808 nm, the synthesized nanoparticles emit NIR photoluminescence (PL) with two distinctive peaks at 865 and 980 nm which correspond to radiative transitions from the doped Nd³⁺ and Yb³⁺ ions, respectively. Luminescence intensity ratio between these two bands is found to vary with temperature due to temperature-dependent electronic excitation energy transfer between Nd³⁺ and Yb³⁺ ions at the core/shell interface. This finding allows luminescence ratiometric evaluation of the in situ temperature during photopolymerization of resin cement (doped with nanoparticles) in a veneer placement procedure. In addition, the NIR emission also enables PL imaging of the distribution of the adhesive under the veneer. The results highlight that rare-earth ions–doped nanoparticles with both excitation and emission in the NIR spectral range are advantageous for both PL-based nanothermometry and imaging due to the reduced attenuation of NIR light by dental ceramics.     

Development of rotational CARS for combustion diagnostics using a polarization approach

Rotational Coherent anti-Stokes Raman spectroscopy (CARS) has the last decades been developed into a useful tool for thermometry and concentration measurements in combustion. In this paper, we present a novel polarization approach of the technique, which will enhance its potential and widen the range of conditions at which it can be utilized. The theory of the polarization approach is described in detail. It is shown that by specific arrangement of the polarizations of the laser beams, total suppression of the non-resonant background signal can be obtained, and thus by probing only the resonant CARS signal the diagnostic utility of the technique increases. The main benefit of the approach is in situations where the non-resonant background signal is relatively high in comparison with the resonant signal. The high potential of polarization rotational CARS for thermometry is demonstrated in some illustrative examples, for example, nitrogen thermometry on the fuel side of diffusion flames, and carbon monoxide thermometry in the product gas of ethylene/oxygen/argon-flames.     

On the Development of the Temperature Concept

A brief outline of the history of development of the temperature concept in physics is given. Simultaneously, some persisting imperfections in the conceptual basis of classical thermodynamics closely related to the first and the second law of thermodynamics are discussed. This revised version was published online in August 2006 with corrections to the Cover Date.