Combustion properties of H2/N2/O2/steam mixtures

The present work reports new experimental and numerical results of the combustion properties of hydrogen based mixtures diluted by nitrogen and steam. Spherical expanding flames have been studied in a spherical bomb over a large domain of equivalence ratios, initial temperatures and dilutions at an initial pressure of 100 kPa (T_ini = 296, 363, 413 K; N₂/O₂ = 3.76, 5.67, 9; %Steam = 0, 20, 30). From these experiments, the laminar flame speed $S_L^0$, the Markstein length L’, the activation energy Ea and the Zel'dovich β number have been determined. These parameters were also simulated using COSILAB^® in order to verify the validity of the Mével et al. [1] detailed kinetic mechanism. Other parameters as the laminar flame thickness δ and the effective Lewis number Le_eff were also simulated. These new results aim at providing an extended database that will be very useful in the hydrogen combustion hazard assessment for nuclear reactor power plant new design.     

含气率对PTS时压力容器内流动与传热的影响

本文对反应堆压力容器紧急安注时的流动与传热特性在1/10的模型上进行了流动可视化、局部传热系数以及混合函数的试验研究。针对三个热冲击敏感区域的部分测点,比较了环腔流速为0.5m/s、安注流速为1～30 m/s时不同含气率对下降环腔内流动与传热特性的影响,得出并分析了不同测点传热系数、混合函数的变化规律。研究结果表明:随着含气率增大,安注流体与环腔流体的混合增强;下降环腔内的含气率对小安注流速时的流动与传热影响显著,而对大安注流速时影响较小。     

SWITRIM��������ƺ�ʹ�øſ�

研制出了用于计算氚投料量在FEB聚变堆各个子系统中的分布及其随时间变化的数值模拟程序包SWITRIM。通过近5年的使用，表明其运行良好、计算结果可靠。用SWITRIM数值模拟研究了聚变堆起动过程中的“氚坑深度和氚坑时间”新现象。简单介绍了SWITRIM程序包的组成和用户使用说明以及最新的运用等。     

反恐怖安全检测技术的物理基础

反恐怖安全检测技术已成为人们的热门话题。安全检测技术的诞生和发展离不开物理学家的贡献。物理学为反恐怖安全检测孕育了多种手段和方法。文章简要介绍了X射线探测、γ射线探测、四极共振分析、脉冲式快中子分析、离子迁移率光谱测量、毫米波探测、声学探测、磁场探测、电磁脉冲探测等安全检测技术的物理基础。     

Molecular dynamics simulations on the structures and properties of ε-CL-20-based PBXs ——Primary theoretical studies on HEDM formulation design

Five polymer bonded explosives (PBXs) with the base explosive ε-CL-20 (hexanitrohexaazaisowurtzi- tane), the most important high energy density compound (HEDC), and five polymer binders (Estane 5703, GAP, HTPB, PEG, and F2314) were constructed. Molecular dynamics (MD) method was employed to investigate their binding energies (Ebind), compatibility, safety, mechanical properties, and energetic properties. The information and rules were reported for choosing better binders and guiding formula- tion design of high energy density material (HEDM). According to the calculated binding energies, the ordering of compatibility and stability of the five PBXs was predicted as ε-CL-20/PEG > ε-CL-20/ Estane5703 ≈ε-CL-20/GAP > ε-CL-20/HTPB > ε-CL-20/F2314. By pair correlation function g(r) analyses, hydrogen bonds and vdw are found to be the main interactions between the two components. The elasticity and isotropy of PBXs based ε-CL-20 can be obviously improved more than pure ε-CL-20 crystal. It is not by changing the molecular structures of ε-CL-20 for each binder to affect the sensitivity. The safety and energetic properties of these PBXs are mainly influenced by the thermal capability (C°p) and density (ρ) of binders, respectively.     

安全质量费用工期在网络计划中的系统优化研究

施工网络计划中安全、质量、费用、工期达到综合优化是工程管理决策追求的目标,在工程项目管理中对这4个指标进行全面系统分析,并且进行综合均衡优化,对于提高工程项目的综合效益至关重要.采取在网络计划所有可行的施工方案中寻求最优的方案组合,从而达到总目标的优化.并且通过一个实例来说明本方法的应用.     

在线氧含量分析中的自动反吹

为解决在线氧含量分析测试仪表常被聚合物堵塞的问题，提出了自动反吹的时序分配和实施控制方案，从而为安全生产提供了保障。     

Development of a new analytical method for the evaluation of hazards from slow decomposition of waste streams and process solutions

A wide variety of liquid streams are generated as part of the process research and development effort. Frequently these streams are drummed off, either as intermediates that must be held for processing or as wastes that must be sent off-site for disposal. Because of the long times and low concentrations often involved, current thermoanalytical techniques were inadequate to detect the potential of streams to generate gas. A custom-made apparatus, the gas evolution test cell (GETC), was developed in the Merck Research Laboratories to measure the gas generation potential of various streams under precisely defined conditions, is the key innovation for the development of a quantitative gas-generation test method.     

Addressing the metabolic activation potential of new leads in drug discovery: a case study using ion trap mass spectrometry and tritium labeling techniques

Metabolic activation of drug candidates to electrophilic reactive metabolites that can covalently modify cellular macromolecules may result in acute and/or idiosyncratic immune system-mediated toxicities in humans. This presents a significant potential liability for the future development of these compounds as safe therapeutic agents. We present here an example of an approach where sites of metabolic activation within a new drug candidate series were rapidly identified using online liquid chromatography/multi-stage mass spectrometry on an ion trap mass spectrometer. This was accomplished by trapping the reactive intermediates formed upon incubation of compounds with rat and human liver microsomes as their corresponding glutathione conjugates and mass spectral characterization of these thiol adducts. Based on the structures of the GSH adducts identified, potential sites and mechanisms of bioactivation within the chemical structure were proposed. These metabolism studies were interfaced with iterative structural modifications of the chemical series in order to block these bioactivation sites within the molecule. This strategy led to a significant reduction in the propensity of the compounds to undergo metabolic activation as evidenced by reductions in the irreversible binding of radioactivity to liver microsomal material upon incubation of tritium-labeled compounds with this in vitro system. With the efficiency and throughput achievable with such an approach, it appears feasible to identify and address the metabolic activation potential of new drug leads during routine metabolite identification studies in an early drug discovery setting.     

成像技术在食品安全与质量控制中的研究进展

食品质量与安全是政府、食品行业以及消费者十分关注的问题。为了保证食品质量与安全，需要对食品中的风险因子进行检测。传统的分析方法如生物化学方法和仪器分析方法（色谱法、色谱-质谱法）存在前处理比较复杂，耗时，对样品具有破坏性及无法获取目标物空间信息等缺点。因此，开发快速，无损，实时和可视化的检测技术十分重要，这也是食品领域研究的热点。近年来，高光谱成像技术融合了成像和光谱两种技术，可以作为一种用于食品质量和安全评估的非破坏性和实时检测的工具。拉曼光谱成像技术可以同时获得待测物的光谱和空间信息，具有快速，无损和低成本等优点，在食品安全评价和质量控制中也得到了成功应用。质谱成像技术不需要标记和染色，即可实现样品组织表面待测物的可视化和高通量分析。它作为一种分子可视化技术，可以获得食品中营养成分及内、外源性有害物质的空间分布信息，在食品领域也表现出良好的应用前景。本文检索了近几年国内外发表的成像技术在食品研究中的相关文献，介绍了高光谱成像技术、拉曼光谱成像技术和质谱成像技术的原理，并综述了它们在食品安全与质量控制中的应用。此外，本文分析和讨论了这几种成像技术的优缺点，并对成像技术在食品领域的发展前景做出了展望。