气垫导轨在刚体转动惯量测定实验中的应用

本文介绍了一种测量刚体转动惯量的新方法。即把气垫导轨和刚体转动仪结合起来来测量刚体的转动惯量,使传统的气垫导轨实验和刚体转动惯量测定实验得以更新,提高了实验测量的精度,拓展了实验内容。     

一种简易云雾室的制作

本文利用自制云雾室把微观粒子的运动转化为宏观现象，从而供实验观察和研究。     

Indoor radon measurements in dwellings of four Saudi Arabian cities

An indoor radon survey of a total of 269 dwellings, with one dosimeter per house, distributed in four Saudi Arabian cities was carried out. The objective of this survey was to carry out indoor radon measurements of two cities in the Eastern Province, Khafji and Hafr Al-Batin and to compare this with two cities in the Western Province, Al-Madina and Taif. The survey provides additional information about indoor radon concentrations in Saudi Arabia. The results of the survey in these cities showed that the overall minimum, maximum and average radon concentration were 7,137 and 30 Bqm⁻³, respectively. The lowest average radon concentration (20 Bqm⁻³) was found in Hafr Al-Batin, while the highest average concentration was found in Khafji (40 Bqm⁻³).     

Uniformity in radon exhalation from construction materials using can technique

The uniformity in radon exhalation rates for 46 tiles of granite, marble and ceramic used as construction materials were determined using “Can Technique” employing CR-39 nuclear track detectors (NTDs). On each tile, two sealed cans, each enclosing one NTD fixed at the center of the tile surface area covered by the can, were mounted at two different locations of each individual tiles. The track production rates on the NTDs representing radon exhalation rates were measured. The radon exhalation rates from the surface of individual tiles showed uniform exhalations within the calculated uncertainties of the measured values. This makes Can Technique an alternative simple method to measure radon exhalation rates. Calibration required to convert track production rates into radon exhalation rates for the used can and NTD was done using an active technique. The correlation between the measurements by the two techniques shows a good linear correlation coefficient (0.83).     

线性规划的符号跟踪算法

分析了只含一个约束条件的线性规划最优基变量的特征，将其运用到搜寻含m个约束条件的线性规划的最优基变量，从而提出了线性规划的符号跟踪算法，为线性规划求解提供了新途径。     

The effect of simultaneous temperature, pressure and stress on the experimental annealing of spontaneous fission tracks in apatite: a brief overview

Tracks made in minerals by the electronic stopping of uranium fission fragments provide a modern geological dating tool, and are believed also to yield specific information on the low-temperature thermal history of rocks. Experimental work showing that the damaged crystal lattice along a fission track recovers primarily as a function of temperature ignored the fact that the basic theory of atomic diffusion requires an exponential decrease in the intrinsic diffusion coefficient with increasing pressure. Here, fission track recovery was experimentally investigated in basic apatite under the simultaneous influences of temperature, pressure and stress. We show that track fading is a complex recovery mechanism responding to several environmental physical parameters simultaneously. In particular a strong decrease in the track recovery rate was observed as a function of increasing pressure. And a nearly temperature-independent recovery was observed in samples under stress.     

Important unanswered questions—1970

This paper was given as the opening address at the 1970 Albany International Conference on Radiation Effects in Semiconductors, and it attempts to establish a general overview of the field by concentrating on recent research developments and important unanswered questions. The continuing importance of impurity-defect interactions, of microscopic defect identification, and of the necessity for more theoretical calculations are emphasized. The rapid development of the field of ion implantation and its close relationship with radiation effects studies are pointed out. It is predicted that research in compound semiconductors will increase rapidly with close beneficial interaction with ion implantation studies.     

Study of indoor radon and thoron progeny levels in surrounding areas of Nalbari, Assam, India

With the growing understanding of the role of radon and its daughter products as major sources of radiation exposure, the importance of large number of estimation of radon concentration in various parts of the country is realized. Inhalation of radon, thoron and their decay products is the major source of the total radioactive dose received by the human population from natural radiation. The indoor radon and thoron progeny levels in Nalbari area of Assam are studied by using the LR-115 (type II) Solid State Nuclear Track Detector in Plastic Twin Chamber dosimeter. Radon and thoron progeny levels in different types of dwellings for one full calendar year are presented in this paper. For Assam Type (A.T.) houses, indoor radon progeny concentrations vary from 0.17 to 0.64 mWL with an annual geometric mean of 0.27 mWL and that for Reinforced Cement Concrete (R.C.C.) houses vary from 0.22 mWL to 0.60 mWL with the annual geometric mean of 0.37 mWL. The thoron progeny levels in A.T. houses also vary from 0.01 to of 0.05 mWL with an annual geometric mean of 0.02 mWL and that for R.C.C. houses vary from 0.02 to 0.08 mWL with the annual geometric mean of 0.04 mWL.      

Comparative analysis of CR-39 sensitivity for different sets of measurable track parameters

In the present paper the sensitivity V of plastic nuclear track detectors CR-39 to the space radiation, accelerated heavy ions in wide LET range and α-particles is studied. Different approaches for V evaluation are considered and compared. Main attention is given to the method that is appropriate for the measurement of short range heavy secondaries of space radiation. Finally, the experimental verification of the designed V function is carried out via simulation of the secondaries with low energy α-particles in the vicinity of the Bragg peak.     

基于电子病历的乳腺癌群组与治疗方案可视分析

乳腺癌是当前最常见的恶性肿瘤之一,其电子病历数据可用于挖掘隐含规律,对治疗与预后分析有重要意义。通过与乳腺科医生合作,选择合适的预测模型和可视化方法,搭建了一个基于电子病历的乳腺癌群组和治疗方案可视分析系统。首先,对具有高维属性的病人进行降维和聚类处理,形成病人群组,并采用南丁格尔图、词云和时间轴可视化方法,直观展示病人群组间特征的差异;然后,用支持向量机（support vector machine,SVM）模型预测治疗方案,用平行坐标、矩阵热力图和分类图分别展示属性相关性、训练后的特征权重和预测结果;最后,用真实案例验证了系统在群组分析、治疗方案及病人属性关联分析中的有效性,从而较好地帮助医生选择合适的治疗方案。