Measuring Light Field of Light Source with High Directional Resolution Using Mirrored Ball and Pinhole Camera

This paper presents a method of measuring a light field of a light source with high directional resolution using a mirrored ball and a pinhole camera. The light field describes a spatial and directional distribution of radiances from the light source. The directional distribution is expanded by a reflection on the mirrored ball, and the radiances are measured by a charge-coupled device (CCD) camera with a pinhole lens. The light source is laterally moved by a robot arm to measure the directionally expanded light field, and each pixel on a CCD can obtain the radiances from the light source through the pinhole lens with high directional resolution. The light field is estimated from the pixel value and the position of each pixel using a ray tracing technique. The light field of a krypton lamp was experimentally measured by the proposed method, and the accuracy of the measurement was evaluated against the irradiances measured by a spectro-radiometer at sample points.     

Stable marker-particle method for the Voronoi diagram in a flow field

The Voronoi diagram in a flow field is a tessellation of water surface into regions according to the nearest island in the sense of a “boat-sail distance”, which is a mathematical model of the shortest time for a boat to move from one point to another against the flow of water. The computation of the diagram is not easy, because the equi-distance curves have singularities. To overcome the difficulty, this paper derives a new system of equations that describes the motion of a particle along the shortest path starting at a given point on the boundary of an island, and thus gives a new variant of the marker-particle method. In the proposed method, each particle can be traced independently, and hence the computation can be done stably even though the equi-distance curves have singular points.     

Tracing of interference fringes using average gray value and simultaneous row and column scan

An algorithm for computer tracing of interference fringes is reported. The method uses the average gray-level value for thresholding, row and column scans for determining the type of the scan and simultaneous row and column scan for tracing. The proposed method yield good result even for low-contrast and high-noise images. The program for the interferogram tracing was written using MATLAB6.     

高次非球面光路计算中的两个重要问题

提出在高次非球面的光路计算中运用变曲率的“辅助球面”概念,对某些文献在此方面存在的问题进行分析,提出迭代逼近精度的数值判据及浮动处理方法。     

Simple test system for single molecule recognition force microscopy

We have established an easy-to-use test system for detecting receptor-ligand interactions on the single molecule level using atomic force microscopy (AFM). For this, avidin-biotin, probably the best characterized receptor-ligand pair, was chosen. AFM sensors were prepared containing tethered biotin molecules at sufficiently low surface concentrations appropriate for single molecule studies. A biotin tether, consisting of a 6 nm poly(ethylene glycol) (PEG) chain and a functional succinimide group at the other end, was newly synthesized and covalently coupled to amine-functionalized AFM tips. In particular, PEG₈₀₀ diamine was glutarylated, the mono-adduct NH₂-PEG-COOH was isolated by ion exchange chromatography and reacted with biotin succinimidylester to give biotin-PEG-COOH which was then activated as N-hydroxysuccinimide (NHS) ester to give the biotin-PEG-NHS conjugate which was coupled to the aminofunctionalized AFM tip. The motional freedom provided by PEG allows for free rotation of the biotin molecule on the AFM sensor and for specific binding to avidin which had been adsorbed to mica surfaces via electrostatic interactions. Specific avidin-biotin recognition events were discriminated from nonspecific tip-mica adhesion by their typical unbinding force (∼40 pN at 1.4 nN/s loading rate), unbinding length (<13 nm), the characteristic nonlinear force-distance relation of the PEG linker, and by specific block with excess of free d-biotin. The convenience of the test system allowed to evaluate, and compare, different methods and conditions of tip aminofunctionalization with respect to specific binding and nonspecific adhesion. It is concluded that this system is well suited as calibration or start-up kit for single molecule recognition force microscopy.     

Revealing the Cell Entry Dynamic Mechanism of Single Rabies Virus Particle

The rabies virus is a neurotropic virus that causes fatal diseases in humans and animals. Although studying the interactions between a single rabies virus and the cell membrane is necessary for understanding the pathogenesis, the internalization dynamic mechanism of single rabies virus in living cells remains largely elusive. Here, we utilized a novel force tracing technique based on atomic force microscopy(AFM) to record the process of single viral entry into host cell. We revealed that the force of the rabies virus internalization distributed at (65±25) pN, and the time was identified by two peaks with spacings of (237.2±59.1) and (790.3±134.4) ms with the corresponding speed of 0.12 and 0.04 μm/s, respectively. Our results provide insight into the effects of viral shape during the endocytosis process. This report will be meaningful for understanding the dynamic mechanism of rabies virus early infection.     

Bacteria and cancer cell pearl chain under dielectrophoresis

In this work, we aim to observe and study the physics of bacteria and cancer cells pearl chain formation under dielectrophoresis (DEP). Experimentally, we visualized the formation of Bacillus subtilis bacterial pearl chain and human breast cancer cell (MCF-7) chain under positive and negative dielectrophoretic force, respectively. Through a simple simulation with creeping flow, AC/DC electric fields, and particle tracing modules in COMSOL, we examined the mechanism by which bacteria self-organize into a pearl chain across the gap between two electrodes via DEP. Our simulation results reveal that the region of greatest positive DEP force shifts from the electrode edge to the leading edge of the pearl chain, thus guiding the trajectories of free-flowing particles toward the leading edge via positive DEP. Our findings additionally highlight the mechanism why the free-flowing particles are more likely to join the existing pearl chain rather than starting a new pearl chain. This phenomenon is primarily due to the increase in magnitude of electric field gradient, and hence DEP force exerted, with the shortening gap between the pearl chain leading edge and the adjacent electrode. The findings shed light on the observed behavior of preferential pearl chain formation across electrode gaps.     

用蒙特卡罗光子追迹方法分析闪光灯的结构设计

闪光灯反光罩结构设计的目标是使得所拍摄视场内的光能量分布尽量均衡。不同于基于几何光学理论的闪光灯计算和设计方法,采用了蒙特卡罗光子追迹法来分析闪光灯的结构设计。通过对照相机闪光灯几何结构的分析,引入余弦随机变量等方法,建立了闪光灯系统中光源、反光罩、菲涅耳透镜等部件的数学模型。先用蒙特卡罗光子追迹法模拟了单光子在闪光灯中飞行的各种可能状态,再通过产生大量光子仿真真实的情况。并对一个具体的闪光灯结构进行了计算,计算得到了光强和光子方向矢量在水平、垂直两个方向的投影角之间的分布曲线图。仿真结果符合设计要求并与实测曲线很接近,从而验证了蒙特卡罗光子追迹法在闪光灯结构设计中的可行性。     

基于相移偏折法的高反射表面面形测量技术

利用单相机所采集的图像实现了对光滑高反射表面面形的直接检测.首先利用相机获取参考平面在标准平面镜中的镜像,然后通过参考平面上的点与归一化成像平面上图像点之间的密集折返对应关系,求得待测镜面的深度距离,从而实现对高反射表面面形的测量.通过光线追迹将该测量过程转化为求解物空间中关于两对应光线束之间的相交问题.以相位为载体获取面形梯度分布,求得该表面的法向量场,并求解相应的反射光线束.通过光线追迹对该光线束与相应入射光线束求“交点”检测高反射表面.对标准平面镜进行实验检测,测量得到的面形平面度为0.19 mm.采用传统方法与本文所提方法对汽车后视镜进行检测,所得检测结果对应点之间的平均距离为0.15 mm,验证了本文方法检测镜面面形的有效性.