Fracture toughening of epoxy matrices with blends of resins of different molecular weights and other modifiers

The microstructure and fracture behavior of epoxy mixtures containing two monomers of different molecular weights were studied. The variation of the fracture toughness by the addition of other modifiers was also investigated. Several amounts of high‐molecular‐weight diglycidyl ether of bisphenol A (DGEBA) oligomer were added to a nearly pure DGEBA monomer. The mixtures were cured with an aromatic amine, showing phase separation after curing. The curing behavior of the epoxy mixtures was investigated with thermal measurements. A significant enhancement of the fracture toughness was accompanied by slight increases in both the rigidity and strength of the mixtures that corresponded to the content of the high‐molecular‐weight epoxy resin. Dynamic mechanical and atomic force microscopy measurements indicated that the generated two‐phase morphology was a function of the content of the epoxy resin added. The influence of the addition of an oligomer or a thermoplastic on the morphologies and mechanical properties of both epoxy‐containing mixtures was also investigated. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3920–3933, 2004     

Toughening of epoxies via craze-like damage

The fracture behavior of a core-shell rubber (CSR) modified epoxy is investigated using both fracture mechanics and microscopy tools. The CSR-modified epoxy is found to be toughened via numerous line-array cavitations of the CSR particles, followed by plastic flow of the epoxy matrix. The toughening effect via the above craze-like damage process is found to be as effective as that of the well-known widespread rubber cavitation/matrix shear yielding mechanisms. The conditions for triggering the craze-like damage appear to be both stress state and rubber concentration dependent. The type of rubber tougheners utilized also plays a critical role in triggering this rather unusual craze-like damage in epoxy systems. © 1993 John Wiley & Sons, Inc.     

CTBN-TOUGHENED EPOXY RESINS——EFFECT OF CURING MECHANISM ON NETWORK STRUCTURE OF THE RUBBER PHASE

Epoxy resins toughened with carboxyl-terminated butadieneacrylonitrile copolymers (CTBN) are two-phase thermosets. The network of the in situ formed rubber particles depends upon the curing mechanism of the resin. When a primary polyamine such as triethylene tetramine was used as curing agent, the network of the rubber phase was quite incomplete, whereas a perfect rubber network was formed with 2-ethyl-4-methyl imidazole as the curing agent.     

界面作用对HDPE/POEg/CaCO_3三元复合材料韧性的影响

通过界面改性,制备了以CaCO3为核,马来酸酐接枝乙烯-辛烯共聚物弹性体(POEg)为壳的高密度聚乙烯(HDPEg)/弹性体(POE)/CaCO3的三元复合材料.由于“核-壳”结构的形成,弹性体和CaCO3表现出协同的增韧作用.同未经表面处理的CaCO3复合材料相比,在相同的CaCO3含量的情况下,表面处理的CaCO3由于与弹性体形成更强的界面粘结,使得三元复合材料的“脆-韧”转变发生在较低的弹性体含量.     

双马来酰亚胺增韧研究Ⅱ.链扩展双马来酰亚胺及其树脂的合成及表征

合成了一系列结构不同和链长短不一的双马来酰亚胺，并对其结构和性能作了表征，同时研究了它们的固化反应和固化产物的性能。用双马来酰亚胺和二烯丙基化合物反应制造了增韧树脂，研究了该树脂的固化和热稳定性。     

高抗冲聚苯乙烯的增韧机理

概述了以高抗冲聚苯乙烯（ＨＩＰＳ）为中心的有关橡胶增韧机理的理论，并且总结了界面，性能、粒子尺寸、粒 距及缠结密度等因素对橡胶／高分子共混体系性能的影响。     

Fracture mechanisms in rigid core-shell particle modified high performance epoxies

The fracture mechanisms of a high performance epoxy system modified with two types of preformed rigid core-shell particles (RCSP) were investigated. The use of the preformed RCSP anables the control of the dispersion of the toughener phase in the epoxy, which, in turn, allows the mechanical properties of the modified epoxy to be optimized. The toughening effect via the RCSP modification is found to be as good as that via the core-shell rubber modification. The moduli andT _g of these RCSP-modified epoxies are virtually unaltered via the RCSP modification, when compared with the neat epoxy resin equivalent. The toughening mechanisms in these toughened systems appear to be predominantly crack deflection, crack bifurcation, and microcracking. Approaches for effective toughening of high performance polymers via rigid polymers are discussed.     

Flame‐retardant and mechanical properties of phenolic foams toughened with polyethylene glycol phosphates

Three kinds of polyethylene glycol phosphates (PEGPs) toughening agents were synthesized by esterification of phosphorus pentoxide (P₂O₅) with polyethylene glycol and characterized by Fourier transform infrared spectra and ³¹P nuclear magnetic resonance. A series of lightweight phenolic foams toughened with different loadings of PEGPs were prepared. Optical microscopy results show that the addition of PEGPs with small molecular weight PEG improves the structural homogeneity of phenolic foams obviously. The flame retardancy of toughened phenolic foams was evaluated by using UL 94, limiting oxygen index, and cone calorimeter. The results indicate that the incorporation of PEGPs not only increases the toughness of phenolic foams but also improves their flame retardancy. Moreover, the thermal stability of PEGPs and the toughened foams was investigated by thermogravimetric analysis. Copyright © 2013 John Wiley & Sons, Ltd.     

TPU增韧MABS的研究

利用双螺杆挤出机制备聚氨酯和甲基丙烯酸甲酯—丙烯腈-丁二烯-苯乙烯树脂熔融共混物(合金).研究TPU的类型以及含量对TPU/MABS合金的透光率、力学性能和缺口冲击强度影响.结果表明:TPU/MABS合金可以保持较好透明性,随TPU含量的增加,合金材料的拉伸强度和弯曲模量逐渐降低,但是合金材料的冲击强度得到明显提高.扫...     

Structured latex particles as impact modifiers for poly(styrene–co-acrylonitrile) blends

This work was focused on the influence of the morphology of composite natural rubber (NR)-based particles on the toughness of poly(styrene–co-acrylonitrile) (PSAN) blends. In order to be suitable for the reinforcement of PSAN blends, the NR-based particles were coated with a shell of crosslinked poly(methylmethacrylate) (PMMA). Furthermore, polystyrene (PS) subinclusions were introduced into the NR rubber core. PSAN blends were prepared by adding the wet latex directly into a twin screw-extruder. This new method allowed even tacky pure rubber particles to be dispersed as shown by transmission electron photomicrographs which confirmed the integrity of the soft particles after mixing. Solid NR particles or NR-based latex particles containing rigid PS subinclusions and no hard shell did not offer any impact improvement to PSAN. Only NR-based core–shell particles containing at least 25% PMMA in the shell toughened the brittle matrix. Prevulcanized NR-based latex particles which do not cavitate easily were less effective. Core–shell particles containing PS subinclusions within a natural rubber core allowed more effective use of the rubber phase. From the fracture surface morphology the failure mechanisms of PSAN blends containing the different composite NR particles could be deduced. Monodisperse poly(n-butylacrylate)-based core–shell particles were too small to toughen PSAN. However, a similar dependence of the fracture mechanisms on the morphology of the incorporated toughening agent could be established by scanning electron microscopy.