Beyond Stereoselectivity,Switchable Catalysis: Some of the Last Frontier Challenges in Ring‐Opening Polymerization of Cyclic Esters

Metal‐based catalysts and initiators have played a pivotal role in the ring‐opening polymerization (ROP) of cyclic esters, thanks to their high activity and remarkable ability to control precisely the architectures of the resulting polyesters in terms of molar mass, dispersity, microstructure, or tacticity. Today, after two decades of extensive research, the field is slowly reaching maturity. However, several challenges remain, while original concepts have emerged around new types or new applications of catalysis. This Review is not intended to comprehensively cover all of these aspects. Rather, it provides a personal overview of the very recent progress achieved in some selected, important aspects of ROP catalysis—stereocontrol and switchable catalysis. Hence, the first part addresses the development of new metal‐based catalysts for the isoselective ROP of racemic lactide towards stereoblock copolymers, and the use of syndioselective ROP metal catalysts to control the monomer sequence in copolymers. A second part covers the development of ROP catalysts—primarily metal‐based catalysts, but also organocatalysts—that can be externally regulated by the use of chemical or photo stimuli to switch them between two states with different catalytic abilities. Current challenges and opportunities are highlighted.     

High-throughput concept for tailoring switchable mirrors

The optical properties, the switching kinetics and the lifetime of hydrogen switchable mirrors based on Mg-Ni alloys are determined with particular regard to the composition of the optically active metal-hydride layer in combination with the thickness of the catalytic capping layer. For this, a high-throughput experiment is introduced. The switching kinetics and the reversibility of switchable mirrors are strongly thickness dependent, though the details hinge on the fine structure of the clustered capping layer. Therefore, the kinetics is correlated with the surface structures of Pd on Mg_yNi_1−y as investigated by scanning tunneling microscopy. The results are explained by the so-called strong metal-support interaction (SMSI) state, characterized by a complete encapsulation of the capping layer clusters by oxidized species originating from the support. The SMSI-effect is less important with increasing Pd-layer thickness, and is suppressed by a good wetting of the Pd-clusters on the optically active film. This explains the critical thickness for the catalyzed hydrogen uptake observed in many switchable mirror systems. Moreover, the degradation of the kinetics during cycling is found to depend on the Pd-layer thickness and on the gas environment. Only films, covered with at least 15 nm Pd, show small degradation caused by the SMSI-effect. The SMSI-effect is partly reversible: after changing the gas environment from hydrogen to oxygen, the oxide on the Pd-clusters can be partly removed.     

Dynamics of phase transitions in a liquid crystal probed by Raman spectroscopy

Raman spectra of the Schiff 's base liquid crystalline compound 5O5, N-(4- n-pentyloxybenzylidene)-4'-n-pentylaniline, have been recorded as a function of temperature from 22 to 80°C in the 1140-1220 cm^-1 and 1550-1640 cm^-1 spectral regions. From careful deconvolution of the spectral features using Lorentzian profiles, precise values of peak positions, integrated intensities and linewidths of some selected Raman bands were obtained. The variations of the Raman spectral parameters with temperature are discussed in terms of changes in the molecular alignment and its effect on intra-/inter-molecular interactions at the Cr-G, G-SmF, SmF-SmC and SmA-N phase transitions. From a detailed study, it is inferred that the increased orientational/vibrational freedom of the alkyl chains, as well as the delocalization of the electron clouds, is responsible for the spectral anomalies at the Cr-G transition. Loss of positional ordering and twist around the -C₆H₄-N= bond takes place at the SmF-SmC transition. In the SmA-N transition, some evidence for the formation of cybotactic clusters was obtained.     

Switchable peptide-equipped protein/cucurbit[7]uril supramolecular assembly for targeted drug delivery

ABSTRACT

Herein, we develop a switchable peptide-equipped protein/cucurbit[7]uril (CB[7]) supramolecular assembly as novel targeted drug vector. Specifically, bovine serum albumin (BSA) is used to interact with CB[7], serving as the core of drug vector. Then, a peptide shield layer is formed on the surface of BSA/CB[7], yielding peptide-equipped supramolecular assembly (Pep@BSA@CB[7]). The equipped peptide shield layer is composed of switchable peptide probes consisting of a polycationic cell-penetrating peptide (CPP) motif, a polyanionic motif and a linking motif, and therefore provides a variety of desirable properties. First, the CPP motif displays excellent cell penetration ability and can facilitate internalisation of the drug vector. Secondly, the polyanionic motif performs intramolecular electrostatic interaction with CPP motif and thereby can reduce non-targeted delivery towards normal cells. Thirdly, the linking motif can be specifically cleaved by matrix metalloproteinases 2 that is up-regulated in tumour microenvironment, thus enabling precise cancer-targeting. As a consequent, Pep@BSA@CB[7] can serve as a promising drug vector that exhibits superior targeting ability and high uptake efficiency towards cancer cells, which may be of great potential in cancer-targeted treatment.     

Redox‐Switchable Ring‐Closing Metathesis: Catalyst Design,Synthesis, and Study

High yielding syntheses of 1‐(ferrocenylmethyl)‐3‐mesitylimidazolium iodide ( 1 ) and 1‐(ferrocenylmethyl)‐3‐mesitylimidazol‐2‐ylidene ( 2 ) were developed. Complexation of 2 to [{Ir(cod)Cl}₂] (cod=cis,cis‐1,5‐cyclooctadiene) or [Ru(PCy₃)Cl₂(?CH‐o‐O‐iPrC₆H₄)] (Cy=cyclohexyl) afforded 3 ([Ir( 2 )(cod)Cl]) and 5 ([Ru( 2 )Cl₂(?CH‐o‐O‐iPrC₆H₄)]), respectively. Complex 4 ([Ir( 2 )(CO)₂Cl]) was obtained by bubbling carbon monoxide through a solution of 3 in CH₂Cl₂. Spectroelectrochemical IR analysis of 4 revealed that the oxidation of the ferrocene moiety in 2 significantly reduced the electron‐donating ability of the N‐heterocyclic carbene ligand (ΔTEP=9 cm^?1; TEP=Tolman electronic parameter). The oxidation of 5 with [Fe(η⁵‐C₅H₄COMe)Cp][BF₄] as well as the subsequent reduction of the corresponding product [ 5 ][BF₄] with decamethylferrocene (Fc*) each proceeded in greater than 95 % yield. Mössbauer, UV/Vis and EPR spectroscopy analysis confirmed that [ 5 ][BF₄] contained a ferrocenium species, indicating that the iron center was selectively oxidized over the ruthenium center. Complexes 5 and [ 5 ][BF₄] were found to catalyze the ring‐closing metathesis (RCM) of diethyl diallylmalonate with observed pseudo‐first‐order rate constants (k_obs) of 3.1×10^?4 and 1.2×10^?5 s^?1, respectively. By adding suitable oxidants or reductants over the course of a RCM reaction, complex 5 was switched between different states of catalytic activity. A second‐generation N‐heterocyclic carbene that featured a 1′,2′,3′,4′,5′‐ pentamethylferrocenyl moiety ( 10 ) was also prepared and metal complexes containing this ligand were found to undergo iron‐centered oxidations at lower potentials than analogous complexes supported by 2 (0.30–0.36 V vs. 0.56–0.62 V, respectively). Redox switching experiments using [Ru( 10 )Cl₂(?CH‐o‐O‐iPrC₆H₄)] revealed that greater than 94 % of the initial catalytic activity was restored after an oxidation–reduction cycle.     

Switching in Metal–Organic Frameworks

In recent years, metal–organic frameworks (MOFs) have become an area of intense research interest because of their adjustable pores and nearly limitless structural diversity deriving from the design of different organic linkers and metal structural building units (SBUs). Among the recent great challenges for scientists include switchable MOFs and their corresponding applications. Switchable MOFs are a type of smart material that undergo distinct, reversible, chemical changes in their structure upon exposure to external stimuli, yielding interesting technological applicability. Although the process of switching shares similarities with flexibility, very limited studies have been devoted specifically to switching, while a fairly large amount of research and a number of Reviews have covered flexibility in MOFs. This Review focuses on the properties and general design of switchable MOFs. The switching activity has been delineated based on the cause of the switching: light, spin crossover (SCO), redox, temperature, and wettability.     

电控聚合物分散液晶变焦全息透镜制作

介绍了相位型全息聚合物分散液晶(PDLC)材料全息透镜,在电场作用下液晶微滴折射率逐渐与聚合物折射率匹配,实现透镜电控变焦。研究了微米尺寸和纳米尺寸液晶微滴聚合物分散液晶材料配方特性和微观结构。采用优化纳米尺寸材料配方制作5~6μm聚合物分散液晶盒,采用离轴式平面波和球面波干涉全息写入光路,成功制作电控变焦聚合物分散液晶全息透镜样品。该透镜样品焦距为20 mm,能够正一级衍射放大成像。实现“0”,“1”变焦的驱动电压阈值为60 V。并进一步提出了基于聚合物分散液晶电控变焦元件集成叠加技术实现电控变焦光学成像系统的技术思路。     

Switchable solvent based liquid phase microextraction of palladium coupled with determination by flame atomic absorption spectrometry

A switchable solvent-based micro-extraction method for pre-concentration and separation of ultratrace palladium was developed prior to its flame atomic absorption spectrometric detection. Reverse change of hydrophilicity of N,N-dimethylcyclohexylamine (DMA) was achieved by reaction with carbonated water. The hydrophilic bicarbonate salt of the protonated DMA was used as extractant for palladium complexed with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (5-Br-PADAP). Formation of the hydrophobic form of switchable solvent from hydrophilic form of switchable solvent phase was achieved by addition of sodium hydroxide into the extractant-sample solution. The effect of key parameters affected extraction recovery was studied and optimised by using Plackett–Burman design, central composite design and three dimension (3D) surfaces response. The calibration plot was linear in the range 0.015–1.6 mg L^?1 of palladium with a correlation coefficient of 0.999. The limit of detections values of palladium for liquid and solid samples were 4.28 μg L^?1 and 0.54 µg g^?1, respectively. The pre-concentration factor was 37.5. The accuracy was confirmed by determination of palladium in certified reference material. The procedure was also applied for determination of palladium content of real samples as automotive catalytic converter, roadside dust, sea water and river water.     

A Chemically Triggered and Thermally Switched Dielectric Constant Transition in a Metal Cyanide Based Crystal

A dielectric constant transition is chemically triggered and thermally switched in (HPy)₂[Na(H₂O)Co(CN)₆] ( 2 , HPy=pyridinium cation) by single‐crystal‐to‐single‐crystal transformation and structural phase transition, respectively. Upon dehydration, (HPy)₂[Na(H₂O)₂Co(CN)₆] ( 1 ) transforms to its semi‐hydrated form 2 , accompanying a transition from a low‐dielectric state to a high‐dielectric state, and vice versa. This dielectric switch is also realized by a structural phase transition in 2 that occurs between room‐ and low‐temperature phases, and which corresponds to high‐ and low‐dielectric states, respectively. The switching property is due to the variation in the environment surrounding the HPy cation, that is, the hydrogen‐bonding interactions and the crystal packing, which exert predominant influences on the dynamics of the cations that transit between the static and motional states.