Observation of wavelength-switchable solitons in an all-polarization-maintaining erbium-doped fiber cavity based on graphene saturable absorber reflector

We present the generation of wavelength-switchable single-polarization solitons in an all-polarization-maintaining erbium-doped fiber laser mode-locked by a graphene saturable absorber. Ultrashort pulses centered at the wavelength of 1531.6 nm with the duration of 816 fs and centered at the wavelength of 1557.8 nm with the duration of 402 fs are separately obtained from the same fiber laser cavity. The cavity loss adjusted by the gold reflector plays a crucial role in wavelength switching.     

光谱带宽对单偏振光纤消光比的影响

消光比是表征单偏振光纤偏振性能好坏的特征参数之一,影响它的因素有很多,如光谱带宽。结合熊猫型单偏振光纤的测量,搭建了双轴光谱带宽测量系统,通过对单偏振光纤的光谱带宽、消光比参数的大量测量和分析,找到了光谱带宽对消光比参数影响的原因。结论是单偏振光纤的工作波长要远离光谱带宽的下限位置,即HE_(11y)模式的截止损耗峰,另外,要求HE_(11y)模式的截止损耗要陡峭,这样才能保证单偏振光纤具有高消光比特性。     

Design and analysis of a novel single-mode single-polarization photonic crystal fibre based on polarization-dependent coupling and absorption effect

A novel single-mode single-polarization (SMSP) photonic crystal fibre has been proposed and analysed based on the polarization-dependent coupling and absorption effect via a full-vector finite element method with perfectly matched layers. The numerical results predict that very efficient SMSP operation can be achieved with both high bandwidth and high extinction ratio at low loss penalty. Effects of the fibre structural parameters on the SMSP bandwidth and extinction ratio have been explored, which will provide useful guide for the design and fabrication of the fibre. The results obtained will be instructive for the realization of new SMSP fibres with high performance.     

Single-polarization single-mode hollow-core negative curvature fiber with nested U-type cladding elements

Hollow-core negative curvature fibers (HC-NCFs) have become one of the research hotspots in the field of optical fiber because of their potential applications in the data and energy transmissions. In this work, a new kind of single-polarization single-mode HC-NCF with nested U-type cladding elements is proposed. To achieve the single-polarization single-mode transmission, we use two different silica tubes in thickness, which satisfy the resonance and anti-resonance conditions on the U-type cladding elements and the cladding tubes, respectively. Besides, the elliptical elements are introduced to achieve good single-mode performance. By studying the influences of the structure parameters on the propagation characteristics, the optimized structure parameters are obtained. The simulation results show that when the wavelength is fixed at 1550 nm, the single-polarization single-mode transmission is achieved, with the polarization extinction ratio of 25749 and minimum high-order mode extinction ratio of 174. Furthermore, the confinement loss is only 0.0015 dB/m.     

新型空气孔长方形排列单模单偏振光子晶体光纤的数值模拟

提出了一种空气孔长方形排列的单偏振光子晶体光纤结构，并利用基于棱边/节点混合元的带有完全匹配层吸收边界条件的全矢量有限元方法对该结构进行了分析.对设计思路进行了详细说明.通过优化结构参数在理论上获得了波长在1.38—1.61 μm范围内仅有慢轴模且限制损耗低于0.1 dB/km的单模单偏振操作. 关键词： 光子晶体光纤 单偏振 限制损耗 全矢量有限元方法     

单偏振单模聚合物光子晶体光纤设计

 设计了一种聚甲基丙烯酸甲酯(PMMA)基的单偏振单模(SPSM)微结构聚合物光纤(MPOF)。利用全矢量有限元法和光束传播法相结合分析了这种光纤的偏振特性和约束损耗。通过优化光纤结构参数,发现在0.51 μm～0.62 μm的可见光波长范围,由于基模两个正交偏振模的截止波长不同,这种微结构聚合物光纤只能传输基模中的一个偏振模,从而实现单偏振单模运转。该11圈圆空气孔六角排列光纤结构的传导偏振模在0.57 μm波长处约束损耗仅为1.13 dB/m,这种低损耗的单偏振单模微结构聚合物光纤可有效消除传统保偏光纤固有的偏振串扰和偏振模色散。     

基于谐振吸收效应的单模单偏振光子晶体光纤研究

提出了一种基于谐振吸收效应的单模单偏振光子晶体光纤，阐述了其工作原理，并利用全矢量有限元法对其模场分布、限制损耗、工作带宽、消光比等基本特性进行了数值模拟. 数值结果表明这种结构可以获得很高的单模单偏振工作带宽，并能以较低的损耗代价实现极高的消光比.讨论了结构设计参量对光纤性能的影响.研究结果对设计新型的高性能单模单偏振光纤具有一定的指导意义.     

一种四排短轴渐减椭圆空气孔阵列的单模单偏振光子晶体光纤

提出了一种新型的四排短轴渐减椭圆空气孔阵列的单模单偏振光子晶体光纤结构,并以完美匹配层为边界条件采用全矢量有限元方法研究了该光纤的各种特性及其各种参量随入射波长变化规律.研究表明,提出的光子晶体光纤结构是实现更宽带宽、色散平坦、单模单偏振运用的有效方案;在入射光波长为1.550μm时,单模单偏振光子晶体光纤的模式双折射...     

Design of a Novel Mid-Infrared Single-Polarization Single-Mode Photonic Crystal Fiber with Low Loss,High Nonlinearity,and Large Bandwidth

ABSTRACT

A novel mid-infrared Ge₂₀Sb₁₅Se₆₅ chalcogenide-based single-polarization single-mode (SPSM) photonic crystal fiber (PCF) with rectangular latticed circular air holes is proposed. The properties of SPSM bandwidth, confinement loss, and nonlinearity are analyzed in the 3 μm~8 μm mid-infrared region using the finite -difference time-domain (FDTD) method. The influences of different geometrical parameters on the properties of SPSM-PCF are analyzed. All numerical computational results reveal that for the optimized geometrical parameters, the proposed PCF can deliver a SPSM region of more than 2.3814 μm with high nonlinearity of 3,705 w^?1 km^?1. Therefore, such a SPSM-PCF will become an excellent candidate for mid-infrared photonic.