Effects of Substrate Temperature on Helium Content and Microstructure of Nanocrystalline Titanium Films

Helium-charged nanocrystalline titanium films have been deposited by HeAr magnetron co-sputtering. The effects of substrate temperature on the helium content and microstructure of the nanocrystalline titanium films have been studied. The results indicate that helium atoms with a high concentration are evenly incorporated in the deposited titanium films. When the substrate temperature increases from 60℃ to 350℃ while the other deposition＇parameters are fixed, the helium content decreases gradually from 38.6 at.% to 9.2at.%, which proves that nanocrystalline Ti films have a great helium storage capacity. The 20 angle of the Bragg peak of （002） crystal planes of the He-charged Ti film shifts to a lower angle and that of （100） crystal plane is unchanged as compared with that of the pure Ti film, which indicates that the lattice parameter c increases and a keeps at the primitive value. The grain refining and helium damage result in the diffraction peak broadening.     

Study on structure change of carbon nanotubes depending on different reaction gases

Aligned carbon nanotubes were grown by plasma-enhanced hot filament chemical vapor deposition using different reaction gases and they were investigated by scanning electron microscopy and transmission electron microscopy. It is found that the hollow carbon nanotubes were formed using methane and hydrogen as the reaction gases, but the bamboo-structured carbon nanotubes were grown when ammonia was added into the reaction gases, indicating that the structure of the aligned carbon nanotubes was changed depending on different reaction gases. On setting of diffusion of carbon, the effects of the nitrogenous gas on the structure change of carbon nanotubes are studied.     

Patterned uniformly orientated silicon nanocrystallite films and efficient field emission characteristics

Patterned uniformly (100)-orientated silicon nanocrystallite (SiNC) films were fabricated based on hydrogen ion implantation technique and typical electrochemical anodic etching method. The surface morphology and microstructure characteristics of the films were characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and atomic force microscopy. The efficient field emission with low turn-on field of about 3.2 V/μm at current density of 0.1 μA/cm² was obtained. The emission current density from the SiNC films reached 1 mA/cm² under a bias field of about 11 V/μm. The experimental results demonstrate that the SiNC films have great potential applications for flat panel displays.     

Comparison of the elastic and inelastic scatterings between152Sm+12C and148 Nd+16O

Angular distributions of elastic and inelastic scattering have been measured for¹⁵²Sm+¹²C at 63.2 MeV and¹⁴⁸Nd+¹⁶O at 90.9 MeV. An evident interference pattern in the inelastic scattering has been observed for the first time in a strong Coulomb coupling system.We are indebted to Dr. S. Pieper for supplying the Ptolemy Program. One of us (Chenglie Jiang) would like to acknowledge the Argonne National Laboratory for the opportunity given, to perform theoretical calculations with the code Ptolemy during his visit there. Thanks are also due to Mr. H. Folger (GSI, Germany) for supplying the targets. This work was supported in part by China National Nature Science Fundation.     

On the interpretation of fluorescence anisotropy decays from probe molecules in lipid vesicle systems

Measurements of fluorescence depolarization decays are widely used to obtain information about the molecular order and rotational dynamics of fluorescent probe molecules in membrane systems. This information is obtained by least-squares fits of the experimental data to the predictions of physical models for motion. Here we present a critical review of the ways and means of the data analysis and address the question how and why totally different models such as Brownian rotational diffusion and wobble-in-cone provide such convincing fits to the fluorescence anistropy decay curves. We show that while these models are useful for investigating the general trends in the behavior of the probe molecules, they fail to describe the underlying motional processes. We propose to remedy this situation with a model in which the probe molecules undergo fast, though restricted local motions within a slowly rotating cage in the lipid bilayer structure. The cage may be envisaged as a free volume cavity between the lipid molecules, so that its position and orientation change with the internal conformational motions of the lipid chains. This approach may be considered to be a synthesis of the wobble-in-cone and Brownian rotational diffusion models. Importantly, this compound motion model appears to provide a consistent picture of fluorescent probe behavior in both oriented lipid bilayers and lipid vesicle systems.     

An exclusive event generator for e~+ e~- scan experiments

An exclusive event generator is designed for e+e-scan experiments,including initial state radiation effects up to the second order correction.The generator is coded within the framework of BesEvtGen.There are seventy hadronic decay modes available,with effective center-of-mass energy coverage from the two pion mass threshold up to about 6 GeV.The accuracy achieved for the initial state radiation correction reaches the level achieved by the KKMC generator.The uncertainty associated with the calculation of the correction factor to the initial state radiation is dominated by the measurements of the energy-dependent Born cross section.     

Study of pure and semileptonic decays of Ds meson within R-parity violating supersymmetric model

We present the comaprative study of semileptonic and leptonic decays of Ds, D±and D0meson（D →M l＋-αl-β, D → l＋αlβ, D → l＋αvα;α,β=e,μ） within the framework of R-parity violating the（ Rp） Minimal Supersymmetric Standard Model（MSSM）. The comparison shows that combination and product couplings,（λβiα λ＊ ij qor λβqkλ＊αj k）contribution to the branching fractions of the said processes（under consideration） is consistent with or comparable to the experimental measurements in most of the cases. However, some cases exist where these contributions are highly suppressed. We identify such cases in our analysis and single out the important ones suitable for exploring in the future and current experiments.     

Steady drainage in emulsions: corrections for surface Plateau borders and a model for high aqueous volume fraction

We compare extensive experimental results for the gravity-driven steady drainage of oil-in-water emulsions with two theoretical predictions, both based on the assumption of Poiseuille flow. The first is from standard foam drainage theory, applicable at low aqueous volume fractions, for which a correction is derived to account for the effects of the confinement of the emulsion. The second arises from considering the permeability of a model porous medium consisting of solid sphere packings, applicable at higher aqueous volume fractions. We find quantitative agreement between experiment and the foam drainage theory at low aqueous volume fractions. At higher aqueous volume fractions, the reduced flow rate calculated from the permeability theory approaches the master curve of the experimental data. Our experimental data demonstrates the analogy between the problem of electrical flow and liquid flow through foams and emulsions.     

Study of semileptonic decay of ${\bar{B}}_{s}^{0} \rightarrow \phi {l}^{+}{l}^{-}$ in QCD sum rule

In this work we study the semileptonic decay of ${\bar{B}}_{s}^{0}\to \phi {l}^{+}{l}^{-}$ (l=e, μ, τ) with the QCD sum rule method. We calculate the ${\bar{B}}_{s}^{0}\to \phi $ translation form factors relevant to this semileptonic decay, then the branching ratios of ${\bar{B}}_{s}^{0}\to \phi {l}^{+}{l}^{-}$ (l=e, μ, τ) decays are calculated with the form factors obtained here. Our result for the branching ratio of ${\bar{B}}_{s}^{0}\to \phi {\mu }^{+}{\mu }^{-}$ agree very well with the recent experimental data. For the unmeasured decay modes such as ${\bar{B}}_{s}^{0}\to \phi {e}^{+}{e}^{-}$ and ${\bar{B}}_{s}^{0}\to \phi {\tau }^{+}{\tau }^{-}$, we give theoretical predictions.     

Energy transfer in hyperthermal Xe-graphite surface scattering

The scattering of a hyperthermal Xe from a graphite (0001) surface has been studied using a molecular beam-surface scattering technique and molecular dynamics (MD) simulations. The angular and velocity distributions of scattered Xe atoms were measured at incidence energies from 0.45 to 3.5 eV, three incidence angles of 15°, 35° and 60° and the surface temperatures of 300 K and 550 K. The observed time-of-flight spectra exhibit a sharp velocity distribution with only one velocity component, which is ascribed to the direct inelastic scattering process. The angle-resolved energy ratios of the mean final translational energy over the mean incidence energy E_f/E_i agree well with those predicted based on the assumption of the conservation of the momentum parallel to the surface. The Hard-Cube model, where the mass of the cube is approximately 310 u, has reproduced the angle-resolved flux distributions of scattered Xe atoms. In the Hard-Cube model almost 80% of the normal component of the incidence translational energy is found to be lost in collision. The MD simulations reproduce well the experimental results by using the Brenner potential for intralayer C atoms and a Lennard-Jones potential for interlayer C–C pair interactions.