制备具有光催化活性的金红石相纳米氧化钛粉体

以TiCl4为原料，通过控制盐浓度和水解温度可以在温和条件下制备出晶粒尺 寸为6nm的金红石相氧化钛粉体，比表面积为175m^2/g。测定了粉体的X衍射、红外 和拉曼光谱。TEM照片显示粉体呈放射状颗粒，其粒径尺寸在200－400nm。苯酚的 光催化降解实验表明它比具有相同比表面积的锐钛矿粉体有更高的光催化活性。其 较大的团聚颗粒尺寸有利于光催化反应后的分离。     

Kinetic study of the crystallization processes of some decorative ceramic glazes

A kinetic study of the crystallization processes was performed for some decorative ceramic glazes in the PbO-SiO₂-Na₂O-K₂O-CaO(BaO)-Al₂O₃-B₂O₃ system with addition of 10% TiO₂ and ZnO. The crystallization kinetics has been studied in non-isothermal conditions using DTA technique. The apparent activation energies of the crystallization processes were calculated using the Kissinger method. The main crystalline phase, which provides the decorative effect, is rutile. This has been identified by X-ray diffraction and it is clearly visible in the optical microscopy images taken in transmitted light, as needle-like or even prismatic crystals arranged in radial-fibrous aggregates.     

Lyotropic effect in surface charge,electrokinetics, and coagulation of a rutile dispersion

Potentiometric, electrokinetic, and coagulation experiments with a rutile dispersion in the pH region above the point of zero charge exhibit an inverse lyotropic sequence for counterions: Li⁺>K⁺>Cs⁺. The potentiometric and electrokinetic data were interpreted by a surface complexation model assuming the Stern-Gouy-Chapman structure of the interfacial layer, which yielded the values of inner layer capacitances,C, and the intrinsic equilibrium constants,K _ass ⁰ , characterizing the specificity of each counterion. These parameters were used to explain the order of lyotropic sequences in the adsorption, coagulation, and electrokinetic phenomena.     

Sulfate Ions in Titania Polymorphs

Sol-gel titania was sulfated by using sulfuric acid as hydrolysis catalyst, or by impregnating with ammonium sulfate fresh samples prepared with nitric acid or ammonium hydroxide as hydrolysis catalyst. Samples were characterized with X-ray powder diffraction, infrared spectroscopy, thermogravimetry and atomic absorption spectroscopy. Sulfate ions were found anchored to brookite and anatase phases, because they have short O—O atomic bond lengths slightly larger than the largest O—O bond length of sulfate ion. Since the shortest O—O atomic bond in anatase is smaller than the one in brookite, the sulfate ions are then less deformed when they are anchored to anatase, and consequently more stable. Therefore when the sample temperature is raised, the brookite with sulfate ions was transformed mainly to anatase and not into rutile, which is the most probably transformation when these ions are not involved. Sulfate ions also hindered anatase and brookite crystallite growing and stabilized the crystalline structure of anatase. When the sulfate ions are lost the crystalline anatase phase is transformed into rutile, leaving a large number of vacancies that favored atom diffusion and consequently the growing of rutile crystallites. The crystalline evolution of the samples as a function of the annealing temperature is almost independent of the sulfating method.     

Synthesis of Spherical Titanium Dioxide Particles by Homogeneous Precipitation in Acetone Solution

Titania powders were synthesized by thermal hydrolysis of titanium tetrachloride in a mixed solvent was studied. The dielectric constant was tuned by regulating the acetone/water volume ratio (R/H ratio) and temperature of the solvent. Hydroxypropyl cellulose (HPC) was used as a steric dispersant. The synthesis were carried out at R/H ratios of 0–4, temperatures of 70–90°C, TiCl₄ concentrations of 0.05–0.2 M, HPC concentrations of 0–5 × 10^–3 g/cm³, and synthesis times of 15–60 min. The TiO₂ particles obtained at an R/H ratio of 0, i.e., pure water system, were fine and agglomerated. In contrast, the TiO₂ particles prepared at an R/H ratio of 3 were uniform and spherical. The TiO₂ particle size increased with increasing TiCl₄ concentration. The synthesis temperature did not influence the particle size, but greatly influenced the morphologyof the TiO₂. Adding HPC to the solution yielded more uniform and spherical particles. In addition, the synthesis time should be longer than 30 min to obtain the most uniform and spherical particles. The dielectric constant of the acetone-water mixed solvent at 28 gave the most uniform and spherical TiO₂ particles. The powders prepared at the condition of 0.1 M TiCl₄, R/H ratio of 3, HPC concentration of 0.001 g/cm³, temperature of 70°C, and synthesis time of 1 h exhibited the most uniform and spherical morphology. The as-synthesized powder was anatase and retained the phase below 400°C. It transformed to the rutile phase after calcination at 700°C.     

Does a Photocatalytic Synergy in an Anatase–Rutile TiO2 Composite Thin‐Film Exist?

It has often been suggested that anatase–rutile mixtures/composites synergistically enhance photocatalysis. However, in the case of dense thin‐films containing an intimate mix of both anatase and rutile phases, such an effect has not been observed. In synthesising combinatorial films with graded film thickness and phase, and applying established photocatalytic mapping methods, we were able to assess how dense thin‐films of intimately mixed anatase–rutile mixtures affect photocatalytic performance. We found that no photocatalytic synergy between anatase–rutile composites (29≤rutile %≤83) within such dense thin‐film systems exists. In fact, an increased presence of rutile caused the photocatalytic activity to fall. This was explained by the unfavourable energetics in the multiple electron transfers required between several neighbouring rutile and anatase sites for the photo‐generated electron to reach the material’s surface; encouraging the trapping of electrons within the bulk and increasing the likelihood of charge recombination. The decrease in photocatalytic activity was found to vary linearly with rutile component.     

金红石TiO_2中本征缺陷扩散性质的第一性原理计算

基于密度泛函理论的爬坡弹性带方法,对金红石相二氧化钛晶体中钛间隙、钛空位、氧间隙、氧空位4种本征缺陷的扩散特征进行了研究.对比4种本征缺陷在晶格内部沿不同扩散路径的过渡态势垒后发现,缺陷扩散过程呈现出明显的各向异性.其中,钛间隙和氧间隙沿[001]方向具有最小的扩散势垒路径,激活能分别为0.505 eV和0.859 eV;氧空位和钛空位的势垒最小的扩散路径分别沿[110]方向和[111]方向,激活能分别为0.735 eV和2.375 eV.     

Crystal Phases of TiO2 Ultrafine Particles Prepared by Laser Ablation of Solid Rods

Titanium dioxide ultrafine particles (UFPs) are produced by pulsed laser ablation of titanium or titanium dioxide (anatase and rutile) rods in an atmosphere of He or O₂/He mixture. The collected UFPs on cellulose membrane filters at the exit of the ablation chamber are analyzed by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The TiO₂ particles produced are composed of very small particles (diameter: 10–50nm) that are completely anatase, irrespective of the rod material, and relatively large particles (diameter: 100nm–1m) that are a mixture of anatase and rutile. The large particles consist of the direct strip-off fragments coming from the rod surface. The particles obtained from the laser ablation on TiO₂ rods in an atmosphere of He contains gray particles that are supposed to be amorphous TiO₂ (x < 2). In the presence of O₂ in the ablation chamber, these oxygen defects in amorphous TiO₂ are stabilized and anatase UFPs are formed. These results suggest that the crystal phase of the products can be controlled by adjusting the rod material and the gases used in the ablation process.     

Quantum-chemical study of the interface formed by carboxylic species on TiO<Subscript>2</Subscript> nanoparticles. 1. Nanoparticle surface

The current paper presents results of a quantum-chemical study of the surface structure of nanoparticles of both rutile and anatase crystallographic modifications. Different stages of the surface relaxation are discussed. Water adsorption is considered. The calculations were performed in the spd-basis by using semi-empirical quantum-chemical codes, both sequential and parallel. The results are mainly addressed to the study of the interface formed by titania nanoparticles and a set of carboxylated species, namely, benzoic, bi-isonicotinic acids as well as tris-(2,2′-dcbipyridine) Fe(II) complex placed on the surface of either rutile or anatase polymorphs.This revised version was published online in August 2005 with a corrected issue number.     

Self-assembly of rutile (α-TiO<Subscript>2</Subscript>) nanoclusters into nanorods in microemulsions at low temperature and their photocatalytic performance

A novel method – inverse microemulsion has been developed not only for synthesizing low cost TiO₂ nanocrystals but also for the first time making these nanocrystals self-assemble into various nanoparticles at 85°C. By variation of the volume ratios of oil to water in reverse microemulsions, the morphologies of obtained samples turned from nanoclusters to nanospherules, then grew into nanodumbbells, and became nanorods at last. It could be observed by transmission electron microscope (TEM) directly. The resulting materials were characterized by X-ray diffraction (XRD), field emission scanning electron microscope (FESEM) and high-resolution transmission electron microscope (HRTEM). The photocatalytic activity of TiO₂ was tested with photodegradation of Methyl Orange (MO) in water. The catalyst consisting of nanorods showed the highest photocatalytic activity, which is due to its large surface area. Furthermore, the mechanism of self-assembly of TiO₂ nanocrystals was discussed in detail.