Permeability,permselectivity, and penetrant‐induced plasticization in fluorinated polyimides studied by positron lifetime measurements

The ortho‐positronium (o‐Ps) lifetime τ₃ and its intensity I₃ in various fluorinated polyimides were determined by the positron annihilation technique and were studied with the spin–lattice relaxation time T₁ and the propylene permeability, solubility, diffusivity, and permselectivity for propylene/propane in them. τ₃, I₃, and the distribution of τ₃ changed when the bulky moieties in the polyimides were changed. The polyimides, having both large τ₃ and I₃ values, exhibited a short T₁ and a high permeability with a low permselectivity. The propylene permeability and diffusivity were exponentially correlated with the product of I₃ and the average free‐volume hole size estimated from τ₃. In highly plasticized states induced by the sorption of propylene, the permeability increased with the propylene pressure in excellent agreement with the change in the free‐volume hole properties probed by o‐Ps. The large and broad distribution of the free‐volume holes and increased local chain mobility for the 2,2‐bis(3,4‐decarboxyphenyl) hexafluoropropane dianhydride‐based polyimides are thought to be important physical properties for promoting penetrant‐induced plasticization. These results suggest that o‐Ps is a powerful probe of not only the free‐volume holes but also the corresponding permeation mechanism and penetrant‐induced plasticization phenomenon. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 308–318, 2003     

Positron annihilation studies of poly(N‐isopropyl acrylamide) gel in mixed solvents

Positron annihilation lifetime spectroscopy was used to characterize the reentrant volume‐phase‐transition behavior of poly(N‐isopropyl acrylamide) hydrogel in an ethanol/water mixed solvent. The polymer gel was synthesized with γ irradiation. The ortho‐positronium lifetime (τ₃) in the gel slowly increased with an increase in the ethanol content in the mixed solvent. τ₃ was not influenced by the volume phase transition. The ortho‐positronium intensity decreased with the collapse of the gel in an approximately 10% ethanol/water mixture. When swelled in pure ethanol, τ₃ initially increased with the solvent amount in the gel, showing the destruction of intramolecular hydrogen bonding and the relaxation of polymer chains. The lower critical solution temperature of the gel in the 10% ethanol/water mixture was lower than that in pure water, and τ₃ for various solvent contents showed behavior similar to that seen in pure solvent. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1028–1036, 2002     

Positron spectroscopy analysis in metallocene propylene/1‐octadecene copolymers: Parameters dependence on monoclinic and mesomorphic polymorphs

Copolymers of propylene and 1‐octadecene synthesized by a metallocene catalyst were characterized by PALS, WAXD, DSC, and density measurements. The change in the sizes and the number density of free‐volume holes as a function of the 1‐octadecene content were compared to the master laws published for copolymers of propylene with α‐olefins of shorter lengths. It was found that the samples were separated into two groups. The first set of samples obeyed the master laws while the second group deviated. This behavior was explained by the difference in the copolymer structure. The WAXD analysis confirmed the separation as well. The deviation was explained as due to the mesomorphic crystalline structure of the second group of samples, in contrast to the monoclinic one for the first group, which was a result of the relatively fast cooling from the molten state and from the high comonomer molar content. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1994–2002, 2010     

Inelastic cross sections for pentane isomers by positron impact

ABSTRACT

This work aims at the calculation of various inelastic cross sections for three pentane isomers, namely normal pentane, isopentane and neopentane. The direct ionisation, positronium formation, total ionisation and total inelastic cross section are reported for these targets using modified spherical complex optical potential (mSCOP) and complex scattering potential-ionisation contribution (CSP-ic) method. The cross sections are computed for a wide energy range from their respective thresholds to 5?keV. We have also attempted to probe the isomeric effect in the inelastic scattering of positrons from the pentane isomers. The cross sections for the three isomers were found to overlap for the entire comparative energy range except at the peak region. Hence, in general no appreciable isomeric effect was beheld for the pentane isomers.     

基于正电子的反物质研究进展

正电子是最容易获得的反粒子,因而电子-正电子系统最适合研究普通物质与反物质的结合。本文结合最近实验上首次合成物质-反物质分子这个重大发现,介绍反物质(正电子)研究历史、现状及展望;重点讨论基于正电子的捕获、约束、积累等实验技术,以及物质-反物质分子——正电子素分子的合成方法。     

Comment on “New methods for old Coulomb few‐body problems”

In this Comment on the above‐mentioned paper by F. E. Harris, A. M. Frolov, and V. H. Smith, we briefly review our contributions to development of new methods for solution of the Coulomb four‐body problem. We show that our research group, headed by Professor T. K. Rebane, had a priority in using the fully correlated exponential basis for variational calculations of four‐body systems. We also draw attention to the fact that our group subsequently implemented a more advanced method, which uses highly efficient exponential‐trigonometric basis functions for solution of the same problem. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2006     

Direct measurement of free-volume hole distributions in polymers by using a positronium probe

We have directly measured the free-volume hole distributions in semicrystalline polypropylene by positron lifetime annihilation spectroscopy. A Laplace inversion technique was engaged to analyze the positron lifetime spectra measured under quasi-isotropic external pressures of 0, 4.2, and 14.7 kbar into continuous lifetime distributions. The hole radii distributions as determined from the ortho-positronium lifetime distributions are found to be between 4.0 and 0.5 Å and to have maxima at 3.0, 1.9, and 1.1 Å under the external pressures of 0, 4.2, and 14.7 kbar, respectively. © 1992 John Wiley & Sons, Inc.     

Physical design of positronium time of flight spectroscopy apparatus

Positronium time of flight spectroscopy（Ps-TOF）is an effective technique for porous material research.It has advantages over other techniques for analyzing the porosity and pore tortuosity of materials.This paper describes a design for Ps-TOF apparatus based on the Beijing intense slow positron beam,supplying a new material characterization technique.In order to improve the time resolution and increase the count rate of the apparatus,the detector system is optimized.For 3 eV o-Ps,the time broadening is 7.66 ns and the count rate is 3 cps after correction.     

Positronium Decay in a Circular Polarized Laser Field

We calculate the lifetime of both the o-Ps and the p-Ps positronium annihilation decay Ps →γγ in the strong circular polarized laser field. We take a strategy of the faztorization to separate the effects caused by the Coulomb interaction and the strong laser 6eld interaction. It is factorized in the time direction but not in the space direction. Our results show that in the laser with long wavelength and high intensity, the lifetimes of those Ps states are dramatically increased. For C02 laser with 10 μm wavelength and 1013 W/cm2 intensity, lifetime of the spin-single positronium is increased by 108 times. Our result is consistent with those obtained by solving the SchSdinger equation. This effect may be useful for the high harmonic generation （HHG） effects provided with the Ps [Phys. Rev. Lett. 70 （1993） 774; Phys. Rev. Lett. 93 （2004） 013601].     

Positron annihilation properties of copolyimides and copolyamides with microphase‐separated structures

The positron annihilation lifetime (PAL) of a series of copolyimides and copolyamides with microphase‐separated structures was measured to investigate the effects of different hard‐segment polymers on the PAL properties of soft‐segment domains of poly(dimethyl‐siloxane) (PDMS) and poly(ethylene oxide) (PEO). The lifetime (τ₃) and intensity (I₃) of the long‐lived component are given as a function of the PDMS or PEO content for a series of copolymers, of which the density roughly obeys the additive rule except for the PDMS‐segmented copolyamides. The PDMS‐segmented copolyimides and copolyamides show much smaller I₃ values than those estimated from the additive rule. The lifetime distribution of the long‐lived component for the PDMS‐segmented copolyamides is composed of two components. The longer‐lifetime component is attributed to pure PDMS domains, and the shorter‐lifetime component is attributed to the polyamide domains, intermediate phases, and PDMS domains containing small amounts of short amide blocks. Despite the high PDMS content, the latter component is rather large. Thus, the positronium formation in the PDMS domains of the copolyimides and copolyamides is effectively reduced. This can be explained by the combination of the difference in the electron affinity of the PDMS and polyimide or polyamide segments and the incomplete phase separation. The PEO‐segmented copolyimides show much smaller I₃ values than those predicted from the additive rule. This is likely attributable to the effects of the intermediate phases. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1123–1132, 2000