Reduction of Entrained Hydroxy Species in Ormosil Films for Integrated Optics

Organically modified silicates (ormosils) have been viewed as possible materials for optical signal processing devices for communications networks. One significant problem obstructing their use in this application is the absorption of infrared light by hydroxy species (present for example in silanol groups (SiOH) and water) around the communications wavelengths (1310 and 1550 nm). We have investigated several ormosil compositions, synthesised via an aqueous sol-gel method, to determine if residual hydroxy groups can be removed more effectively via reducing the connectivity of the material by increasing the number of organic groups (such as Si—CH₃). Furthermore, we have investigated the effect of different inert atmospheres on the drying process. It was found that reducing the connectivity does promote the removal of hydroxy absorption, mainly via the condensation of residual silanol groups, but also by removal of residual water, depending on the other precursors in the system. It was also found that the drying atmosphere used (nitrogen or helium) had no effect on the drying process.     

Finite element modal solutions of planar photonic crystal fibers with rectangular air-holes

Modal solutions of planar photonic crystal waveguides with rectangular air-holes are presented by using a rigorous full-vectorial finite element-based approach. The effective indices, mode field profiles, spot-sizes, power confinements, modal hybridness, beat lengths and group velocity dispersions are shown for the fundamental and higher order modes of the quasi-TE and TM polarizations.     

Loss in a rectangular optical waveguide induced by the crossover of a second waveguide

We calculate the loss induced in a single-mode rectangular optical waveguide by the presence of a second waveguide, perpendicular to the first, which crosses over the first waveguide at a variable distance d. Our calculation is applied to the analysis of several doped silica waveguides of practical importance for optical circuit design.     

Performance and simulation of an on-board guided-wave optical processor for airborne SAR applications

This paper describes the performance and simulation of a compact integrated optical processor for the real-time reconstruction of two-dimensional images in airborne stripmap synthetic aperture radar applications. The functional behavior of the processor is explained in some detail. The design criteria are briefly given. The simulation step allowed the main processor characteristics and properties to be identified. A number of comparisons were obtained in airborne SAR mission scenarios between the predictions of the optical device and those achieved by the modern electronic digital approach, based on the wavefront reconstruction method by matched filtering.     

Analysis of Radiation Phenomena in a Wedge Ended Dielectric Slab Waveguide

Radiation phenomena observed in a wedge shape ended dielectric slab waveguide are analyzed using mode matching technique. The case of transverse electric polarization (TE) being parallel to dielectric slab waveguide is assumed. In order to describe the fields in the wedge region, a stack of dielectric plates is assumed and in each layer the fields are expanded in terms of the mixed spectrum of guided and radiated modes. A similar expansion is used in the constant thickness slab waveguide while in free space medium a continuous-radiation mode expansion is used. Then a mode matching approach is applied, incorporating the orthogonality properties of mixed spectrum modes, in order to compute the wave fields inside the dielectric slab waveguide and wedge medium. Mode matching is achieved by discretizing the continuous radiation mode spectrum leading into a numerically stable solution provided a sufficient large number of points are used to convert integrals into finite summations. Numerical computations are carried out for various wedge geometries and shapes including linear and exponential profiles.     

LIGHTWAVE PROPAGATION IN SUBWAVELENGTH HOLES

In this paper we evaluate methods for calculating dispersion relations for waves with wavelengths of the order of hundreds of nanometres propagating in square waveguides with imperfectly conducting walls. The methods considered here are based on those used previously for rectangular dielectric waveguides.     

New generalized computations of quasi-planar waveguides characteristics

An efficient hybrid field solution to the general multilayer substrates transmission line problems with full shielded and half open cross-sectional geometry is presented by using the waveguide modes coupling and decoupling procedure in the spectral domain. Modal transverse transmission lines corresponding to the LSE and LSM modes are taken into account so that the Green's elements for the edge conditions can be derived by a simple iterative method. In this paper, we analyze not only the propagation constants and characteristic impedances but also the available transmission power capacity and power distribution of most commonly used structures. Normalized eigenmode power levels characterizing the propagation features are computed.     

Fluorinated poly(arylene ether ketone)s bearing pentafluorostyrene moieties prepared by a modified polycondensation

The polycondensation of decafluorobenzophenone with hexafluorobisphenol A was modified by the addition of a molecular sieve dehydrating apparatus to the refluxing reaction system. This modification promoted the polymerization and enabled the reactions to be conducted in milder conditions and completed in a shorter time, thereby depressing side reactions such as branching and crosslinking. The resulting fluorinated poly(arylene ether ketone)s (FPAEK) were free of gel particles and possessed the designed molecular weights. This modified procedure was also suitable for introducing crosslinkable pentafluorostyrene (FSt) moieties into the polymers at the chain ends and/or inside the chain with the vinyl group of FSt being pendant. The resulting FSt containing fluorinated poly(arylene ether ketone)s (FPAEK‐FSt) can then be thermally crosslinked at 100 °C in the presence of 1% benzoyl peroxide (BPO) or at 250 °C without any initiator. The glass‐transition temperatures (T_g's) of FPAEK increased with increasing molecular weight and leveled off at about 147 °C for the polymer with a number‐average molecular weight of 18,600 Da, whereas the values were not apparently affected by the addition of FSt units. However, crosslinking of the FPAEK‐FSt resulted in an approximate 30 °C increase of the T_g. Spin‐coating FPAEK‐FSt onto silicon wafers followed by crosslinking gave films with excellent thermal stability, physical strength, and adhesion to the substrate as well as good reproducibility in terms of film preparation and optical properties. The refractive index and birefringence of the films measured at a wavelength of 1.55 μm were 1.502 and 2.5 × 10^?3, respectively. © 2002 Government of Canada. Exclusive worldwide publication rights in the article have been transferred to Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4205–4216, 2002     

Structural and Optical Properties of Sol-Gel Derived Aluminosilicate Planar Waveguides Doped with Er3+ Ions

Er3+ doped-aluminosilicate thin films were prepared on silica and silica/Si substrates by the sol-gel process and dip-coating. The sol-gel aluminosilicate planar waveguides were prepared from silicon and aluminium alkoxides. Their structural characterization has been carried out by Raman spectroscopy, Atomic Force and Scanning Electron Microscopies. The results indicated that these films present an amorphous structure until an annealing temperature of 900°C, while at temperatures higher than 1000°C, crystallization occurs. An estimate of microcrystallite sizes using Raman spectroscopy is given, which agrees with data from scanning electron microscopy. The optical properties have been investigated by Fluorescence spectroscopy in the visible region.