基于MCM-41分子筛表面的镱离子印迹聚合物的制备及其性能

运用离子印迹技术,以3-氯丙基三乙氧基硅烷为锚定剂,将功能单体直链聚乙烯亚胺(PEI)接枝在MCM-41分子筛表面,选择镱离子作为模板离子,以环氧氯丙烷交联制备出基于MCM-41表面的镱离子印迹聚合物Yb(Ⅲ)-IIP-PEI/MCM-41,并以同样的方法制备非离子印迹聚合物(NIP-PEI/MCM-41)。 利用傅里叶变换红外光谱仪和扫描电子显微镜等技术手段对Yb³⁺印迹聚合物进行表征,采用静态吸附法确定了Yb(Ⅲ)-IIP-PEI/MCM-41对Yb³⁺的最佳吸附条件及选择性吸附性能。 结果表明,Yb(Ⅲ)-IIP-PEI/MCM-41和NIP-PEI/MCM-41的最大吸附量分别为229.93和99.27 mg/g;印迹材料对Yb³⁺的吸附符合Langmuir模型;吸附平衡在40 min的时候基本可以达到,可以利用准二级动力学模型来描述其吸附过程;Yb(Ⅲ)-IIP-PEI/MCM-41对Yb³⁺具有较强的选择性,同时也具有很好的重复使用性能。 成功地将MCM-41和离子印迹聚合物的优点结合起来,制备出一种对稀土Yb离子既有高吸附量又有高选择性的吸附材料,为进一步将其应用在处理实际废水,分离回收低浓度稀土废水中的稀土元素等方面打下了基础。     

Micelle formation of ethoxylated nonyl-phenols in aqueous solutions

The micelle formation of nonyl-phenols with various numbers of ethoxy groups (n _EO=10–40) was investigated in aqueous solutions and the study was focussed on the effect of temperature (293–323 K), the chain length and the inorganic electrolyte (NaCl) on the critical micelle concentration (c.m.c).The c.m.c. was determined by surface tension and interfacial tension measurements in a water/n-octane system. On the basis of the actual c.m.c. and its temperature dependence the thermodynamic functions of micelle formation (H° _m,S°_m,G°_m) were also calculated. The latter study comprised the determination of the thermodynamic function for unity ethoxy groups ((Y° _m)) as a function ofn _EO.According to the experimental results the micellar solutions are the more stable, the smaller the number of ethoxy groups in the tenside molecule and the higher the temperature as well as the electrolyte content of the system.     

Mixed micelles of cetyltrimethylammonium bromide and poly(ethylene glycol)-600 monolaurate as catalysts of polyethylenimine phosphorylation in chloroform

Micelle formation in a cetyltrimethylammonium bromide-poly(ethylene glycol)-600 monolaurate-chloroform system in the absence and presence of hydroxybenzylated polyethylenimines (PEI) was studied by dielcometric titration, NMR self-diffusion, light scattering, and kinetic methods. A catalytic effect of mixed micelles on the reaction of 4-nitrophenylbis(chloromethyl)phosphinate with PEI was shown. The catalytic effect depends on the degree of substitution of PEI and composition of a surfactant mixture. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1359–1365, August, 2006.     

Simultaneous Removal of Polymers with Different Ionic Character from Their Mixed Solutions Using Herb-Based Biochars and Activated Carbons

Nettle and the sage herbs were used to obtain carbonaceous adsorbents. For the biochar preparation the precursors were dried and subjected to conventional pyrolysis. Activated carbons were obtained during precursor impregnation with phosphoric(V) acid and multistep pyrolysis. The textural parameters and acidic-basic properties of the obtained adsorbents were studied. The activated carbons prepared from the above herbs were characterized by the largely developed specific surface area. The obtained carbonaceous adsorbents were used for polymer removal from aqueous solution. Poly(acrylic acid) (PAA) and polyethylenimine (PEI) were chosen, due to their frequent presence in wastewater resulting from their extensive usage in many industrial fields. The influence of polymers on the electrokinetic properties of activated carbon were considered. PAA adsorption caused a decrease in the zeta potential and the surface charge density, whereas PEI increased these values. The activated carbons and biochars were used as polymer adsorbents from their single and binary solutions. Both polymers showed the greatest adsorption at pH 3. Poly (acrylic acid) had no significant effect on the polyethylenimine adsorbed amount, whereas PEI presence decreased the amount of PAA adsorption. Both polymers could be successfully desorbed from the activated carbons and biochar surfaces. The presented studies are innovatory and greatly required for the development of new environment protection procedures.     

水性乳液/聚氨酯模型缔合增稠剂的触变性机理

以异佛尔酮二异氰酸酯(IPDI)与聚乙二醇(PEG,分子量为4000,6000和8000)为原料,以直链醇(C12,C14,C16和C18)为封端剂,合成了疏水改性乙氧基化氨基甲酸酯(HEUR),并将其应用于乳液增稠.采用核磁共振波谱(¹H NMR)、傅里叶变换红外光谱(FTIR)及凝胶渗透色谱(GPC)表征了HEUR的结构、分子量及其分布,研究了其在水性乳液中的流变行为.研究结果表明,当HEUR封端基团为C14,C16和C18,且质量分数增加到1. 0%以上时,增稠的乳液(Latex/HEUR)的流变曲线出现触变环,为触变性流体.当HEUR亲疏水比值(R_h)减小时,疏水性增强,触变环向低剪切速率(γ˙)方向移动,黏度下降率(Δη)增大;当HEUR用量增加时,触变环面积(S_loop)也增大.这些触变性特点归因于HEUR在乳液中的缔合作用、氢键作用及链缠结.利用扫描电子显微镜(SEM)和原子力显微镜(AFM)对Latex/HEUR的聚集态和表面形貌进行了表征.结果表明,随着HEUR封端基团链长增加,Latex/HEUR颗粒...     

The Surface and Thermodynamic Properties of Ethoxylated Sodium Monoalkyl Sulfosuccinate Surfactants

A series of ethoxylated sodium monooctyl sulfosuccinates [E(n)SMOSS] and ethoxylated sodium monolauryl sulfosuccinates [E(n)SMLSS] have different units of ethylene oxide (n = 9, 14, 23) were synthesized. The surface and thermodynamic properties of these surfactants have been compared with sodium dioctyl sulfosuccinate surfactant (SDOSS) as a commonly used surfactant. The surface tension measurements at 25, 35, 45, and 55°C were used to determine of the critical micelle concentration (CMC) and surface active properties of these surfactants. The effect of the ethylene oxide (EO) unit and the alkyl chain length on the surface properties for the prepared surfactants was studied. The results show that the ethoxylated sodium monoalkyl sulfosuccinates generally have lower values of CMC than that of sodium dioctyl sulfosuccinate. The values of surface active parameters indicate that the ethoxylated sodium monooctyl sulfosuccinates and ethoxylated sodium monolauryl sulfosuccinates surfactants have adsorption properties better than the sodium dioctyl sulfosuccinate surfactant as a resulted presence of ethylene oxide in molecules of the prepared surfactants. The thermodynamic parameters show that the (EO) unites in the chemical structure of ethoxylated sodium monoalkyl sulfosuccinate surfactants improve their micellization and adsorption properties.     

Antimicrobial silica particles loaded with quaternary ammonium polyethyleneimine network

Silica particles functionalized with quaternary ammonium groups were prepared by interpenetrating polyethylenimine (PEI) into silica particles and crosslinking with diiodopentane, followed by octyliodide alkylation and methyliodide quaternarization (S‐QA‐PEI). The synthesized S‐QA‐PEI particles were identified with a slight particle size increase of 2–3 µm. Different ratios of PEI:silica particles were prepared and analyzed. While silica particles are negatively charged, ?16.7 ± 5.11 mV, the prepared S‐QA‐PEI particles are positively charged, +50–60 mV. These particles were embedded in poly(ethylene vinyl acetate) and poly(ethylene methacrylic acid) coatings which exhibited strong antibacterial activity. Copyright © 2014 John Wiley & Sons, Ltd.     

Hydrophobic polyphenylalanine-grafted hyperbranched polyethylenimine and its in vitro gene transfection

A series of amphiphilic multi‐armed PPn copolymers were prepared by ROP of Phe‐NCA with PEI‐25k as a macroinitiator. The particle size of the PPn/DNA complexes was about 100 nm and the zeta potentials were below 20 mV. An MTT assay demonstrated that all the PPn copolymers had lower cytotoxicity compared to PEI‐25k. In vitro gene transfection studies were also conducted in HeLa, 293 and CT 26 cells. The optimal quantity of hydrophobic phenylalanine segments in PP80 led to higher transfection efficiency in various cell lines based on this study. The results indicate that PP80 was the best candidate for gene delivery among these PPn copolymers.