Viscoelastic properties of ultrathin polycarbonate films by liquid dewetting

A liquid dewetting method for the determination of the viscoelastic properties of ultrathin polymer films has been extended to study thickness effects on the properties of ultrathin polycarbonate (PC) films. PC films with film thicknesses ranging from 4 to 299 nm were placed on glycerol at temperatures from below the macroscopic glass transition temperature (T_g) to above it with the dewetting responses being monitored. It is found that the isothermal creep results for films of the same thickness, but dewetted at different temperatures can be superposed into one master curve, which is consistent with the fact of PC being a thermorheologically simple material. Furthermore, the results show that the T_g of PC thin films is thickness dependent, but the dependence is weaker than the results for freely standing films and similar to literature data for PC films supported on rigid substrates. It was also found that the rubbery plateau region for the PC films stiffens dramatically, but still less than what has been observed for freely standing polycarbonate films. The rubbery stiffening is discussed in terms of a recently reported model that relates macroscopic segmental dynamics with the stiffening. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1559–1566     

Strain hardening of polycarbonate in the glassy state: Influence of temperature and molecular weight

This study is concerned with the temperature and molecular weight dependence of the strain-hardening behavior of polycarbonate. It is shown that the strain-hardening modulus reduces with increasing temperature and decreasing molecular weight. This result is interpreted in terms of temperature accelerated relaxation of the entanglement network. Moreover, it is shown that frozen-in orientations, induced by homogeneous deformations above the glass transition temperature, lead to anisotropic yield behavior that can be fully rationalized (and modelled) in terms of a superimposed stress contribution of the prestrained network. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2041–2049, 2004     

弹性体型聚氨酯和聚碳酸酯共混物的形态结构

用ＤＳＣ、ＷＡＸＤ和ＳＡＸＳ研究了溶液共混的弹性体型聚氨酯（ＰＵ）／聚碳酸酯（ＰＣ）共混物的结构。结果表明，ＰＵ／ＰＣ为部分相容体系；共混过程中，溶剂ＤＭＦ的诱导作用使ＰＣ形成结晶，其长周期与ＰＵ硬段形成微相的长周期相近     

Application of the essential work of fracture concept to nanostructured polymer materials

The first part of the paper deals with a critical discussion of the methodical basis of essential work of fracture (EWF) concept with respect to the specimen geometry (especially the notch depth) and application to polymers. In the second part, an in situ testing device, which combines a tensile testing machine with an optical strain-field measuring system, has successfully demonstrated possibility of characterization of fracture behaviour of polystyrene-polybutadiene block copolymers and block copolymer/homopolymer blends as examples of nanostructured polymer materials. It has been shown that knowledge of the time evolution of the strain field close to the crack tips leads to a simple verification of the basic precondition for the applicability of the EWF concept, the precondition “plastic zone coalescence-before-stable crack propagation”.     

Graft copolymer of polymethyl methacrylate-g-polycarbonate urethane and the fully gelled grafted networks

We have synthesized and characterized the graft copolymer of polymethyl methacrylate (PMMA)-graft-polycarbonate urethane (PCU) (designated PMMA-g-PCU) and the fully gelled mutually crosslinked network composed of both PMMA and PCU (designated as PMMA-PCU-N). Unlike the previously synthesized one phase PCU/PMMA simultaneous interpenetrating polymer networks (IPN's), both of these new materials exhibited two distinct T_g's (from DSC and DMA studies) at all compositions which we have studied. The two-phase nature of the graft and network polymer was confirmed by TEM with domain sizes smaller than those found in the blends of the linear PCU and PMMA chains. In comparison with the corresponding IPN's, the PMMA-g-PCU and the PMMA-PCU-N were thermally less stable and had a lower ultimate strength. © 1992 John Wiley & Sons, Inc.     

二氧化碳/环氧丙烷/γ-丁内酯三元共聚物微球降解性的研究

动物体内的体液和肠胃等器官的环境各不相同，这就要求各种不同用途的载药体的降解性能必须满足特定环境的要求。同时，可降解材料在不同的降解介质中通常有着不同的降解表现，这也决定着可降解材料的运用环境。因此，有必要对降解性材料在不同降解介质中的降解性进行专门的研究，由CO2和环氧化物合成的脂肪族聚碳酸酯具有良好的生物降解性能。     

Molecular dynamics in a miscible polyester blend

The dynamic mechanical and dielectric spectra of a miscible polyester and polycarbonate blend are investigated with emphasis on the latter technique. It was found that relaxation spectra for the blends from both techniques are broader than those of the constituent homopolymers. This is ascribed to greater intermolecular coupling and concentration fluctuations within the blends. The composition at which the greatest coupling occurs is dependent on the relaxation technique used and is skewed towards the component which shows the highest degree of intermolecular coupling. A number of parameters, such as relaxation time of the polymer molecules in the blend and relaxation strength, are compared as a function of reduced temperature (experimental temperature scaled by the glass transition temperature). Whereas blend behavior is generally intermediate between that of the homopolymers, it appears as though mobility of compositions with low polyester content have a greater relaxation time and possess a higher activation energy when compared to a simple, weighted average of the corresponding homopolymer values. © 1996 John Wiley & Sons, Inc.     

Anisotropy of hole structures in oriented polycarbonate probed by two-dimensional angular correlation of annihilation radiation

Two-dimensional angular correlation of annihilation radiation (2D-ACAR) experiments have been performed on an uniaxially oriented polymer, bisphenol-A polycarbonate. The two-dimensional hole structures of unoriented and oriented polymers, determined from the momentum distributions, are found to be spherical and ellipsoidal, respectively. The average hole radii are determined to be 2.9 Å in the unoriented sample and between 2.3 and 3.8 Å in the oriented sample. Applications of the 2D-ACAR method to image the three-dimensional hole structures of polymeric materials are discussed. © 1996 John Wiley & Sons, Inc.     

Synthesis of AB and ABA block copolymers as compatibilizers in nylon 6/polycarbonate blends

Nylon 6 (Ny6) and Bisphenol A polycarbonate (PC) are immiscible and form biphasic blends. To improve the compatibility of Ny6 and PC several ABA and AB Ny6/PC block copolymers were synthesized, and their compatibilizing behavior on the blends were tested. Block copolymers were prepared by reacting monoamino- or diamino-terminated Ny6 homopolymers with high molecular weight PC at 130°C in anhydrous DMSO. The reaction of diamino- and monoamino-terminated Ny6 with polycarbonate produces block copolymers of the type PC-Ny6-PC (ABA) and PC-Ny6 (AB), respectively, plus a certain amount of unconverted PC degradated to lower molecular weights. To separate the block copolymer from the unconverted PC, a selective fractionation with tetrahydrofuran (THF) and trifluoroethanol (TFE) was carried out. Three different fractions were obtained: THF-soluble fraction, TFE-soluble fraction, and the TFE-insoluble fraction. The scanning electron microscopy (SEM) analysis of a 75/25 (wt/wt) Ny6/PC blend added with 2% of ABA or AB block copolymers, showed the presence of smaller PC particles more adherent to the polyamide matrix, with respect to the same blend nonadded, which is clearly biphasic. The size of the PC particles decreases from ABA to AB compatibilized blends and the adhesion with the matrix is increases in the same way. © 1996 John Wiley & Sons, Inc.     

IRMOF-1衍生介孔ZnO微球催化合成低聚聚碳酸酯二醇

IRMOF-1是一种最经典的IRMOF系列材料,通过直接在空气中不同温度下热处理IRMOF-1得到三种ZnO催化剂,并采用XRD、SEM、BET、CO_2-TPD等分析技术对所得样品的晶体结构、表观形貌、孔结构、表面碱性进行了表征。结果显示,ZnO为球状结构,是一种典型的介孔材料,BET比表面积和孔径分别为49.7~62.2 m2/g和2.18~2.92 nm。研究了ZnO微球在碳酸二苯酯(DPC)与新戊二醇(NPG)酯交换合成低聚碳酸酯二醇(PCDL)反应中的催化性能。结果表明,500℃下得到的ZnO微球在DPC与NPG酯交换反应中表现出良好的催化活性。