Comparative behavior of polybutadiene and polynorbornene‐based latices prepared by dispersion ring‐opening metathesis polymerization with a poly(ethylene oxide) macromonomer

This study critically examines the similarities and differences between poly(ethylene oxide) (PEO) stabilized latices of polynorbornene and polybutadiene. Features such as the kinetics of copolymerization of norbornene and cyclooctadiene with a macromonomer of PEO, the particles' size and morphology, the type of copolymer formed, and the stability of these latices were investigated and the results obtained are considered. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2705–2716, 2004     

Glass transitions and mixed phases in block SBS

Differential scanning calorimetry (DSC) does not allow for easy determination of the glass‐transition temperature (T_g) of the polystyrene (PS) block in styrene–butadiene–styrene (SBS) block copolymers. Modulated DSC (MDSC), which deconvolutes the standard DSC signal into reversing and nonreversing signals, was used to determine the (T_g) of both the polybutadiene (PB) and PS blocks in SBS. The T_g of the PB block was sharp, at ?92 °C, but that for the PS blocks was extremely broad, from ?60 to 125 °C with a maximum at 68 °C because of blending with PB. PS blocks were found only to exist in a mixed PS–PB phase. This concurred with the results from dynamic mechanical analysis. Annealing did not allow for a segregation of the PS blocks into a pure phase, but allowed for the segregation of the mixed phase into two mixed phases, one that was PB‐rich and the other that was PS‐rich. It is concluded that three phases coexist in SBS: PB, PB‐rich, and PS‐rich phases. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 276–279, 2005     

Amine‐blocked polyisocyanates. I. Synthesis of novel N‐methylaniline‐blocked polyisocyanates and deblocking studies using hot‐stage fourier transform infrared spectroscopy

A series of substituted N‐methylaniline‐blocked polyisocyanates based on 4,4′‐methylenebis(phenyl isocyanate) and poly(tetrahydrofuran) were prepared and characterized thoroughly with FTIR, ¹H NMR, and ¹³C NMR spectroscopy methods. Compared with unsubstituted N‐methylaniline, a blocking agent with an electron‐releasing substituent at the para position took a shorter time, whereas those with an electron‐releasing substituent at the ortho position or an electron‐withdrawing substituent at the ortho and para positions took longer times for the blocking reaction. The thermal dissociation reactions of blocked polyisocyanates were carried out with an FTIR spectrophotometer attached to hot‐stage accessories under dynamic and isothermal conditions. The dynamic method was used to determine the deblocking temperature, and the isothermal method was used to calculate the deblocking kinetics and activation parameters. The cure times of blocked polyisocyanates with hydroxyl‐terminated polybutadiene were also determined. The deblocking temperatures, the results of cure‐time studies, and the kinetic parameters revealed that the thermal dissociation of the N‐methylaniline‐blocked polyisocyanates was retarded by electron‐donating substituents and facilitated by electron‐withdrawing substituents. The action of N‐methylanilines as blocking agents for isocyanate was explained by the formation of a four‐center, intramolecularly hydrogen‐bonded ring structure during the thermal dissociation of the blocked polyisocyanates. The formation of such a hydrogen‐bonded ring structure was confirmed and supported by variable‐temperature ¹H NMR studies and entropy parameters, respectively. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1557–1570, 2007     

Studies on the blends of cardanol-based epoxidized novolac resin and CTPB

Cardanol-based novolac-type phenolic resins were synthesized with different mole ratios of cardanol-to-formaldehyde, viz., 1:0.6, 1:0.7, and 1:0.8. These novolac resins were epoxidized with molar excess of epichlorohydrin at 120 °C in basic medium. The epoxidized novolac resins were, separately, blended with different weight ratios of carboxyl-terminated polybutadiene liquid rubber ranging between 0-25 wt% with an interval of 5 wt%. All the blends were cured at 150 °C with 40 wt% polyamide. The formation of various products during the curing of blend samples has been studied by Fourier-transform infra-red spectroscopic analysis. The tensile strength and elongation-at-break of the cured samples increased up to 15 wt% in the blend and decreased thereafter. This blend sample was also found to be most thermally stable system. The blend morphology, studied by scanning electron microscopy analysis, was finally correlated with the structural and property changes in the blends.     

1，2—二氯丙烷裂解反应光窗结焦机理的研究

有机化合物在光窗上的结焦严重地影响激光引发化学反应及光学原位实时探测。本文报道在1，2－二氯丙烷反应系统中，光窗结焦现象同时存在于激光引发反应及热反应过程中，对光窗在300℃条件 下的结焦机理研究表明，少量氧气在光窗结焦过程中起关键作用。结焦前驱体的红外光谱研究表明，前驱体的可能结构为1－丙炔－1，3－二醇的缩聚体。该化合物极易通过缩聚反应形成更大的分子，最终导致光 窗结焦。对系统及反应物进行彻底除氧，光窗结焦现象大为改善。     

Application of the essential work of fracture concept to nanostructured polymer materials

The first part of the paper deals with a critical discussion of the methodical basis of essential work of fracture (EWF) concept with respect to the specimen geometry (especially the notch depth) and application to polymers. In the second part, an in situ testing device, which combines a tensile testing machine with an optical strain-field measuring system, has successfully demonstrated possibility of characterization of fracture behaviour of polystyrene-polybutadiene block copolymers and block copolymer/homopolymer blends as examples of nanostructured polymer materials. It has been shown that knowledge of the time evolution of the strain field close to the crack tips leads to a simple verification of the basic precondition for the applicability of the EWF concept, the precondition “plastic zone coalescence-before-stable crack propagation”.     

Helical tubulate inclusion compounds of ferrocene and squalene

The inclusion compounds of 2,8-dimethyltricyclo[5.3.1.1^3,9]dodecane-syn-2,syn-8-diol,3, with ferrocene and with squalene have been prepared. The crystal structures of these helical tubulate compounds: (3)₃·(ferrocene)_0.75 [P3₁21,a=b=13.7480(6),c=7.0312(5) Å,Z=1,R=0.038] and (3)₃·(squalene)_0.23 [P3₁21,a=b=13.677(1),c=7.0533(9) Å,Z=1,R=0.042] are described. Supplementary Data relating to this article are deposited with the British Library as supplementary publication No. SUP 82151 (16 pages).     

Brnsted酸性离子液体催化醛(酮)与二元醇的缩合反应

研究了以Bro¨nsted酸性离子液体1-正丁基-3-甲基咪唑磷酸二氢盐(BMImH2PO4)为催化剂,在不使用其它有机溶剂且无需脱水的条件下,于室温下进行醛(酮)与二元醇的缩合反应,得到了由中至高的转化率和高选择性.产物1,3-二口恶戊烷可以和反应物自动分层,后处理操作简单.过量的醇与离子液体可以多次重复使用,且醛(酮)的转化率无明显降低.     

超声波辐射下金属锰引发芳香醛的偶联反应

超声波引发下Mn-H2O-HOAc体系中进行的一系列芳香醛的偶联反应,室温反应3 h得到45%～71%的邻二醇产品.     

超声辐射下金属锰诱发芳香醛的还原偶联

在超声辐射下，Mn-NH4Cl-THF：H2O(1：4，V：V)或Mn-MnCl2-THF:H2O(1：4， V：V)体系中，于室温2-3h内可使芳香醛还原偶联成邻二醇，收率为30％-95％．与 传统方法相比，反应时间缩短，还原剂用量降低，产品收率提高．