Unprecedented Sequence Control and Sequence‐Driven Properties in a Series of AB‐Alternating Copolymers Consisting Solely of Acrylamide Units

Herein, we report a method to synthesize a series of alternating copolymers that consist exclusively of acrylamide units. Crucial to realizing this polymer synthesis is the design of a divinyl monomer that contains acrylate and acrylamide moieties connected by two activated ester bonds. This design, which is based on the reactivity ratio of the embedded vinyl groups, allows a “selective” cyclopolymerization, wherein the intramolecular and intermolecular propagation are repeated alternately under dilute conditions. The addition of an amine to the resulting cyclopolymers afforded two different acryl amide units, i.e., an amine‐substituted acryl amide and a 2‐hydroxy‐ethyl‐substituted acryl amide in alternating sequence. Using this method, we could furnish ten types of alternating copolymers; some of these exhibit unique properties in solution and in the bulk, which are different from those of the corresponding random copolymers, and we attributed the differences to the alternating sequence.     

Thermoresponsive super water absorbent hydrogels prepared by frontal polymerization

Frontal polymerization was used as an alternative technique for the preparation of super water absorbent hydrogels obtained from acrylamide and 3‐sulfopropyl acrylate, potassium salt (SPAK) in the presence of N,N′‐methylene‐bisacrylamide as a crosslinker. All samples were synthesized in dimethyl sulfoxide, and their swelling behavior in water was investigated. It was found that their features are dependent on the monomer ratio used, which influenced the porous morphology, and consequently, the swelling capability. The swelling ratio ranges from about 1000% for the acrylamide homopolymer up to 14,000% for the sample containing 87.5 mol % of SPAK, thus indicating that this parameter can be easily tuned by using the appropriate monomer ratio. The affinity towards water was eventually confirmed by contact angle analysis. Polymer hydrogels made from at least 62.5 mol % SPAK exhibit a thermoresponsive behavior, with a lower critical solution temperature of ～30 °C. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2486–2490, 2010     

Mechanical Properties and Flow Behavior of Polymers for Enhanced Oil Recovery

The mechanical properties and flow behavior in porous media of three different polymer systems including a hydrophobically modified acrylamide-based copolymer (HMSPAM), a partially hydrolyzed polyacrylamide (HPAM), and a polysaccharide (xanthan gum) were evaluated to establish their functional differentiation as mobility control agents in enhanced oil recovery (EOR). The rheological properties of the polymers were described by the power-law model to investigate their non-Newtonian behavior. The first normal stress difference (N₁) and Weissenberg number (W_e) were also used to compare their elastic properties. The experimental results showed that, at comparable shear viscosity, HMSPAM exhibited significant elasticity compared to HPAM and xanthan gum. Shear resistance tests indicated that all of the polymers experienced an extra stress when converging into a capillary tube due to the “entrance effect.” Xanthan gum was the most mechanically stable polymer. Moreover, HMSPAM showed the superior reformability which was quantified by the regained viscosity with relaxation time. This could be explained by the rapid re-association of the hydrophobic interactions. Sandpack flood tests indicated that HMSPAM rendered extremely high mobility control ability during polymer flooding suggesting its potential in EOR. However, this polymer also experienced significant retention within the porous media (potential injectivity and plugging problems), which may be attributed to the formation of bulky associative polymer networks. In this work, UV spectrometry was employed to monitor the concentration of the produced polymer solutions and quantify the polymer retention within porous media. This analytical approach offers great reliability and simplicity. It was concluded that the use of a particular polymer system depends on the oil reservoir conditions and the target EOR application.     

Synthesis of naringin‐based polymer brushes via seATRP

The flavonoid‐based macromolecule initiator was prepared for the first time by the transesterification reaction of naringin with 2‐bromoisobutyryl bromide. In accordance with the “grafting from” methodology, a naringin‐based copolymer brush with a polar naringenine‐7‐rhamnosidoglucoside core and an amphiphilic poly(methyl methacrylate)‐block‐poly(N‐isopropylacrylamide) (PMMA‐b‐PNIPAM) side chains was synthesized for the first time via a simplified electrochemically mediated ATRP (seATRP), utilizing only 40 ppm of catalytic complex. The rate of the polymerizations was controlled by applying optimal potential or current values during preparative electrolysis to prevent the possibility of intermolecular coupling of the growing polymer brushes. Naturally derived polymer brushes showed narrow molecular weight distributions (Đ = 1.06−1.08). ¹H NMR spectral results confirm the formation of citrus‐based polymer brushes. These new naringin‐based polymer materials may find biomedical applications as thermo‐sensitive drug delivery systems, membranes, and biologically active thin films in tissue engineering.     

Structure in the condensed state and amphiphilic properties of novel copolymers having alkyl chains and phosphatidylcholine analogous groups

N‐Stearylacrylamide (SAAm), N‐oleylacrylamide (OAAm), and N‐laurylacrylamide (LAAm) were synthesized. They were characterized by ¹H‐NMR, ¹³C‐NMR, FT‐IR, melting point measurements, and elemental analysis. The copolymerizations of SAAm, OAAm, and LAAm with 2‐[(3‐(acrylamido)propyl)dimethylammonio]ethyl 2′‐isopropyl phosphate were carried out, and a series of amphiphilic poly(acrylamide)s (1a,b, 2, and 3a,b) were obtained. These copolymers showed polyelectrolyte behavior in their viscous properties in polar solvents. X‐ray diffraction analysis indicated that the copolymers 1a,b formed similar stacked bilayers with hydrophilic groups and hydrophobic parts. The polymorphic phase transition of these copolymers was also observed by DSC. In addition, the monolayers as well as LB films of these amphiphilic copolymers were prepared on the surface of water and their π–A isotherms were investigated at different temperatures. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1293–1302, 1999     

Poly(N,N‐dimethylacrylamide) hydrogels obtained by frontal polymerization

Frontal polymerization (FP) has been used as an alternative technique for the preparation of poly(N,N‐dimethylacrylamide) hydrogels. Samples were synthesized in bulk, water, or dimethyl sulfoxide (DMSO), and the obtained materials were characterized and compared in terms of their yield, swelling behavior, thermal properties, and morphology. It was found that their features are dependent on the presence and type of the solvent used. Samples prepared in bulk are characterized by the lowest yields and the highest front temperatures (T_max) and velocities (V_f), whereas those synthesized in water have the highest yields and the lowest values of T_max and V_f. No significant differences have been found in terms of T_g among the three series of samples. By contrast, the reaction conditions influenced the porous morphology of the samples and, consequently, their swelling capability in water. The swelling ratio ranges from about 670–700% for some samples prepared in water up to 3500% for a sample obtained in DMSO, thus indicating that this parameter can be properly tuned by using the most suitable FP conditions. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1422–1428, 2009     

Flow Characteristics of Partially Hydrolyzed Polyacrylamides during Converging into a Capillary

Partially hydrolyzed polyacrylamides (HPAMs) are the most widely used polymers in enhanced oil recovery (EOR). This study presents capillary flow measurements of three different molecular weight HPAMs in synthetic brine. Polymer solutions having similar viscoelasticity were forced to flow through a 0.23 mm (radius) stainless steel capillary to investigate their flow characteristics including mobility reduction (apparent viscosity) and mechanical stability, represented by the extent of mechanical degradation (DR). The results indicated that the apparent viscosity of the polymer solutions markedly dropped with increasing flow rate until 5 mL/min, corresponding to the shear rate of 8,730s^?1; after that a slight viscosity decrease was observed. The high-molecular-weight HPAMs (6.5 and 8.0 × 10⁶ g/mol) began to have slightly greater apparent viscosity than the low-molecular-weight HPAM (1.0×10⁶ g/mol) above the shear rate of 26,180 s^?1; this might result from the occurrence of the coil-stretch transition. All the HPAMs experienced very similar percentages of mechanical degradation (10%) at shear rates between 1750 and 8730 s^?1; however, above 8730s^?1 the high-molecular-weight HPAMs exhibited a steep increase in mechanical degradation (DR). On the other hand, in the case of the low-molecular-weight HPAM, the DR curve almost leveled off at 12%. Therefore, low-molecular-weight HPAMs are generally suggested for EOR applications. These results, we suggested, should be useful to improve the efficiency of polymer EOR by minimizing mechanical degradation.     

Highly phosphonated poly(N‐phenylacrylamide) for proton exchange membranes

A novel highly phosphonated poly(N‐phenylacrylamide) ( PDPAA ) with an ion‐exchange capacity (IEC) of 6.72 mequiv/g was synthesized by the radical polymerization of N‐[2,4‐bis(diethoxyphosphinoyl)phenyl]acrylamide ( DEPAA ), followed by the hydrolysis with trimethylsilyl bromide. Then, the crosslinked PDPAA membrane was successfully prepared by the electrophilic substitution reaction between the aromatic rings of PDPAA and the carbocation formed from hexamethoxymethylmelamine (CYMEL) as a crosslinker in the presence of methanesulfonic acid. The crosslinked PDPAA membrane had high oxidative stability against Fenton's reagent at room temperature. The proton conductivity of the crosslinked PDPAA membrane was 8.8 × 10^?2 S/cm at 95% relative humidity (RH) and 80 °C, which was comparable to Nafion 112. Under low RH, the crosslinked PDPAA membrane showed the proton conductivity of 1.9 × 10^?3 and 4.7 × 10^?5 S/cm at 50 and 30% RH, respectively. The proton conductivity of the crosslinked PDPAA membrane lied in the highest class among the reported phosphonated polymers, and, consequently, the very high local concentration of the acids of PDPAA (IEC = 6.72 mequiv/g) achieved high and effective proton conduction under high RH. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis of zwitterionic polymer by SET‐LRP at room temperature in aqueous

The Cu⁰‐mediated single electron transfer‐living radical polymerization of acrylamide and N,N‐dimethyl‐N‐methacryloyloxyethyl‐N‐sulfobutyl ammonium in aqueous at 25 °C using 2‐chloropropionamide as initiator with Cu⁰ powder/tris‐(2‐dimethylamino ethyl)amine (Me₆‐TREN) as catalyst system is studied. The results showed the characteristic of the “living” polymerization that were the M_n of polymers increased linearly with monomer conversion and the ln([M]₀/[M]) increased linearly with time too, meanwhile the narrow molecular of weight distributions were found at most cases. Because of the high rate constant of propagation and bimolecular termination of the acrylamide, the external addition of CuCl₂ is required to mediate deactivation the early stage of polymerization. In addition, the disproportionation constant of Cu^IX/L in H₂O is higher than in other solvents and the coordination of amino group and Cu^II takes place easily, so the isopropanol or N,N‐dimethylformamide is added to control the polymerization. High conversions were achieved within short time and the polymers prepared showed good antipolyelectrolyte properties in inorganic salts solutions. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Nitroxide‐mediated controlled statistical copolymerizations of N‐isopropylacrylamide with N‐tert‐butylacrylamide

The copolymerization of N‐isopropylacrylamide (NIPAM) and N‐tert‐butylacrylamide (TBAM) via conventional radical polymerization and nitroxide‐mediated polymerization (NMP) with N‐tert‐butyl‐N‐[1‐diethylphosphono‐(2,2‐dimethylpropyl)]nitroxide (SG1) was investigated. The monomer reactivity ratios were determined to be 0.58 and 1.00 for NIPAM and TBAM, respectively. The reactivities were approximately the same at 120 and 60 °C in N,N‐dimethylformamide (DMF) and toluene, respectively, for the conventional copolymerizations and in DMF at 120 °C for NMP. Controlled/living characteristics for NMP were achieved with a 2,2′‐azobisisobutyronitrile/SG1 bimolecular system and a unimolecular polystyrene [poly(STY)]–SG1 macroinitiator in the presence of excess free SG1. Block copolymers of poly(N‐isopropylacrylamide‐stat‐N‐tert‐butylacrylamide) [poly(NIPAM‐stat‐TBAM)] with styrene {poly(N‐isopropylacrylamide‐stat‐N‐tert‐butylacrylamide)‐block‐polystyrene [poly(NIPAM‐stat‐TBAM)‐block‐poly(STY)]} were obtained by chain extension of either poly(NIPAM‐stat‐TBAM)–SG1 with styrene or poly(STY)–SG1 with NIPAM/TBAM. A comparison of the number‐average molecular weight calculated from the end‐group content with the number‐average molecular weight measured by gel permeation chromatography for poly(NIPAM‐stat‐TBAM)‐block‐poly(STY)–SG1 indicated that nearly all poly(NIPAM‐stat‐TBAM) chains were capped by SG1 and were thus living. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6410–6418, 2006