Melt‐state polymer chain dimensions as a function of temperature

The unperturbed chain dimensions (〈R²〉_o/M) of cis/trans‐1,4‐polyisoprene, a near‐atactic poly(methyl methacrylate), and atactic polyolefins were measured as a function of temperature in the melt state via small‐angle neutron scattering (SANS). The polyolefinic materials were derived from polydienes or polystyrene via hydrogenation or deuteration and represent structures not encountered commercially. The parent polymers were prepared via lithium‐based anionic polymerizations in cyclohexane with, in some cases, a polymer microstructure modifier present. The polyolefins retained the near‐monodisperse molecular weight distributions exhibited by the precursor materials. The melt SANS‐based chain dimension data allowed the evaluation of the temperature coefficients [dln 〈R²〉_o/dT(κ)] for these polymers. The evaluated polymers obeyed the packing length (p)‐based expressions of the plateau modulus, G = kT/np³ (MPa), and the entanglement molecular weight, M_e = ρN_anp³ (g mol^?1), where n_t denotes the number (～21) of entanglement strands in a cube with the dimensions of the reptation tube diameter (d_t) and ρ is the chain density. The product np³ is the displaced volume (V_e) of an entanglement that is also expressible as pd or kT/G. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1768–1776, 2002     

负泊松比蜂窝材料的动力学响应及能量吸收特性

针对传统正方形蜂窝,通过用更小的双向内凹结构胞元替代原蜂窝材料的结构节点,得到了一种具有负泊松比特性的节点层级蜂窝材料模型。利用显式动力有限元方法,研究了冲击荷载作用下该负泊松比蜂窝结构的动力学响应及能量吸收特性。研究结果表明,除了冲击速度和相对密度,负泊松比蜂窝材料的动力学性能亦取决于胞元微结构。与正方形蜂窝相比,该负泊松比层级蜂窝材料的动态承载能力和能量吸收能力明显增强。在中低速冲击下,试件表现为拉胀材料明显的"颈缩"现象,并展示出负泊松比材料独特的平台应力增强效应。基于能量吸收效率方法和一维冲击波理论,给出了负泊松比蜂窝材料的密实应变和动态平台应力的经验公式,以预测该蜂窝材料的动态承载能力。本文的研究将为负泊松比多胞材料冲击动力学性能的多目标优化设计提供新的设计思路。     

羊八井50m2RPC实验及初步测试结果

介绍了羊八井50m²电阻板室(RPC)地毯实验的结构、安装和对其性能的初步测试.测试的结果表明RPC完全能够很好地在海拔4300m,气压594mbar的羊八井宇宙线观测站正常地运行.     

IPG with electrodic plateaus (and other unusual procedures for 2-DE)

We describe some simple changes to the geometry of the IPG strips that make them suitable to the loading of very large sample volumes and of high-salt solutions. Of special relevance is the possibility of using strips with immobilized plateau(s) to either side of the gradient, or to both, also in connection with in-gel rehydration protocols and focusing in stock trays. The only requirement to achieve this is to leave the all-ready-made attitude and go back to custom polymerization of the IPGs in one's laboratory.     

Mechanism of proton anisotropic velocity distribution in the solar wind

Although it has been long that spacecraft observed the anisotropy of velocity protons in the solar wind, there is still not a reasonable explanation. In this paper we try to give an explanation from the diffusion plateau of protoncyclotron resonance predicted by the quasi-linear theory for the resonance between the protons and the parallel propagating waves. We consider the effect of dispersion relation on diffusion plateau and notice that the diffusion plateau we have got by using cold plasma dispersion relation accords with the density contours in the velocity phase space detected at 0.3 AU in fast solar wind. For explaining proton distributions obtained in the fast solar wind from 0.7 AU to 1 AU hot plasma dispersion relation should be considered. We also give a theoretical relation of proton thermal anisotropy A and plasma parameter β.     

Linear elastico-viscous properties of molten standard polystyrenes

This paper contains an extensive presentation of dynamic mechanical data (complex moduli), as obtained on the melts of a series of standard polystyrenes of narrow molar mass distributions. It also shows the way of obtaining structural parameters (plateau modulus and friction factor) which are needed for an interpretation of these data in terms of simple theoretical models (Maxwell elements, Doi-Edwards model). A linear mixing rule is used for taking into account the finite width of the molar mass distributions.Dedicated to Prof. F. R. Schwarzl on the occasion of his 60th birthday     

黄土高原中部秋季干湿的年际和年代际环流异常特征及与海温的多尺度相关性研究

黄土高原地区作为气候敏感区和生态脆弱区地表干 湿状况的年际和年代际变化特征十分明显. 但以往主要是针对夏季进行分析, 而对黄土高原秋季干湿变化规律及大气环流机理的认识非常有限. 本文基于中国589站最近50 a (1961–2010年)月降水和气温月平均资料、NCEP/NCAR提供的再分析资料以及NOAA提供的海表温度(Sea Surface Temperature, SST) 资料, 运用带通/低通滤波、小波分析、EOF/REOF和回归分析等方法, 在对中国秋季干湿时空演化分类的基础上, 通过研究秋季黄土高原中部干湿演变周期、大气环流特征及与海温的多尺度相关关系, 以揭示影响黄土高原中部秋季干湿变化的物理机理, 并确定影响该区域干湿状况的前兆信号. 小波功率谱分析表明, 黄土高原中部秋季干湿指数存在准4 a和准8 a的周期, 1970–1990年准8 a尺度周期振荡尤为明显. 年际(周期≤ 8 a) 尺度上偏湿年的大气环流特征是, 欧亚大陆中高纬呈“双阻型”, 200 hPa西风急流显著北移, 日本海-鄂霍茨克海受反气旋控制, 其底部的偏东水汽输送带将水汽输入研究区. 年代际(周期 > 8 a)尺度上偏湿年的大气环流特征是, 东亚大陆为一致的低值系统; 200 hPa东亚副热带西风急流减弱北移, 研究区主要水汽来源由经孟加拉湾在中南半岛转向的南风水汽输送及中纬度的西风水汽输送组成. 整个序列上, Nino3区SST指数(Nino3I)超前5个月与秋季干湿指数已呈显著的负相关关系, 而孟加拉湾–中国南海SST指数(BayI)则超前3个月与干湿指数呈现显著的负相关关系. 年际尺度上, 秋季Nino3I, BayI均与秋季干湿指数存在显著相关(准4 a, 4–6 a), 而年代际尺度上, 只有BayI与秋季干湿指数存在显著相关性(准10 a). 黄土高原中部秋季干湿的年际和年代际周期的确定、大气环流异常特征的认识及与海温的多尺度相关关系的建立, 不仅揭示了影响该区域干湿变化的物理机理, 也为干旱气候预测提供了重要的前兆信号. 关键词： 黄土高原中部 干湿特征 海表温度 小波分析     

窄间隙室探测器性能测试

山东大学承担ATLAS实验T9型窄隙室TGC探测器的研制任务,本工作测量了TGC探测器在32?0?0V工作电压下的稳定性、漏电流和坪曲线,同时在相同工作条件下、相同时间间隔内测量各信号道的计数率的一致性.初步测量结果表明,由山东大学研制的T9型TGC探测器的各项性能指标达到实验设计要求.     

The Universal Plateau Structure of Lyapunov Exponents for Period Doubling Cascade Attractors

Using algebraic. analysis method for periodic orbits of Hknon map, we derive the boundary equations of stable window and Lyapunov exponent plateau region on the space of nonintegrability parameter A and dissipation parameter J. Ekom the real root of these equations, we obtain the plateau width of Lyapunov exponent W_p = A_p,max - A_p,min and the stable tvindorv width W_s = A_p,max - A_p,min for high periodic orbits. The calculated result of plateau structure ratio α4 = W_p/W_S for period-4 orbit agrees with the conjectural analytical formula: α4 = 2J²/(1+J⁴). Hence our result presents further evidence of universal dependence of Lyapunov exponent plateau structure on the dissipation parameter for period doubling cascade attractors of nonlinear system in transition from order to chaos.     

(n,γ)反应实验研究中的中子屏蔽设计

用射线全吸收型装置(Gamma-ray Total Absorption Facility,GTAF),可以对中子俘获反应截面进行高精度测量。为了降低实验本底,实验中需要对源中子进行准直和屏蔽,还要对被样品散射的中子进行吸收以减少它们进入探测器后所形成的干扰。采用MCNP对中子的准直器、屏蔽体和中子吸收体进行了模拟设计,中子准直屏蔽体材料选用含硼聚乙烯(BC4 的质量分数为3%) 和铅。准直孔直径为13 mm,长度为500mm,经准直后样品处中子束斑坪顶直径为21 mm。中子吸收体材料选用聚乙烯和碳化硼,吸收体球壳内腔半径30 mm,聚乙烯壳层厚度60 mm,碳化硼壳层厚度10 mm,被样品散射的中子经吸收体后衰减93.7%。Neutron capture cross section can be measured by Gamma-ray Total Absorption Facility (GTAF) with high precision. To reduce the background of experiments, the neutron source must be collimated and shielded, and the neutrons scattered from the sample must be absorbed to minimise interference after they go into the detector. The shield, collimator and absorber were simulated and designed with MCNP code. Boron-ontainingpolyethylene with 3% BC4 and lead are used as the materials for the neutron collimator and shield. The diameter of the collimating aperture is 13 mm, and the length of the collimator is 500 mm. After being collimated, the diameter of neutron beam plateau at the sample position is 21 mm. The neutron absorber is made of polyethylene and BC4, and the thickness of polyethylene shell and BC4 shell are 60 and 10 mm, respectively. The simulated result shows that neutrons scattered from the sample can decay 93.7% through the neutron absorber.