Synthesis and characterization of novel perfluorinated polyimides with 3D‐controlled structures for photonic applications

We have designed and synthesized novel perfluorinated polyimides with 3D controlled structure. At first, we successfully developed the new synthetic routes to diamines with pendant bulky perfluorinated aromatic units in a multi‐step synthetic procedure. Novel perfluorinated polyimides were prepared in a two‐step reaction in N‐methyl‐2‐pyrrolidinone (NMP) solution: The first step was for the synthesis of polyamic acids (PAAs) and the second reaction was for the imidization of PAA. The polymer yield was over 89% and the inherent viscosity of PAAs was in the range of 0.24–0.36 dL/g. The thin films were prepared by spin‐coating the PAA solution in NMP onto various substrates such as a Si wafer or a KBr pellet, dried at 80 °C and further cured at 230 °C. The resultant polyimides are thermally stable over 400 °C. The refractive index and birefringence of the resultant polyimides are 1.5858–1.6452 and 0.01–0.005, respectively. The refractive index of polyimide decreases with increasing the fluorine content. The copolymerization and the ether linkages into the backbone reduce the birefringence of polyimides. Surprisingly, the pendant ether linkage is not a crucial factor in reducing the polyimide birefringence. Their birefringence is comparatively very low, compared with that of previous polyimides. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1326–1342, 2006     

Heat effects and rates and molecular mechanisms of water sorption by perfluorinated polymer materials bearing functional groups

The heat effects and the rates and equilibrium quantities of H₂O vapour sorbed and desorbed on polymeric perfluorinated materials (functional groups -SO₃H, -SC₃Na, -SO₃K) and on material treated with FeCl₃ solution as sorbent were investigated.Sorbed H₂O may be completely desorbed in vacuum at 443 K. The material bearing -SO₃H has maximum sorption affinity: the molar heat of -SO₃H wetting is close to that of H₂SO₄ wetting. The differential heat of sorption decreases from 68 kJ mol^–1 atn0(n=H₂O/-SO₃H) to 45 kJ mol^–1 atn5, but not below the heat of H₂O condensation. The -SO₃H samples sorb H₂O vapour in the presence of liquid H₂O at 293 K up ton=17. The -SO₃K material has minimum affinity for H₂O: the equilibrium quantity sorbed in room air is less by a factor of 4 than that for the -SO₃H material. The spatial arrangement of H₂O molecules near the sulpho groups is considered.     

Perfluoro-1,3,5-tris(p-oligophenyl)benzenes: Amorphous Electron-Transport Materials with High-Glass-Transition Temperature and High Electron Mobility

Perfluoro-1,3,5-tris(p-quaterphenyl)benzene (PF-13Y) and perfluoro-1,3,5-tris(p-quinquephenyl)benzene (PF-16Y) have been synthesized and characterized. They showed higher glass transition temperatures compared with perfluoro-1,3,5-tris(p-terphenyl)benzene (PF-10Y). Organic light-emitting diodes were fabricated using these materials as the electron-transport layers. PF-13Y and -16Y are better electron transporters than PF-10Y. The electron mobilities of PF-10Y and Alq₃ were measured by the time-of-flight technique. PF-10Y showed higher electron mobilities (10⁻⁴ cm²/V s) and weaker electric field dependence compared with Alq₃.     

Binding of ferrocene by cyclic trimeric perfluoro-<Emphasis Type="Italic">o</Emphasis>-phenylenemercury. Synthesis and structure of the first double-decker sandwich complex of a sandwich

The first double-decker sandwich complex of a sandwich was synthesized and fully characterized. The complex was prepared by the reaction of cyclic trimeric perfluoro-o-phenylene-mercury (o-C₆F₄Hg)₃ (1) with ferrocene in an ethereal solution at 20 °C and has the composition {[(o-C₆F₄Hg)₃]₂(Cp₂Fe)} (2). The ferrocene sandwich in 2 is located between the planes of two mercury-containing macrocycles and is coordinated to each of them through donation of the -electrons of the ⁵-Cp ligands to vacant orbitals of the mercury atoms of the adjacent molecule 1. It was concluded that all carbon atoms of the ⁵-Cp rings in complex 2 are involved in the bonding to the macrocycles. Complexation with 1 leads to considerable shifts of the (C-H) and (C-H) bands of ferrocene in the IR spectrum to high frequencies. The structure of complex 2 was determined by X-ray diffraction.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2754–2756, December, 2004.     

Synthesis,Structure, Photophysical Properties,and Photostability of Benzodipyrenes

This work explores the syntheses, structures, photophysical properties, and photostability of benzodipyrenes (BDPs). BDPs were synthesized through an InCl₃-AgNTf₂-catalyzed, four-fold alkyne benzannulation reaction. The structures of BDP 4 a and its corresponding endoperoxide product were unambiguously confirmed by X-ray crystallography. The BDPs reported here can also be recognized as peri- and cata-benzannulated pentacenes with a non-functionalized central ring. Unlike the previous reported pentacene-based polycyclic aromatic hydrocarbons, the absorbances of the BDPs were blueshifted by ca. 40 nm relative to pentacene, even after extension of π-conjugation. The newly synthesized BDP products exhibit relatively good stability with half-lives as high as 4612 min in THF.     

Synthesis and Characterization of Benzonitrile-Substituted Silyl Ethers

The silyl ethers (siloxanes) Me_{4? x}Si(OC₆H₅CN)_x (x = 1–4) (1–4), O(Si(OC₆H₄CN) (Me)₂)₂ (5), and Me₃Si–O–C₆F₄CN (6) have been synthesized by the reaction of the respective p-hydroxybenzonitriles and chlorosilanes in the presence of N,N,N′,N′-tetramethylethylenediamine (TMEDA) as hydrogen chloride acceptor. All compounds have been fully characterized by CHN-analysis, melting point, IR, Raman, mass spectroscopy, and ¹H, ¹³C, ²⁹Si NMR spectroscopy. Furthermore, the crystal structures of these compounds—with the exception of Me₂Si(OC₆H₅CN)₂, which is a liquid—were determined by X-ray diffractometry.     

Quantitation of perfluoroalkyl acids,parabens and cotinine from single low volume serum sample by validated analytical method

ABSTRACT

In this paper, we present the results of an analytical method that has been recently developed, validated and successfully applied in a biomonitoring approach. In the environmental pollutant studies it is desirable that the analytical method can determine multiple classes of compounds from a single, small volume sample. The presented analytical method with a simple sample pre-treatment allows the quantitation of 13 perfluoroalkyl acids (PFAAs), 6 parabens and cotinine (used as nicotine biomarker) from a single, small volume of 100 µL serum sample by liquid chromatography-triple quadrupole mass spectrometer (LC-MS/MS). The limits of quantitation (LOQ) for PFAAs, parabens and cotinine were 0.10–0.50, 0.20–0.80 and 0.10 ng/mL, respectively. Besides sensitivity the method has excellent trueness/accuracy and repeatability. The trueness of the method for the determination of PFAAs ranged from 95% to 106% and the repeatability (as RSD %) from 0.6% to 5.6%. The accuracy and RSD for parabens were 73–120% and 1.3–9.7%, respectively, and 100–106% and 1.3–3.5 % for cotinine. Biomonitoring data reveals the presence of several PFAAs and parabens in serum samples of Finnish population. The total concentrations for PFAAs and parabens were from 2.0 to 33 ng/mL and from <LOQ to 1100 ng/mL, respectively. Nearly all non-smokers had the serum cotinine concentration below 1.0 ng/mL, which can be suggested as the cut point for cotinine concentration to identify smoking.     

液相色谱-质谱联用法测定血液中全氟化合物

研究了快速溶剂萃取-液相色谱/质谱联用技术测定血液中PFAAs的方法。血液样品经过冷冻干燥,利用加速溶剂萃取的方法,最后使用液相色谱-质谱仪分析检测PFAAs成分。方法的回收率为74.6%~128.8%,检出限为1.10~25.1 ng/L。通过对珠江三角洲地区人群血液样本的分析,发现∑9PFAAs的浓度为26.8~557 ng/g,平均值为176±90.1 ng/g。血液中PFAAs的主要成分以PFHxA和PFOS为主,分别占血液中PFAAs浓度的20.97%和66.98%。人群血液中最常见和浓度最高的PFAAs是PFOS,而PFOA浓度相对较低。     

长江三角洲地区污水厂污泥中全氟有机酸污染特征

对长江三角洲地区污泥的分析结果表明：脱水剩余污泥中总全氟有机酸（PFAs）的浓度范围为122-1098ng／g,其中三氟乙酸（TFA）和五氟丙酸（PFPrA,除S13未检出外）一般是污染水平最高的两种PFAs,分别为107-562ng／g和4．41-395ng／g,占总PFAs的12％-93％和0．7％-61％,这充分说明在以后的监测中需要将超短链PFAs纳入检测范围．尽管全氟辛酸（PFOA）和全氟辛磺酸（PFOS）的浓度一般低于超短链的TFA和PFPrA,甚至在某些情况下还会低于部分中长链PFCAs,但在绝大多数情况下它们依然是两种主要的PPAs类污染物,浓度分别为2．78-66．9ng／g和1．27-80．4ng／g,占总PFAs的0．7％-8．8％和1％-20％．一般而言,全氟羧酸（PFCAs）的检出率较高,可达92．3％-100％,但是对全氟烷基磺酸（PFSAs）而言,除PFOS的检出率为100％外,全氟丁磺酸（eFBS）和全氟己磺酸（PFHxS）的检出率较低,仅分别为15．4％和7．8％．此外,不同的污水处理工艺可能会严重影响污水处理过程中PFAs污染水平和归趋,造成这种现象的原因可能是不同工艺条件下污泥的吸附性能不同,也可能是不同处理工艺对其前体物的降解转换率不同．