On-surface synthesis of porous graphene nanoribbons containing nonplanar [14]annulene pores

The precise introduction of nonplanar pores in the backbone of graphene nanoribbon represents a great challenge. Here, we explore a synthetic strategy toward the preparation of nonplanar porous graphene nanoribbon from a predesigned dibromohexabenzotetracene monomer bearing four cove-edges. Successive thermal annealing steps of the monomers indicate that the dehalogenative aryl-aryl homocoupling yields a twisted polymer precursor on a gold surface and the subsequent cyclodehydrogenation leads to a defective porous graphene nanoribbon containing nonplanar [14]annulene pores and five-membered rings as characterized by scanning tunneling microscopy and noncontact atomic force microscopy. Although the C–C bonds producing [14]annulene pores are not achieved with high yield, our results provide new synthetic perspectives for the on-surface growth of nonplanar porous graphene nanoribbons.     

石墨烯条带的电子结构与性质:电场及长度效应

在密度泛函理论(DFT)和含时密度泛函理论(TDDFT)的基础上对宽度上含有8个zigzag链的石墨烯条带(8-ZGNR)的基态和激发态的性质进行了理论研究,着重考察了条带长度及电场的影响.B3LYP杂化泛函的计算结果显示:在基态上,8-ZGNR的最低能量态并不具有磁性,随着长度的增加,才会显示出反铁磁的性质.静电场的加入使8-ZGNR显示出反铁磁性和半金属性.在激发态上,诱导电子会随着外激光脉冲的变化而发生移动和变化,但是相比而言,α自旋电子更容易被激发而产生较明显的诱导电子密度,而β自旋电子则更容易脱离外激光场的控制而产生非绝热现象.     

On‐Surface Synthesis and Characterization of Triply Fused Porphyrin–Graphene Nanoribbon Hybrids

On‐surface synthesis offers a versatile approach to prepare novel carbon‐based nanostructures that cannot be obtained by conventional solution chemistry. Graphene nanoribbons (GNRs) have potential for a variety of applications. A key issue for their application in molecular electronics is in the fine‐tuning of their electronic properties through structural modifications, such as heteroatom doping or the incorporation of non‐benzenoid rings. In this context, the covalent fusion of GNRs and porphyrins (Pors) is a highly appealing strategy. Herein we present the selective on‐surface synthesis of a Por–GNR hybrid, which consists of two Pors connected by a short GNR segment. The atomically precise structure of the Por–GNR hybrid has been characterized by bond‐resolved scanning tunneling microscopy (STM) and noncontact atomic force microscopy (nc‐AFM). The electronic properties have been investigated by scanning tunneling spectroscopy (STS), in combination with DFT calculations, which reveals a low electronic gap of 0.4 eV.     

Molecularly engineered graphene surfaces for sensing applications: A review

Graphene is scientifically and commercially important because of its unique molecular structure which is monoatomic in thickness, rigorously two-dimensional and highly conjugated. Consequently, graphene exhibits exceptional electrical, optical, thermal and mechanical properties. Herein, we critically discuss the surface modification of graphene, the specific advantages that graphene-based materials can provide over other materials in sensor research and their related chemical and electrochemical properties. Furthermore, we describe the latest developments in the use of these materials for sensing technology, including chemical sensors and biosensors and their applications in security, environmental safety and diseases detection and diagnosis.     

非近邻跳跃对扶手椅型石墨烯纳米带电子结构的影响

根据π电子的紧束缚模型,将电子的次近邻和第三近邻跳跃能考虑在内,得到扶手椅型石墨烯纳米带（AGRNs）能带结构的解析解.讨论了由次近邻和第三近邻电子跳跃引起的能带和能隙变化,发现次近邻和第三近邻跳跃分别对带隙产生增大和减小的影响. 比较了边界弛豫与非近邻跳跃之间的互相竞争关系. 当纳米带的宽度n为奇数时,二维石墨面的紧束缚模型中所固有的van Hove奇异性表现为AGRNs中的无色散带. 当AGRNs宽度增加时,能谱趋向于二维石墨烯时的能谱结构. 关键词： 扶手椅型石墨烯纳米带 非近邻跳跃 边界弛豫 电子结构     

Chiral selective tunneling induced graphene nanoribbon switch

An armchair graphene nanoribbon switch has been designed based on the principle of the Klein paradox. The resulting switch displays an excellent on-off ratio performance. An anomalous tunneling phenomenon, in which electrons do not pass through the graphene nanoribbon junction even when the conventional resonance condition is satisfied, is observed in our numerical simulations. A selective tunneling rule is proposed to explain this interesting transport behavior based on our analytical results. Based on this selective rule, our switch design can also achieve the confinement of an electron to form a quantum qubit.      

石墨烯纳米带电极区N掺杂电子输运性质研究

运用密度泛函理论和非平衡格林函数结合的方法,研究电极区N掺杂对扶手椅型石墨烯纳米带电子输运特性的影响.结果表明,与本征扶手椅型石墨烯纳米带电流-电压曲线相比,宽度为7的石墨烯纳米带电流-电压曲线表现出明显的不对称性,其中心N掺杂表现强烈的整流特性,整流系数达到102数量级,且将N原子从电极区中心位置移动到边缘,整流特性减弱.研究结果表明宽度为7的扶手椅型石墨烯纳米带出现强整流现象的原因主要是负向偏压下能量窗内没有透射峰引起的,该研究结果对将来石墨烯整流器件的设计具有重要的意义.     

Modulation of rectification and negative differential resistance in graphene nanoribbon by nitrogen doping

By applying the nonequilibrium Green?s function formalism combined with density functional theory, we have investigated the electronic transport properties of two nitrogen-doped armchair graphene nanoribbon-based junctions M1 and M2. In the left part of M1 and M2, nitrogen atoms are doped at two edges of the nanoribbon. In the right part, nitrogen atoms are doped at one edge and at the center for M1 and M2, respectively. Obvious rectifying and negative differential resistance behaviors are found, which are strongly dependent on the doping position. The maximum rectification and peak-to-valley ratios are up to the order of 10⁴ in M2.     

氢化与非氢化石墨烯纳米条带的密度泛函研究

基于密度泛函理论的第一性原理计算方法,研究了宽度N=8的边缘氢化和非氢化条带的结构和电子性质. 研究表明,扶手形无氢化石墨纳米条带的边缘碳原子是以三重键相互结合,它在边缘的成键强度比氢化时要高,具有更强的化学活性,可作为纳米化学传感器的基础材料. 能带结构计算表明,无论是扶手形条带还是锯齿形条带,它们都是具有带隙的半导体,且无氢化条带的带隙要比氢化的条带带隙宽度大,氢化对于条带的电子性质具有显著修饰作用. 通过锯齿形石墨纳米条带顺磁性、铁磁性和反铁磁性的计算,发现反铁磁的状态最稳定,并且边缘磁性最强,这有利于条带在自旋电子器件中的应用. 关键词： 石墨纳米条带 成键机理 电子结构 自旋分布     

含Stone-Wales缺陷zigzag型石墨烯纳米带的电学和光学性能研究

本文采用基于密度泛函理论的第一性原理对zigzag型石墨烯纳米带中含有不同Stone-Wales缺陷的电子结构特性和光学性能进行研究. 考虑了两种模型:不计电子自旋和考虑电子自旋的情况.研究发现:不计电子自旋情况下,含对称Stone-Wales缺陷的石墨烯纳米带在缺陷区域出现了凹凸不平的折皱构型,两种不同的Stone-Wales缺陷都引起了电荷的重新分布.考虑电子自旋时,Stone-Wales缺陷的引入对石墨烯纳米带自旋密度有显著影响,也引起了不同自旋的电子态密度的变化.进一步研究了纳米带的光学性能,发现 关键词： 石墨烯纳米带 Stone-Wales缺陷 电子结构 光学性能