Analysis of Organic Compounds in Antarctic Snow and Their Origin

Abstract

Organic compounds extractable with n-hexane were identified and quantitatively determined in pack, surface and deep snow samples taken at different depths and collected at several altitudes above sea level from Antarctica during the 1993/94 Italian expedition. The comparison between the composition of organic compounds in snow and the ones in pack and sea-water samples pointed out that the three matrices substantially contain the same biogenic and anthropogenic organic compounds. The contribution of marine aerosol to organic content in the snow is confirmed by the enrichment ratios calculated for the more representative classes of identified compounds (n-alkanes, phthalates and low molecular weight alkylbenzenes). The changes in the composition of organic compounds in snow as the altitude increases seem to depend on the dimensional spectrum of the aerosol. Thus, smallest particles, richest in surfactant material, reach the highest altitudes.     

纯电动汽车磷酸铁锂电池组的建模及优化

鉴于传统神经网络和支持向量机机理复杂、计算量大的缺陷,很难实时跟踪磷酸铁锂电池组复杂快速的内部反应,影响电池荷电状态的估算精度,提出应用一种简单、有效的极限学习机对一额定容量为100Ah、额定电压为72V的纯电动汽车磷酸铁锂电池组建模,并分别与BP神经网络、RBF神经网络、支持向量机进行对比。随后,以学习时间和泛化性能为优化目标,应用粒子群方法寻找最佳隐层节点个数。结果表明,基于极限学习机的磷酸铁锂电池组模型的学习时间、泛化性能优于BP神经网络、RBF神经网络、支持向量机;隐层节点优化后,模型的学习时间和泛化性能达到最优。     

多目标0-1规划问题的元胞狼群优化算法研究

针对多目标0-1规划问题,首先基于元胞自动机原理和人工狼群智能算法,提出一种元胞狼群优化算法,该算法将元胞机的演化规则与嚎叫信息素更新规则、人工狼群更新规则进行组合,采用元胞及其邻居来增强搜索过程的多样性和分布性,使人工头狼在元胞空间搜索的过程中,增强了人工狼群算法的全局搜索能力,并获得更多的全局非劣解;其次结合多目标0-1规划模型对元胞狼群算法进行了详细的数学描述,定义了人工狼群搜索空间、移动算子、元胞演化规则和非劣解集更新规则,并给出了元胞狼群算法的具体实现步骤;最后通过MATLAB软件对3个典型的多目标0-1规划问题算例进行解算,并将解算结果与其它人工智能算法的结果进行比较,结果表明:元胞狼群算法在多目标0-1规划问题求解方面可获得更多的非劣解集和更优的非劣解,并具有较快的收敛速度和较好的全局寻优能力。     

Microstructure and high-temperature corrosion behaviors of aluminide coatings by low-temperature pack aluminizing process

Aluminide coatings were produced on carbon steel and Fe-5Cr-Mo alloy at a relatively lower temperature below 600 °C in shorter treatment time by a combination of surface refinement process and pack aluminizing process. Repetitive ball impact, generated by mechanical vibration, caused the top-layer refinement of substrates in a conventional pack aluminizing process. The effects of temperature and treatment time on the formation of aluminide coatings were analyzed. The microstructure of the coatings was investigated by SEM, AFM and XRD. The aluminide coatings were one-layer, compacted structure with ultrafine grains and uniform elemental distribution. High-temperature oxidation and sulphidation tests were carried out at 600 °C in air for 200 h and 10% SO₂ + Ar gas mixture atmosphere for 50 h, respectively. The mass gains and spallation indicated that the aluminide coatings significantly improved the high-temperature oxidation and sulphidation resistance.     

薄膜多层滚压的表面粗糙度晶体学分析

提出了晶体学模型来研究多层薄膜滚压的表面粗糙度。研究了单层滚压模型,提出滚压的三维模型和二维模型（平面应变）,讨论了晶粒大小和应力状态的影响。把单个单层滚压和多层滚压模型、三维模型和平面应变模型进行了比较,发现对于所涉及的二维和三维模型来说,单层滚压和多层滚压模型并无明显的差别。因此在这些情况下,可以用单个单层滚压模型来代替多层滚压模型从而节省CPU时间。     

微乳酸的缓蚀行为及其在岩心中的酸化效果

微乳酸的缓蚀行为及其在岩心中的酸化效果;土酸;微乳酸;油藏;缓蚀;填砂管;岩心     

稀土对低温固体硼碳氮共渗作用的研究

采用Ｘ射线衍射仪,恒电位仪,摩擦磨损试验机等设备,研究了低温硼碳氮稀土（Ｂ－Ｃ－Ｎ－ＲＥ）共渗工艺及共渗层的组织性能,并与硼碳氮（Ｂ－Ｃ－Ｎ）共渗工艺及组织性能进行了比较。在适当范围内,稀土具有明显的催渗作用;与Ｂ－Ｃ－Ｎ共渗相比,Ｂ－Ｃ－Ｎ－ＲＥ共渗层的耐蚀性明显提高。对稀土元素的作用机制作了初步的探讨。     

Network model evaluation of permeability and spatial correlation in a real random sphere packing

In principle, network models can replicate exactly the microstructure of porous media. In practice, however, network models have been constructed using various assumptions concerning pore structure. This paper presents a network model of a real, disordered porous medium that invokes no assumptions regarding pore structure. The calculated permeability of the model agrees well with measured permeabilities, providing a new and more rigorous confirmation of the validity of the network approach. Several assumptions commonly used in constructing network models are found to be invalid for a random packing of equal spheres. In addition, the model permits quantification of the effect of pore-scale correlation (departure from randomness) upon permeability. The effect is comparable to reported discrepancies between measured permeabilities and predictions of other network models. The implications of this finding are twofold. First, a key assumption of several theories of transport in porous media, namely that pore dimensions are randomly distributed upon a network, may be invalid for real porous systems. Second, efforts both to model and to measure pore-scale correlations could yield more accurate predictions of permeability.     

The characteristics of chromized 1020 steel with electrical discharge machining and Ni electroplating pretreatments

A uniform and continuous chromized coating on AISI 1020 steel is produced by low-temperature pack chromization (LTPC) with electrical discharge machining and Ni electroplating pretreatments. The anticorrosive performance of the chromized steels is investigated in a 0.5 M H₂SO₄ solution at room temperature. The testing results indicate that the chromized specimen with electrical discharge machining and Ni electroplating pretreatments exhibits the lowest corrosion current density, 2.16 × 10⁻⁸ A cm⁻², among the tested specimens. The corrosion resistance of all tested specimens are in the order of bare 1020 < 1020-Cr(700-2) < 1020-Ni-Cr(700-2) < 1020-EDM-Ni-Cr(700-2). Moreover, the 1020-Ni-Cr(700-2) specimen have the best conductivity as a result of the less amount of oxides in the superficial coating.     

Analysis on the capacity degradation mechanism of a series lithium-ion power battery pack based on inconsistency of capacity

The lithium-ion battery has been widely used as an energy source. Charge rate, discharge rate, and operating tem- perature are very important factors for the capacity degradations of power batteries and battery packs. Firstly, in this paper we make use of an accelerated life test and a statistical analysis method to establish the capacity accelerated degradation model under three constant stress parameters according to the degradation data, which are charge rate, discharge rate, and operating temperature, and then we propose a capacity degradation model according to the current residual capacity of a Li-ion cell under dynamic stress parameters. Secondly, we analyze the charge and discharge process of a series power battery pack and interpret the correlation between the capacity degradations of the battery pack and its charge/discharge rate. According to this cycling condition, we establish a capacity degradation model of a series power battery pack under inconsistent capacity of cells, and analyze the degradation mechanism with capacity variance and operating temperature difference. The comparative analysis of test results shows that the inconsistent operating temperatures of cells in the series power battery pack are the main cause of its degradation; when the difference between inconsistent temperatures is narrowed by 5 ℃, the cycle life can be improved by more than 50%. Therefore, it effectively improves the cycle life of the series battery pack to reasonably assemble the batteries according to their capacities and to narrow the differences in operating temperature among cells.