反恐怖安全检测技术的物理基础

反恐怖安全检测技术已成为人们的热门话题。安全检测技术的诞生和发展离不开物理学家的贡献。物理学为反恐怖安全检测孕育了多种手段和方法。文章简要介绍了X射线探测、γ射线探测、四极共振分析、脉冲式快中子分析、离子迁移率光谱测量、毫米波探测、声学探测、磁场探测、电磁脉冲探测等安全检测技术的物理基础。     

位相物体激光全息二次曝光法无损检测

为借助激光全息进行无损检测，获得位相物体的信息，对位相物体激光全息二次曝光法无损检测进行了研究，指出一般的二次曝光法测位相物体典型光路的缺点，提出了物光波2次通过样品的改进方案。利用此方案对一些位相物体(如普通玻璃和有机玻璃)作了无损检测实验，得到了较满意的实验结果。与普通检测方法相比，该方法具有精度高、结果直接可靠、不损伤物体等诸多优点。对改进方案稍作改动，即可用于塑料制品和玻璃制品生产线对加工产品进行在线产品质量监控。     

桑蚕种样本良卵数偏差控制方法研究

桑蚕种良卵率是蚕种质量检验的重要指标,控制样本间良卵数偏差是保证良卵率准确性的关键.运用概率理论,针对目前生产上绝大多数批次的良卵率p 99%情况,在置信概率为95%下,样本卵粒数在1601~1700、1701~1800、1801~1900、1901~2000区间内时,给出了样本良卵数的容许偏差分别为16、17、17、18粒;当良卵率p在99%~90%其他区间时,也分别给出了不同克卵粒数情况下样本良卵数的容许偏差.同时在置信概率为90%下,给出了不同克卵粒数情况下样本良卵数的容许偏差.结合实际调查结果,对理论方法进行了比较,确认了理论方法的准确性,为蚕业生产提供了一套控制良卵数偏差的可行性方案.     

一种检验定性指标的有效方法

介绍了一种检验定性指标的有效方法,可用于确定产品的合格率和评价检验人员的检验水平。用该方法分析了某厂产品的一项实际指标,合格率为91 4%,还对该厂10名检验员的检验水平作了客观的评价。     

Static and dynamic detection of axial surface defects on metallic wires by conical triple laser reflection

The quality of the surface of metallic wires is relevant for different applications. The reflection of a laser beam on the surface of a metallic cylindrical wire provides an efficient way to inspect the quality of its surface. Our interest is focused in the detection of axially oriented defects, which are the most relevant for the wire drawing process. We present a simple interference-geometrical model to describe the light pattern reflected from a wire with defects. This model adequately accounts for the observed results from an industrial prototype developed for the purpose. It incorporates three-laser beams incident on the wire at equidistant locations in its perimeter, which produce three reflection cones with a CCD. This configuration permits to explore the whole perimeter of the wire. Several results are presented, both in static operation and in production line, in agreement with qualitative and quantitative predictions.     

偏振小孔干涉仪

偏振小孔干涉仪是一种可实用的新型干涉仪。它综合小孔衍射技术、偏振技术和共光路设计为一体,具有条纹对比度可调、抗干扰能力强和非接触检验等优点,可广泛用于各种光学元件及其胶合层的检验。目测精度达1/10λ,计算机条纹处理精度可调。     

基于课程标准的教学——以常见阴、阳离子的检验为例

以常见的阴、阳离子的检验为例，研究了如何实施基于标准的教学。校本教材的开发为标准、教材、教学、评价的一致性提供保障；以学生应知的和能做的驱动课堂活动；根据达成标准应有怎样的质量表现，试卷编制先于教学设计。课堂上，“教”“学”双方都明确学习目标，教师提供多种策略来满足学生多样的学习需要，如提供工具，搭建脚手架，并以“微”研究性学习的方式展开教学，给学生提供了充分的进步空间。     

傅里叶变换红外光谱和傅里叶变换拉曼光谱法无损鉴别药材的真伪

利用傅里叶变换红外（FT-IR）和近红外傅里叶变换拉曼（NIR FT-aman）光谱法对大黄（西宁大黄）与伪品大黄（华北大黄、山大黄、水根大黄）进行了无损快速的鉴别。结果表明：尽管正品大黄与伪品大黄差别较小，有大部分的化学成分有很大的相同之处，但在红外、拉曼谱图中各自的特征峰较突出，根据谱峰的强度和位置可容易地将它们区别开来。红外和拉曼光谱法相互印证，相互补充，具有快速、准确、操作简单、重复性好、不需对样品进行分离提取，可直接鉴别等特点。     

Three bits eight states photochromic recording and nondestructive readout by using IR light

A photochromic polymer film containing three different diarylethene derivatives, that is, 1,2-bis(3,5-dimethyl-2-thienyl)perfluorocyclopentene (1), 1,2-bis(2,5-dimethyl-3-thienyl)perfluorocyclopentene (2), and 1,2-bis(2-methyl-5-phenyl-3-thienyl)perfluorocyclopentene (3) was prepared. Upon UV irradiation, the three derivatives changed to their closed-ring isomers having different colors, yellow, red, and blue. They showed different spectra not only in UV/Vis region but also in the IR spectral region. Upon irradiation with visible light of appropriate wavelengths, each closed-ring isomer was selectively bleached, and three bits eight states recording was performed. The eight states could be read out nondestructively by using IR light of appropriate wavenumbers.     

Probabilistic approaches to compute uncertainty intervals and sensitivity factors of ultrasonic simulations of a weld inspection

For comprehension purpose, numerical computations are more and more used to simulate the propagation phenomena observed during experimental inspections. However, the good agreement between experimental and simulated data necessitates the use of accurate input data and thus a good characterization of the inspected material. Generally the input data are provided by experimental measurements and are consequently tainted with uncertainties. Thus, it becomes necessary to evaluate the impact of these uncertainties on the outputs of the numerical model. The aim of this study is to perform a probabilistic analysis of an ultrasonic inspection of an austenitic weld containing a manufactured defect based on advanced techniques such as polynomial chaos expansions and computation of sensitivity factors (Sobol, DGSM). The simulation of this configuration with the finite element code ATHENA2D was performed 6000 times with variations of the input parameters (the columnar grain orientation and the elastic constants of the material). The 6000 sets of input parameters were obtained from adapted statistical laws. The output parameters (the amplitude and the position of the defect echo) distributions were then analyzed and the 95% confidence intervals were determined.