Mid-infrared generation based on a periodically poled LiNbO3 optical parametric oscillator

We report a nanosecond Nd:YVO_4-pumped optical parametric oscillator (OPO) based on periodically poled LiNbO_3 (PPLN). Tuning is achieved in this experiment by varying the temperature and period of the PPLN. The design of double-pass singly resonant oscillator (DSRO) and confocal cavity enables the OPO threshold to be lowered considerably, resulting in a simple, compact, all-solid-state configuration with the mid-infrared idler powers of up to 466mW at 3.41μm.     

Proton-exchanged optical waveguides fabricated by glutaric acid

In this paper, we first report that a new proton source, glutaric acid, has been used to fabricate optical waveguides in Z-cut lithium niobate crystals. The relationship was experimentally established between proton-exchanged (PE) waveguide parameters and fabrication conditions. It is shown that this new organic acid can be used to obtain deep PE waveguides in fast diffusion speed (0.275 μm²/h at 221°C) and with low loss (0.2 dB/cm). It provides an alternative approach for fabricating PE waveguides in lithium niobate substrate.     

Low-threshold, high-efficiency, high-repetition-rate optical parametric generator based on periodically poled LiNbO3

We report a high-repetition-rate optical parametric generator (OPG) with a periodically poled lithium niobate (PPLN) crystal pumped by an acousto-optically Q-switched CW-diode-end-pumped Nd:YVO_4 laser. For the maximum 1064nm pump power of 970mW, the maximum conversion efficiency is 32.9% under the conditions of 250℃, 1064nm pulse repetition rate of 22.6kHz and pulse width of 12ns, and the PPLN OPG threshold in the collinear case is less than 23.7μJ. The output power increases with the increase of the crystal temperature. The 1485－1553nm signal wave and 3383－3754nm idler wave are obtained by changing the temperature and the angle of the PPLN crystal.     

Microscopically structural studies of lithium niobate powders

On the basis of the crystallographic characteristics of lithium niobate (LN) crystals, Law of Bravais and Pauling's third rule (i.e. Polyhedral Sharing Rule) are employed with the aim to find the relationship between the crystal structure and morphological faces of LN powders. In order to validate our analytical results, we have successfully synthesized LN powders and measured the corresponding X-ray powder diffraction. Our results show that the structural analysis is consistent with the experimental data and is helpful and effective for us to control the single-crystal growth and to design superstructures at the specific plane, starting from the viewpoint of the microscopic behaviors of constituent chemical bonds and polyhedra in the crystallographic frame.     

铌酸锂晶体性能的组成依赖性(英文)

总结了铌酸锂晶体的各项性能指标,显示了其对晶体实际组成的强烈依赖性.利用化学键模型定量地解释了这种依赖性产生的根源,从而说明了制约该晶体性能提高的关键因素是晶体结构中的缺陷控制.     

Processing and characterization of Pb(Mg,Nb)O3-PbTiO3 thin films from metal alkoxide-derived gels

The sol-gel processing is one of promising methods to fabricate well-derived integrated thin films at relatively low temperature. Ferroelectric niobates films do afford the possibilities for adding the values by the hybridization with semiconductor and/or electro-optic systems. The molecular level designing of the precursor solution was stressed as well as the control of key processing factors. The advantages of this sol-gel have been extended to prepare the ferroelectric Pb(Mg, Nb)O₃-PbTiO₃ solid solution films integrated on Si wafers. The crystallization of the films with desired crystal structure could be promoted by the controlled partial hydrolysis of designed alkoxide solution in the intermediate state and the pre-heated treatment of alkoxide-derived films in flow of water vapor and oxygen gas mixture.     

Synthesis and Structure of Ba[ZrN2] and Ba2[NbN3]

Ba₃N₂ reacts at 950°C under pure N₂ with Zr to yield dark red, air-sensitive Ba[ZrN₂]. This new compound crystallizes in the tetragonal space group P4/nmm with a = 416.10(2), c = 839.2(1) pm and Z = 2. The crystal structure was solved and refined using X-ray and neutron powder diffraction data. In the nitrido zirconate [ZrN₂]^2? the Zr atoms exhibit a square-pyramidal coordination by five N atoms at distances of 201(3) and 220.2(2) pm. The pyramids share all the edges in the basal plane to form layers parallel to (001) with their apices alternately pointing up and down. The Ba²⁺ cations are integrated into these layers at the levels of the pyramidal apices. The structure can be interpreted as a stuffed PbFCl type. Ba₂[NbN₃] is formed by the reaction of Ba₃N₂ and NbN or of Ba and Nb at 1 000°C under N₂. Isostructural to Ba₂[TaN₃] it crystallizes in the monoclinic space group C2/c with a = 613.2(3), b = 1 176.8(3), c = 1 322.9(4) pm, β = 91.65(2)°, Z = 8. The nitrido niobate anions form chains of corner sharing NbN₄ tetrahedra with distances Nb? N between 188(1) and 199.9(9) pm.     

Heat capacity, enthalpy and entropy of bismuth niobate and bismuth tantalate

The heat capacity and the heat content of bismuth niobate BiNbO₄ and bismuth tantalate BiTaO₄ were measured by the relaxation method and Calvet-type heat flux calorimetry. The temperature dependencies of the heat capacities in the form C_pm=128.628+0.03340 T−1991055/T²+136273131/T³ (J K^-1 mol^-1) and 133.594+0.02539 T−2734386/T²+235597393/T³ (J K^-1 mol^-1) were derived for BiNbO₄ and BiTaO₄, respectively, by the least-squares method from the experimental data. Furthermore, the standard molar entropies at 298.15 K S_m(BiNbO₄)=147.86 J K^-1 mol^-1 and S_m(BiTaO₄)=149.11 J K^-1 mol^-1 were assessed from the low temperature heat capacity measurements. To complete a set of thermodynamic data of these mixed oxides an attempt was made to estimate the values of the heat of formation from the constituent binary oxides.     

Structural Study of an Unusual Cubic Pyrochlore Bi1.5Zn0.92Nb1.5O6.92

Single-phase pyrochlore-type specimens of Bi_1.5Zn_0.92Nb_1.5O_6.92 were studied using combined electron, X-ray and neutron powder diffraction techniques. Rietveld refinements using neutron powder diffraction data confirmed an average pyrochlore structure A₂B₂O₆O′ (Fd&3macr;m, a=10.5616(1) Å) with both Bi and Zn mixed on the A-sites. However, refinements revealed significant local deviations from the ideal pyrochlore arrangement which were caused by apparent displacive disorder on both the A and O′ sites. The best fit was obtained with a disordered model in which the A-cations were randomly displaced by ∼0.39 Å from the ideal eight-fold coordinated positions. The displacements occur along the six 〈112〉 directions perpendicular to the O′-A-O′ links. In addition, the O′ ions were randomly displaced by ∼0.46 Å along all 12 〈110〉 directions. Crystal-chemical considerations suggest the existence of short-range correlations between the O′ displacements and both the occupancy of the A-sites (i.e., Bi or Zn) and the directions of the A-cation displacements. The combined A-cation and O′ displacements change the coordination sphere of the A-cations from 8 to (5+3); the resulting coordination environment of the A-cations bears similarities to that of the (5+1)coordinated Zn in zirconolite-like Bi₂Zn_2/3Nb_4/3O₇. The observed displacive disorder in the A₂O′ network of the Bi_1.5Zn_0.92Nb_1.5O_6.92 structure involves atoms associated with the lowest-frequency vibrational bending mode, and is likely responsible for both the high dielectric constant and the dielectric relaxation reported for this compound.     

Preparation and Crystal Structure of PrNb_5O_(14)

ＰｒｅｐａｒａｔｉｏｎａｎｄＣｒｙｓｔａｌＳｔｒｕｃｔｕｒｅｏｆＰｒＮｂ_５Ｏ_（１４）￥ＭａｏＪｉａｎｇ－Ｇａｏ；ＺｈｕａｎｇＨｏｎｇ－Ｈｕｉ；ＨｕａｎｇＪｉｎ－Ｓｈｕｎ（ＳｔａｔｅＫｅｙＬａｂｏｒａｔｏｒｙｏｆＳｔｒｕｃｔｕｒａｌＣｈｅｍｉｓｔｒｙ...