Diffraction grating in noncrosslinked polymers

The diffraction efficiency and morphology of the transmission modes of holographic polymer dispersed liquid crystals were studied with respect to the molecular structure of poly(urethane acrylate) (PUA), the film (polymer/liquid crystal) and resin (oligomer/monomer) compositions, and the cell thickness. PUA, based on N‐vinylpyrrolidone and ethyl hexyl acrylate, with low‐molecular‐weight poly(propylene glycol) at a low oligomer content, showed high diffraction efficiency. The results were interpreted in terms of the monomer reactivity and polymer elasticity. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 613–620, 2004     

Preparation of nanometer MgO by sol-gel auto-combustion

Nanometer MgO was prepared via a sol-gel auto-combustion technique using magnesium nitrate as raw material and citric acid as chelating agent. IR spectra of the dried gel were used to investigate the structure of the precursors. By studying the different TG curves of magnesium citrate gel prepared by different methods, we found that a combustion process occurred and the nitrate ions acted as an oxidant in the combustion process. TEM photographs of synthesized powders from the sol-gel auto-combustion showed that the crystallites were uniform in size. In addition, the XRD pattern of this sample showed that the particle size was 8.9 nm. The BET curves, in turn, showed that the specific surface of the sample was 26.34 m²/g. The mechanism of the frothing process in restraining agglomeration is discussed. __________ Translated from Journal of East China Normal University (Natural Science), 2007, (2): 52–57 [译自: 华东师范大学学报(自然科学版)]     

Structure induced by irradiation of femtosecond laser pulse in dyed polymeric materials

We investigated the structures induced by an irradiation of a near‐infrared (NIR) femtosecond laser pulse in dye‐doped polymeric materials {poly(methyl methacrylate) (PMMA), thermoplastic epoxy resin (Epoxy), and a block copolymer of methyl methacrylate and ethyl acrylate‐butyl acrylate [p(MMA/EA‐BA) block copolymer]}. Dyes used were classified into two types—type 1 with absorption at 400 nm and type 2 with no absorption at 400 nm. The 400‐nm wavelength corresponds to the two‐photon absorption region by the irradiated NIR laser pulse at 800 nm. Type 1 dye‐doped PMMA and p(MMA/EA‐BA) block copolymer showed a peculiar dye additive effect for the structures induced by the line irradiation of a NIR femtosecond laser pulse. On the contrary, dye‐doped Epoxy did not exhibit a dye additive effect. The different results among PMMA, p(MMA/EA‐BA) block copolymer, and Epoxy matrix polymers are supposed to be related to the difference of electron‐acceptor properties. The mechanism of this type 1 dye‐additive‐effect phenomenon for PMMA and p(MMA/EA‐BA) block copolymer is discussed on the basis of two‐photon absorption of type 1 dye at 400 nm by the irradiation of a femtosecond laser pulse with 800 nm wavelength and the dissipation of the absorbed energy to the polymer matrix among various transition processes. Dyes with a low‐fluorescence quantum yield favored the formation of thicker grating structures. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2800–2806, 2002     

电化学合成铜配合物的研究

采用金属铜为"牺牲"阳极,首次在无隔膜电解槽中,电化学溶解金属铜一步制备了纳米CuO前体Cu(OEt)2, Cu(OBu)2, Cu(acac)2, Cu(OEt)(acac), Cu(OBu)(acac) (acac为乙酰丙酮基).产物通过红外光谱(FT-IR)、拉曼光谱(Raman spectrum)进行表征.同时讨论了影响电合成铜醇盐及其配合物的关键因素.实验表明,防止阳极钝化,温度控制在30～50 ℃,采用有机胺溴化物为导电盐, 电极电位控制在0.8～1.2 V之间,可以提高电合成效率.实验同时表明Cu(acac)2, Cu(OEt)(acac), Cu(OBu)(acac)可作为制备含铜纳米材料前驱体.     

纳米分辨率的三维形貌检测仪

从光干涉方式，瞳窗关系和光源带宽等基本关系出发，利用空间不变系统理论解析了相移显微干涉检测系统中衍射效应的影响。为了减小横向分辨率对纵向分辨率的影响，利用相关信息提取或数字滤波的方法，获得了纳米分辨率的三维形貌。     

利用光栅最小偏向角法测光波波长

本文导出斜入射时,光栅谱线存在最小偏向角的条件及最小偏向角与波长间的关系,据此精确测定了光波波长,并在实验中通过与垂直入射法的比较显出其优越性。     

不同晶形纳米碳酸钙的制备及其表面改性研究进展

本文综述了不同晶形纳米碳酸钙的制备方法、纳米碳酸钙表面改性技术的研究现状以及表面改性方法,分析了目前纳米碳酸钙制备及表面改性技术存在的问题,并对其发展前景作了展望.     

电场的增强作用对介质膜光栅损伤形貌的影响

研究了电场在介质膜光栅结构中的增强效应对其抗激光损伤阈值的影响.使用傅里叶模式方法计算了电场在介质膜光栅浮雕结构内的分布.数值分析表明：电场在介质膜光栅中增强的最大值为入射光的2倍,其最大的位置出现在相对于入射光对面的光栅槽侧壁。实验测试介质膜光栅样品在1 064 nm和12 ns, 51.2°和TE偏振光入射时,其抗激光损伤阈值为6.61 J/cm2.对损伤形貌进行扫描电镜精确分析,发现介质膜光栅的初始损伤产生于电场在介质膜光栅内增强最大的位置处.     

D形光纤Bragg光栅弯曲灵敏度的理论和实验研究

用材料力学理论分析了D形光纤Bragg光栅（D-shaped fiber Bragg grating,D-FBG）以及常规光纤Bragg光栅由弯曲引起的轴向应变,得到了光栅Bragg波长漂移的弯曲敏感特性.实验结果和理论计算结果基本相符.与常规FBG相比,该D-FBG的弯曲灵敏度要高近80倍.因此D-FBG可以直接应用于弯曲形变的测量,以及间接应用于压力、加速度等物理量的测量.理论分析和实验结果对采用该类型光纤光栅的器件和传感系统的设计具有参考意义.     

激光诱导光栅技术测量磁性液体的热扩散系数

在室温和常压下采用激光诱导光栅技术实验测量不同体积分数的磁性液体的热扩散系数,体积分数分别为5%,6%,7%,8%,9%和10%。由于在磁性液体薄片上的升温非常小以及毫秒级的测量时间,自由对流所产生的影响可以忽略不计。用激光诱导光栅技术测的数据与已有文献中的实验数据比较吻合,从而说明该技术在磁性液体的热扩散测量上是可行的。