恒载超声雾化制取金属粉末的改进方法

本文提出一种改进的超声雾化制取金属粉末方法。克服了因变幅杆负载变化所引起的粉末产率的周期变化，给出装置的框图及有关的参数和实验结果。     

Comparative analysis of heterogeneous solid and soft materials by adsorption, NMR and thermally stimulated depolarisation current methods

Structural characterisation of such bio-objects as fibrinogen solution, yeast cells, wheat seeds and bone tissues has been done using two versions of cryoporometry based on the integral Gibbs-Thomson (IGT) equation for freezing point depression of pore liquids and the measurements by ¹H NMR spectroscopy (180-200 < T < 273 K) and the thermally stimulated depolarisation current (TSDC) method (90 < T < 273 K) of structured water. The IGT equation was solved using a self-consisting regularization procedure including the maximum entropy principle applied to the distribution function of pore size (PSD). Both methods give clear pictures of changes in the structural characteristics caused, e.g., by hydration and swelling of wheat seeds and yeast cells, coagulation and interaction of fibrinogen with solid nanoparticles in the aqueous media, and the human bone tissue disease.     

MORPHOLOGY OF BLACK CARBON AEROSOLS AND UBIQUITY OF 50-NANOMETER BLACK CARBON AEROSOLS IN THE ATMOSPHERE

Different-sized aerosols were collected by an Andersen air sampler to observe the detailed morphology of the black carbon （BC） aerosols which were separated chemically from the other accompanying aerosols, using a Scanning Electron Microscope equipped with an Energy Dispersive X-ray Spectrometer （SEM-EDX）. The results indicate that most BC aerosols are spherical particles of about 50 nm in diameter and with a homogeneous surface. Results also show that these particles aggregate with other aerosols or with themselves to form larger agglomerates in the micrometer range. The shape of these 50-nm BC spherical particles was found to be very similar to that of BC particles released from petroleum-powered vehicular internal combustion engines. These spherical BC particles were shown to be different from the previously reported fullerenes found using Matrix-Assisted Laser Desorption/Ionization Time-Of-Flight Mass Spectrometry （MALDI-TOF-MS）.     

纳米累托石-TiO2光催化剂的制备及表征

以TiCl4和累托石为主要原料，制备出纳米累托石-TiO2粉末，并用X-衍射、透射电镜等对其进行表征．结果表明：纳米累托石-TiO2粉末平均直径为17．5nm当焙烧温度从500℃升至800℃时，累托石-TiO2粉末的比表面积从65．7m^2／g下降至3．3m^2／g，单位质量吸附剂的孔体积从0．1430cm。／u降到0．0213cm^3／g；当焙烧温度从300℃上升至500℃时，孔径变化不大，属中孔范围；当焙烧温度升至800℃时，一些孔道出现坍塌，不利于纳米累托石-TiO2粉末的光催化活性．     

C-V法提取SiC隐埋沟道MOSFET沟道载流子浓度

本文对用C-V法提取SiC隐埋沟道MOSFET沟道载流子浓度的方法进行了理论和实验分析. pn结的存在所造成的埋沟MOS结构C-V曲线的畸变为沟道载流子浓度的提取带来一些问题. SiC/SiO₂界面上界面态的存在也会使提取出的数值与实际数值产生偏差. 本文首先从理论上分别分析了沟道深度和界面态对沟道载流子浓度提取结果的影响，然后对两种沟道深度的埋沟MOS结构C-V曲线进行了测试，提取出了沟道掺杂浓度. 在测试中，采用不同的扫描速率，分析了界面态对提取结果的影响. 理论分析结果和实验测 关键词： C-V法 SiC 隐埋沟道MOSFET 沟道载流子浓度     

DTA and X-ray diffraction investigations of laser-irradiated CeO2 powders

The TG and DTA curves and diffractograms of powdered CeO₂ samples irradiated with a CO₂ laser beam with powers of 0.41–1.39 kW/cm² are presented. The laser treatment induced structural changes and probably generation of a metastable phase. X-ray diffraction coupled with thermal analysis was used to establish the structural modifications in the irradiated samples after heating.     

Compositions for health products obtained by treatment of tomato with beta-cyclodextrin

The aim of this work was to produce lycopene-containing powders from tomato products by a solvent-free method making use of β-cyclodextrin (βCD). Powders were prepared by spray-drying a tomato concentrate (TC), one of the most bioavailable form of lycopene, after mechanical treatment with βCD in different weight ratios. The obtained product was centrifuged to eliminate partly food matrix and characterized for the amount of lycopene hydrodispersed/hydrosolubilized in the aqueous fraction. The chemical antioxidant activity of sera was evaluated too. Powders obtained by spray-drying sera exhibited good flow properties, a lycopene content between 0.4 and 1.09 mg/g and excellent water dispersability. The process developed, which makes use of βCD for the treatment of tomato products, turns to be of great interest to obtain a bulk material for nutraceuticals displaying superior biovailability of lycopene.     

Preparation of nanometer MgO by sol-gel auto-combustion

Nanometer MgO was prepared via a sol-gel auto-combustion technique using magnesium nitrate as raw material and citric acid as chelating agent. IR spectra of the dried gel were used to investigate the structure of the precursors. By studying the different TG curves of magnesium citrate gel prepared by different methods, we found that a combustion process occurred and the nitrate ions acted as an oxidant in the combustion process. TEM photographs of synthesized powders from the sol-gel auto-combustion showed that the crystallites were uniform in size. In addition, the XRD pattern of this sample showed that the particle size was 8.9 nm. The BET curves, in turn, showed that the specific surface of the sample was 26.34 m²/g. The mechanism of the frothing process in restraining agglomeration is discussed. __________ Translated from Journal of East China Normal University (Natural Science), 2007, (2): 52–57 [译自: 华东师范大学学报(自然科学版)]     

HL—1装置SiC涂层辐照实验的表面分析

本文应用表面分析技术研究HL-1装置中SiC涂层的等离子体辐照性能。结果表明,SiC材料应用于孔栏和壁涂层有利于减少杂质和提高等离子体品质。     

The growth of Pd thin films on a 6H-SiC(0 0 0 1) substrate

Pd thin films, grown on Si-rich 6H-SiC(0 0 0 1) substrates, were studied by atomic force microscopy, electron diffraction and high-resolution transmission electron microscopy. It is concluded that the growth is successful only when all the growth process takes place at room temperature. Under these conditions a very good epitaxial growth of Pd is achieved, despite the large misfit (about 8.6%) between Pd and the substrate and the existence of a semi-amorphous layer between the thin film and the substrate. A large number of twins appear in these films.