Crosslinked poly(ethylene oxide) containing siloxanes fabricated through thiol‐ene photochemistry

Homogenous amphiphilic crosslinked polymer films comprising of poly(ethylene oxide) and polysiloxane were synthesized utilizing thiol‐ene “ click ” photochemistry. A systematic variation in polymer composition was Carried out to obtain high quality films with varied amount of siloxane and poly(ethylene oxide). These films showed improved gas separation performance with high gas permeabilities with good CO₂/N₂ selectivity. Furthermore, the resulting films were also tested for its biocompatibility, as a carrier media which allow human adult mesenchymal stem cells to retain their capacity for osteoblastic differentiation after transplantation. The obtained crosslinked films were characterized using differential scanning calorimetry, dynamic mechanical analysis, thermogravimetric analysis, FTIR, Raman‐IR , and small angle X‐ray scattering. The synthesis ease and commercial availability of the starting materials suggests that these new crosslinked polymer networks could find applications in wide range of applications. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1548–1557     

Preparation and Characterization of Activated Carbon from Microwave and Conventional Heated Almond Shells Using Phosphoric Acid Activation

Activated carbon production from almond shells using phosphoric acid activation agent was achieved by applying both conventional heating and microwave heating in succession. The morphology and surface properties of activated carbon were studied using thermogravimetric and differential gravimetric analysis, Fourier-transform infrared spectroscopy, scanning electron microscopy, and Brunauer–Emmett–Teller analysis. A surface area of 1128 m²/g was achieved by optimizing the microwave power (500?W), microwave application time (15?minutes), conventional heating time (45?minutes), conventional heating temperature (500?°C), and the phosphoric acid:sample ratio (0.7:1). An adsorption capacity of methylene blue of 148?mg/g and an iodine value of 791?mg/g was obtained for the prepared activated carbon.     

Scanning tunnelling microscope studies of growth of RuO2（110） thin layer on Ru（0001）

This paper reports that the growth of RuO_x(110) thin layer growth on Ru(0001) has been investigated by means of scanning tunnelling microscope (STM). The STM images showed a domain structure with three rotational domains of RuO_x(110) rotated by an angle of 120℃. The as-grown RuO_x(110) thin layer is expanded from the bulk-truncated RuO_x(110) due to the large mismatch between RuO_x(110) and the Ru(0001) substrate. The results also indicate that growth of RuO_x(110) thin layer on the Ru(0001) substrate by oxidation tends first to formation of the Ru-O (oxygen) chains in the [001] direction of RuO_x(110).     

Study of thermal currents in powder β-spodumene ceramics doped with Cuo, FeO and TiO2

Ternary-phase ceramic system of Li₂O Al₂O₃ 4SiO₂ doped with CuO, FeO and TiO₂ has been prepared and subjected to dc electrical conductivity and thermally stimulated depolarization current (TSDC) measurements as a function of temperature (30-250 °C) and field strength. The electrical conductivity results are explained by assuming both ionic and electronic conduction mechanisms coexist with different contributions over the whole temperature range of experiments. TSDC spectra have been found to be characterized by a broad intense relaxation peak, which can be attributed to an ionic charge polarization. The broad relaxation transitions are apparently a result of the nonuniform nature of this process. Activation energies are calculated for both dc electrical conductivity and TSDC according to Arrhenius equation and initial rise method, respectively.     

空间遥感相机长条反射镜组件的动力学特性分析

空间遥感相机长条反射镜较圆反射镜的整体刚度相差很大,整个组件在随火箭发射过程中因力学环境引起的自身位置改变导致面形的微小畸变从而对成像质量造成严重影响。因此,反射镜组件的设计就成为整个相机系统研制的重点与难点之一。对其进行科学、严谨的力学环境仿真是设计中的有效辅助手段。对某相机的长条反射镜组件动力学响应进行了较为深入的研究,借助MSC-patran,用有限元法进行了求解。获得了组件的动力学特性。     

Confinement in a planar waveguide with porous silicon omnidirectional mirrors as confining walls

We present the design and study of waveguide structures based on porous silicon where the light confinement is not due to the usual total reflection effect but to the use of photonic crystals (PCs) as confining walls. These PC are omnidirectional mirrors (OMs), consisting of the periodic repetition of two porous silicon layers with different refractive indices and thicknesses. They reflect the radiation for all angles of incidence within a frequency range called the omnidirectional band gap (OBG). We have followed the PC formalism to investigate the properties of the OM as a multimode waveguide: the number of modes within the band gap, their field spatial distribution and their confinement as a function of the frequency and the core thickness.     

微振动光电检测与数据采集系统的设计

提出了一种新的光学非接触式测量方法测量了物体的微振动振幅。用激光作为光源,以四象限硅光电池[1]作为光电探测器,借助三角测量原理,投射在振动源表面的激光反射光束在光电探测器上产生平面位移,将位移信号放大,通过A/D模块采集电压数值,并通过串口通信机制在PC终端实时显示。实验结果表明,该方法原理正确,灵敏度高,便于实现连续、快速、自动化检测,在工业在线检测方面具有良好的应用前景。     

FJZ-250型高速分幅相机时间测量不确定度分析

FJZ-250型高速转镜分幅相机因转镜速度的不可重复性，光机结构的构造原理和控制系统各路高压触发时间的漂移，导致了时间测量的不确定度。为此，须对相机测量数据进行校正。阐述了校正方法、提供了逐幅校正位置误差的修正系数。若以预置转速对应的名义周期值去处理测量结果，则相机的时间测量合成小确定度将达1％，对名义周期值和名义幅间间隔时间值进行修正后，则可降至0.3％。     

非线性光纤环形镜的脉冲透过特性研究

研究了光纤反常色散区非线性环形镜（NOLM）的脉冲透过特性，得到NOLM周期性透过率函数 第一极大值处透过率、压缩比和对应的孤子阶数与环长之间的函数关系图.通过比较长环和 短环NOLM对无啁啾、啁啾脉冲的透过率和压缩比特性，得出了长环有利于脉冲整形而短环有 利于脉冲压缩的结论. 关键词： 非线性环形镜 透过率 压缩比 孤子阶数     

碳纤维增强复合材料反射镜的刚度分析

用有限元法对层合板结构和蜂窝夹层结构的两种复合材料反射镜的刚度进行分析计算,分析是以Ex1522环氧树脂为基体,M60J碳为增强材料的平面反射镜为例进行的,分析包括不同铺层取向、顺序的层合板反射镜自重下的镜面变形;对蜂窝夹层结构反射镜,分别比较了以芳纶纸、玻璃布、耐久铝三种夹层材料的反射镜刚度,对比了碳纤维复合材料、铍金属、微晶玻璃为面板材料的反射镜刚度,讨论了不同蜂窝单元结构形状对反射镜刚度的影响.分析表明,对于以Ex1522环氧树脂为基体,M60J碳为增强材料的平面复合材料反射镜,要使其具有相对稳定的面形,应采用单元形状为正三角形铝蜂窝,前后面板各为12层;90/45/0/－45］3层合板的夹层结构.