Polymerization of 1,3‐dienes with functional groups. III. Free‐radical polymerization of N,N‐diethyl‐2‐methylene‐3‐butenamide

Free‐radical homo‐ and copolymerization behavior of N,N‐diethyl‐2‐methylene‐3‐butenamide (DEA) was investigated. When the monomer was heated in bulk at 60 °C for 25 h without initiator, rubbery, solid gel was formed by the thermal polymerization. No such reaction was observed when the polymerization was carried out in 2 mol/L of benzene solution with with 1 mol % of azobisisobutyronitrile (AIBN) as an initiator. The polymerization rate (R_p) equation was R_p ∝ [DEA]^1.1[AIBN]^0.51, and the overall activation energy of polymerization was calculated 84.1 kJ/mol. The microstructure of the resulting polymer was exclusively a 1,4‐structure where both 1,4‐E and 1,4‐Z structures were included. From the product analysis of the telomerization with tert‐butylmercaptan as a telogen, the modes of monomer addition were estimated to be both 1,4‐ and 4,1‐addition. The copolymerizations of this monomer with styrene and/or chloroprene as comonomers were also carried out in benzene solution at 60 °C. In the copolymerization with styrene, the monomer reactivity ratios obtained were r₁ = 5.83 and r₂ = 0.05, and the Q and e values were Q = 8.4 and e = 0.33, respectively. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 999–1007, 2004     

Structural characterization of polypyrrole in the solid state by high resolution 15N NMR spectroscopy [II]

The solid-state ¹⁵N CP/MAS NMR spectra and ¹⁵N spin-lattice relaxation times (T₁) of doped and dedoped ¹⁵N-labeled polypyrroles prepared by electrochemical polymerization, have been measured by means of high-resolution solid-state ¹⁵N NMR. The ¹⁵N signal of polypyrrole consists of four peaks decomposed by line shape analysis. The four peaks obtained have been assigned to the various structures of polypyrrole. Further, the half-width of the ¹⁵N NMR spectra of polypyrroles is discussed as related to the electrical conductivity. © 1995 John Wiley & Sons, Inc.     

Transition‐metal‐catalyzed reactions of 5‐methylene‐2‐oxazolidinone and 5‐methylene‐1,3‐thiazolidine‐2‐thione with isocyanates

5‐Methylene‐2‐oxazolidinone (1) and 5‐methylene‐1,3‐thiazolidine‐2‐thione (4) react with various isocyanates to give the corresponding urethanes 3 and 5 in high yields in the presence of palladium(0) or palladium(II) catalyst under mild reaction conditions. A mechanism is proposed. Copyright © 2003 John Wiley & Sons, Ltd.     

Acetate-Selective Anion Receptor with Methylene-Bridged Bis-Imidazolium Rings

Methylene-bridged bis-imidazolium receptor 1 has been synthesized. Anion binding studies carried out using ¹H NMR revealed that this compound displayed good affinities for acetate, while binding spherical halide anions weakly.     

Gradient‐enhanced one‐dimensional pulse schemes for quaternary and methylene carbon detection

Gradient‐enhanced pulse schemes are presented for the detection of quaternary and methylene carbons. The new pulse schemes permit the detection of quaternary and methylene (—CH₂) carbons or CH₂ carbons alone from a single experiment. Efficient suppression of CH and CH₃ carbons in all the pulse schemes is achieved by creating their antiphase magnetization and then dephasing using gradients. In the pulse schemes for detection of only CH₂ carbons, the quaternary carbons are also suppressed either by dephasing using gradients or by rendering them unobservable by retaining in longitudinal order. The experimental results of the gradient pulse schemes are demonstrated on cholesteryl acetate and cyclosporin A. These one‐dimensional techniques, because of their simplicity and the ease of performing the experiments, can be important for routine chemical applications. Copyright © 2003 John Wiley & Sons, Ltd.     

Electrical properties of polypyrrole/p‐InP structure

The polypyrrole/p‐InP structure has been fabricated by the electrochemical polymerization of the organic polypyrrole onto the p‐InP substrate. The current–voltage (I–V), capacitance–voltage (C–V), and capacitance–frequency (C–f) characteristics of the PPy/p‐InP structure have been determined at room temperature. The structure showed nonideal I–V behavior with the ideality factor and the barrier height 1.48 and 0.69 eV respectively. C–f measurements of the structure have been carried out using the Schottky capacitance spectroscopy technique and it has been seen that there is a good agreement between the experimental and theoretical values. Also, it has been seen that capacitance almost show a plateau up to a certain value of frequency, after which, the capacitance decreases. The higher values of capacitance at low frequencies were attributed to the excess capacitance resulting from the interface states in equilibrium with the p‐InP that can follow the a.c. signal. The interface state density N_ss and relaxation time τ of the structure were determined from C–f characteristics. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1572–1579, 2006     

Photocatalytic degradation of methylene blue on Fe3+-doped TiO2 nanoparticles under visible light irradiation

Fe³⁺-doped TiO₂ composite nanoparticles with different doping amounts were successfully synthesized using sol-gel method and characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and ultravioletvisible spectroscopy (UV-Vis) diffuse reflectance spectra (DRS). The photocatalytic degradation of methylene blue was used as a model reaction to evaluate the photocatalytic activity of Fe³⁺/TiO₂ nanoparticles under visible light irradiation. The influence of doping amount of Fe³⁺ (ω: 0.00%–3.00%) on photocatalytic activities of TiO₂ was investigated. Results show that the size of Fe³⁺/TiO₂ particles decreases with the increase of the amount of Fe³⁺ and their absorption spectra are broaden and absorption intensities are also increased. Doping Fe³⁺ can control the conversion of TiO₂ from anatase to rutile. The doping amount of Fe³⁺ remarkably affects the activity of the catalyst, and the optimum efficiency occurs at about the doping amount of 0.3%. The appropriate doping of Fe³⁺ can markedly increase the catalytic activity of TiO₂ under visible light irradiation. __________ Translated from Journal of Northwest Normal University (Natural Science), 2006, 42(6): 55–56 [译自: 西北师范大学学报(自然科学版)]     

Unique Reactivity of a Diphenyldisilane Unit Incorporated into the Bicyclic Ring System: Generation of a Disilanyllithium via Silicon-Phenyl Bond Cleavage with Lithium

A bicyclic diphenyldisilane bearing two tetramethylene tethers reacts with lithium to form predominantly the disilanyllithium as a result of Si-C_Ph bond fission, while the pentamethylene homolog undergoes ordinary Si-Si bond cleavage to afford the expected phenylsilyllithium. The compressed Si-Si bond incorporated in the bicyclic ring system may be kinetically stabilized (compression effect), resulting in the unusual Si-C bond fission. When the reaction is carried out in the presence of chlorotrimethylsilane, a Calas-type reaction takes place on the phenyl rings. This result suggests that electron transfer to the phenyl group is the primary process in these bicyclic disilanes, followed by Si-Si or Si-C bond cleavage to afford the corresponding silyllithium species.     

Neue acetonylsubstituierte Azole I. 5-Acetonyl-1,2,4-oxadiazole

Aliphatic amidoximesR—C (NH₂)=NOH react with diketene to yield 5-acetonyl-3-alkyl-1,2,4-oxadiazoles, which are susceptible to a wide variety of reactions at the keto-group as well as at the methylene-group. Their transformations into 1-methyl-2-oxadiazolyl-vinylN,N-dimethylcarbamates, 2-chloro-1-oxadiazolylpropenes, 1-oxadiazolyl-2-(1,2,4-triazol-1-yl)propenes, 1,1-dichloro-1-oxadiazolylacetones and 3-hydroxy-2-oxadiazolyl-crotonic amides are described as well as their reactions with diazonium salts, with sodium nitrite and with carbon disulfide. Further products obtained are carbamates of of 1-oxadiazolyl-2-oxo-propane-1-oximes, 2-chloro-2-oxadiazolylvinyl phosphates and an oxadiazolyl pyrimidine.

Herrn Prof. Dr.Klaus Weissermel zu seinem 60. Geburtstag.     

Triethylborane as an efficient promoter for palladium-catalyzed allylation of active methylene compounds with allyl alcohols

Without prior activation of allyl alcohols, allylation of a variety of active methylene compounds with allyl alcohols proceeds smoothly at rt-50°C in the presence of catalytic amounts of Pd(OAc)₂ (1-10 mol%), Et₃B (30-240 mol%), a phosphine ligand (1-20 mol%), and a base (0 to 50-60 mol%).