光学非球面反射镜轻量化制造技术

新一代的空间相机一般通过采用轻质大尺寸的非球面光学元件来提高系统的成像质量，以降低系统复杂性。而空间相机中的结构件主要是用来支撑和定位主镜，如果主镜制作得更轻，则系统的其它结构将会设计得更加轻巧。受此趋势影响，大口径非球面镜的轻量化问题成为一个研究热点。     

Liquid crystalline epoxy resin with improved thermal conductivity by intermolecular dipole–dipole interactions

To address tremendous needs for developing efficiently heat dissipating materials with lightweights, a series of liquid crystalline epoxy resins (LCEs) are designed and synthesized as thermally conductive matrix. All prepared LCEs possess epoxies at the molecular side positions and cyanobiphenyl mesogenic end groups. Based on several experimental results such as differential scanning calorimetry, polarized optical microscopy, and X‐ray diffraction, it is found that the LCEs exhibited liquid crystalline mesophases. When LCE is cured with a diamine crosslinker, the cured LCE maintains the oriented LC domain formed in the uncured state, ascribing to a presence of dipole–diploe and π–π interactions between cyanobiphenyl mesogenic end groups. Due to the anisotropic molecular orientation, the cured LCE exhibits a high thermal conductivity of 0.46 W m^?1 K^?1, which is higher than those of commercially available crystalline or amorphous epoxy resins. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 708–715     

Domain-Specific On-Device Object Detection Method

Object detection is a significant activity in computer vision, and various approaches have been proposed to detect varied objects using deep neural networks (DNNs). However, because DNNs are computation-intensive, it is difficult to apply them to resource-constrained devices. Here, we propose an on-device object detection method using domain-specific models. In the proposed method, we define object of interest (OOI) groups that contain objects with a high frequency of appearance in specific domains. Compared with the existing DNN model, the layers of the domain-specific models are shallower and narrower, reducing the number of trainable parameters; thus, speeding up the object detection. To ensure a lightweight network design, we combine various network structures to obtain the best-performing lightweight detection model. The experimental results reveal that the size of the proposed lightweight model is 21.7 MB, which is 91.35% and 36.98% smaller than those of YOLOv3-SPP and Tiny-YOLO, respectively. The f-measure achieved on the MS COCO 2017 dataset were 18.3%, 11.9% and 20.3% higher than those of YOLOv3-SPP, Tiny-YOLO and YOLO-Nano, respectively. The results demonstrated that the lightweight model achieved higher efficiency and better performance on non-GPU devices, such as mobile devices and embedded boards, than conventional models.     

轻质建筑中定形相变内隔墙板冬季应用效果研究

现代轻质建筑热容较小,窗墙比较大,冬季在利用透射太阳辐射采暖的同时易造成室内温度波动过大。本文提出将定形相变蓄能板安装在建筑内隔墙表面,以增加建筑热容,减小室温波动。采用经实验验证程序,模拟分析了相变板热物性、表面换热系数和用量对冬季室内温度波动的影响,给出了北京地区相变内隔墙房间的设计原则。     

新型列车侧墙内装板声学分析、优化及应用*

为了开发与应用新型列车车体降噪内装结构,基于混合FE-SEA法对轨道车辆用新型橡胶泡棉夹芯板进行隔声与声辐射预测建模,并进行了试验验证,进而利用该模型分析了橡胶泡棉孔隙率与芯皮厚度比对其隔声性能、声辐射性能的影响规律,并通过敷设阻尼层优化了其声学性能。最后,在侧墙组合结构的声学设计中评价了其实际应用效果。结果表明：随着孔隙率的逐步下降,橡胶泡棉夹芯板隔声量上升趋势较为明显,而辐射声功率持续降低;随着芯皮厚度比的逐步提高,夹芯板隔声量呈略微上升趋势,辐射声功率则相应降低。在远离声源一侧的橡胶泡棉蒙皮外侧敷设阻尼层的效果最优,优化后夹芯板计权隔声量提高0.7dB,总声功率级降低0.7dB;相较于传统木质胶合板和铝蜂窝板,橡胶泡棉夹芯板相较于传统内装板材在结构隔声设计中具有轻量化优势。     

弯曲型Lamb波传播特性与固井质量相关性研究

轻质水泥在油田固井中的广泛应用使得传统测井方式无法有效的对固井水泥胶结质量做出评价。为了研究新的可行的评价方法,本文采用传递矩阵方法对套管中传播的弯曲型Lamb波进行建模,并通过对所建模型进行数值计算研究了套管外水泥等介质的声学参数变化对弯曲型Lamb波衰减率的影响。数值计算的结果表明,弯曲型Lamb波的衰减率与水泥的声学参数以及水泥与套管的胶结状况有较强相关性,据此可对水泥与套管胶结状况进行评价。本文的计算结果与分析对弯曲型Lamb波在水泥胶结评价中的应用具有一定的参考意义。     

商洛钒尾矿烧制轻质高强陶粒的研究

采用80wt;商洛钒尾矿为主要原料,加入钾长石、粘土为辅助原料,以SiC为发泡剂,制备性能优异的轻质高强陶瓷颗粒.采用单因素变量分析法研究钒尾矿含量、SiC添加量、烧成温度和保温时间对陶粒结构及性能的影响.研究结果表明:随着发泡剂SiC含量的增加、烧成温度的提高和保温时间的延长,陶粒的堆积密度和筒压强度均降低,吸水率均升高.最终加入2wt;SiC为发泡剂,在1125℃下保温30min制得堆积密度631kg/m3,筒压强度9.1MPa,吸水率3.1;的轻质高强陶瓷颗粒.     

Ni-Co/W型钡铁氧体双层空心微珠的制备及电磁性能的研究

用超声波化学镀工艺在W型钡铁氧体空心微珠表面沉积Ni-Co合金,制备了一种新型轻质吸波材料Ni-Co/W型钡铁氧体双层空心微珠(Ni-Co/W-Ba).运用扫描电镜、能谱分析和网络矢量分析仪研究了不同Ni2+/Co2+比对Ni-Co/W-Ba空心微珠的表面形貌、组成成分、沉积速率及电磁性能的影响.结果表明:Ni-Co合金颗粒首先在W-Ba空心微珠六角片状晶的间隙和沟壑中沉积,当填充完后开始在基体表面沉积直至完全包覆;化学镀液中Ni2+/Co2+比的不同导致Ni-Co合金沉积速度不同,其中Ni2+/Co2+比为4/0时沉积速度最快;完全包覆后的Ni-Co/W-Ba双层空心微珠的电磁吸波性能明显增强,小于-10 dB的有效吸波带宽由未镀Ni-Co合金前的不足l GHz拓宽至镀后的9.4 GHz.     

快反系统中平面反射镜的轻量化设计

根据快速控制反射镜系统(快反系统)对平面反射镜的设计要求,对快反镜的轻量化结构进行了优化设计。选择比刚度大、热变形系数小的碳化硅为镜坯材料,采用背部开槽式结构减重,背部3点式支撑,对不同筋宽和镜面厚度等多种轻量化方案进行了有限元分析。结果表明:筋宽越大,镜体刚度越好,但筋宽增大到一定程度时,反射镜刚度的改善程度减缓;镜面越厚,镜体内应力、自重变形越大。结合反射镜设计要求和有限元分析结果,加工制备了筋宽为4 mm,镜面厚度为4 mm的碳化硅反射镜,镜体轻量化率达55%。实测反射镜的面形精度,其RMS值不超过λ/30,与分析结果相符,满足系统的使用要求。