Hydrothermal synthesis of potassium molybdenum oxide bronzes: structure-inheriting solid-state route to blue bronze and dissolution/deposition route to red bronze

The hydrothermal syntheses of the alkali metal molybdenum bronzes from starting solids (H_xMoO₃) with structural affinities to the desired products were investigated. Single-phase potassium blue and red bronzes were prepared by the hydrothermal treatments at around 430 K, and characterized by powder X-ray diffraction, IR spectroscopy, and SEM. The formation processes of these two bronzes during the hydrothermal treatments were found to differ. The blue bronze was formed by a structure-inheriting solid-state route from H_xMoO₃ with x<0.3, whereas the red bronze was formed for x>0.3 through a solution dissolution/deposition route via the formation of MoO₃+MoO₂.     

Magnetic Structure of CsPd2F5

The structure of CsPd₂F₅ has been confirmed from neutron diffraction data on powdered sample. CsPd₂F₅ crystallizes in the orthorhombic Imma space group. At 100 K, the unit-cell constants are a = 6.473(2) Å, b = 7.853(5) Å, c = 10.718(3) Å and the calculation carried out using the Rietveld method leads to R₁ = 0.020. The network is formed of PdF₆ octahedra chains containing half of Pd in high-spin configuration, connected one to each other by square planes containing the other half of Pd in low-spin configuration. CsPd₂F₅ orders antiferromagnetically below T_N = 38 K. In the ordered state a weak ferromagnetic component occurs (σ₀ = 0.098 μ_B at 2 K). The magnetic structure determined at 4 K is consistent with the magnetization data and can be described in the Im′m′a′ magnetic group without any doubling of the unit-cell parameters. Within the chains, Pd²⁺ are coupled antiparallel. The magnetic moments are located in the (x0z) plane, the angle between the moments and the z axis being 18°.     

Rare earth tungsten bronzes: a new method of synthesis. Perspectives for their application as inert matrices for transmutation of long-life actinide elements

A new method of synthesis of oxide tungsten bronzes containing lanthanide (Ln) Nd and Eu, based on thermal degradation of polyoxotungstate compounds, is proposed. The simplicity of the method allows to consider this class of compounds with chemical formula, Ln_xWO₃, as potential inert target for incineration or transmutation of minor actinides, Am and Cm, in neutron reactors. Nd and Eu were used as analogues of transplutonium elements. Powder X-ray diffraction patterns of compounds synthesized reveal a cubic perovskite structure. The lanthanide content in bronzes was determined by optical spectroscopy analysis. The experimental density of the pressed bronze samples was estimated at 6.58 g cm⁻³, i.e., 89% of the crystallographic value. The thermal stability of the bronzes synthesized was checked up to 900°C in an inert atmosphere. Leaching tests were performed for europium bronzes in nitric acid solutions using luminescence technique.     

Ternary and tetrahedral symmetry in hybrid fluorides, fluoride carbonates and carbonates

Tren amine cations and carbonate anions adopt a ternary symmetry while tetra amine cations are tetrahedral. The symmetry of these constitutive ions influences strongly the nature of the solids which crystallise from solutions. Large fluorinated aluminate polyanions with tetrahedral symmetry appear in the presence of tren amine, while infinite chains of AlF₆ octahedra are observed with tetra amine and that noncentrosymmetric structures are frequently encountered in rare earth fluoride carbonates.     

New class of coordination compounds with noble gas fluorides as ligands to metal ions

A new class of coordination compounds of the type [Mⁿ⁺(L)_p](AF₆⁻)_n and [Mⁿ⁺(L)_r](BF₄⁻)_n, where M is Mg, Ca, Sr, Ba, Cd, Pb, lanthanides, A is P, As, Sb, Bi and L is XeF₂, XeF₄, XeF₆, KrF₂, was studied. A review of all known coordination compounds with L is XeF₂ is given: (a) synthetic routes for the preparation of these compounds; (b) analysis of their crystal structures (molecular, dimer, chain, double chain, layer, strongly interconnected double layers and three-dimensional network); (c) the influence of the ligand XeF₂ (small formula volume, linear, semi-ionic, charge of −0.5e on each F ligand); (d) the influence of the central metal ion; (e) the influence of the anions: AF₆⁻ and BF₄⁻ (the formula volume, Lewis basicity). On the basis of all properties of the metal ions, ligand and anions the obtained variety of the structures is analyzed.     

Solubilities of lanthanum oxide in fluoride melts: Part I. Solubility in M3AlF6 (M = Li, Na, K)

Solubility of lanthanum oxide was measured by thermal analysis. The solubility in alkali cryolites is rather high, because of chemical reactions between lanthanum oxide and cryolites. In Li₃AlF₆-La₂O₃, alumina precipitates, in the other systems the mixed oxide LaAlO₃ is formed. In La₂O₃-Li₃AlF₆ the eutectic point is at 9.5 mol% La₂O₃ and 755 °C. The eutectic points in La₂O₃-Na₃AlF₆ and La₂O₃-K₃AlF₆ are at 11.5 mol% La₂O₃, and at 937 and 934 °C, respectively.     

Simons electrochemical fluorination of substituted homopiperazines(hexahydro-1,4-diazepines) and piperazines

Simons electrochemical fluorination (ECF) of 1,4-dimethyl-1,4-homopiperazine, methyl 4-ethylhomopiperazin-1-ylacetate and 1,4-bis(methoxycarbonylmethyl)-1,4-homopiperazine was studied. For comparison, ECF of three piperazines with a N-(methoxycarbonylmethyl) group(s) was also studied. ECF of 1,4-dimethyl-1,4-homopiperazine gave a low yield of corresponding perfluoro(1,4-dimethyl-1,4-homopiperazine) together with perfluoro(2,6-diaza-2,6-dimethylheptane) as the major product. Corresponding perfluoro(homopiperazines) with mono- and/or di-(fluorocarbonyldifluoromethyl) groups [CF₂C(O)F] at the 1- and/or 4-position were formed in low yields from methyl 4-ethylhomopiperazin-1-ylacetate and 1,4-bis(methoxycarbonylmethyl)-1,4-homopiperazine, respectively. These new seven-membered perfluoro(1,4-dialkyl-1,4-homopiperazines) were accompanied by the formation of mono- and/or di-basic linear perfluoroacid fluorides resulting from the CC bond scission at the 2- and 3-positions of the ring. From mono- and/or di-N-(methoxycarbonylmethyl)-substituted piperazines, corresponding perfluoropeperazines having the acid fluoride group(s) were formed in low yields.     

Complex copper(II) fluorides. XV. The Ternary System BaF2?CuF2?ScF3

The liquid-solid phase diagram of the binary system BaF₂? ScF₃ is established by D.T.A. and radiocrystallography. Three fluorides are disclosed: Ba₃Sc₂F₁₂, Ba₅Sc₃F₁₉ and a cubic high temperature phase Ba_1?xSc_xF_2+x (x = 0.17), the structure of which derives from that of BaF₂. A solid solution between BaF₂ and ScF₃ is also evidenced at high temperature. The ternary system BaF₂? CuF₂? ScF₃ is investigated by radiocrystallography and an isothermal section at 670°C is given. It shows the existence of four phases: a complex quaternary fluoride Ba₁₀Cu₁₂ScF₄₇, two “polytypic” phases the structure of which derives from that of BaCuF₄ and a tetragonal solid solution Ba₅Sc_3?xCu_xF_19?x with 0 ≤ x ≤ 1.     

Conservation of [(C2H4NH3)3N]2·(ZrF7)2·H2O layers during the topotactic dehydration of [(C2H4NH3)3N]2·(ZrF7)2·9H2O

Tren amine cations [(C₂H₄NH₃)₃N]³⁺ and zirconate or tantalate anions adopt a ternary symmetry in two hydrates, [H₃tren]₂·(ZrF₇)₂·9H₂O and [H₃tren]₆·(ZrF₇)₂·(TaOF₆)₄·3H₂O, which crystallise in R32 space group with a_H = 8.871 (2) Å, c_H = 38.16 (1) Å and a_H = 8.758 (2) Å, c_H = 30.112 (9) Å, respectively. Similar [H₃tren]₂·(MX₇)₂·H₂O (M = Zr, Ta; X = F, O) sheets are found in both structures; they are separated by a water layer (O_w(2)-O_w(3)) in [H₃tren]₂·(ZrF₇)₂·9H₂O. Dehydration of [H₃tren]₂·(ZrF₇)₂·9H₂O starts at room temperature and ends at 90 °C to give [H₃tren]₂·(ZrF₇)₂·H₂O. [H₃tren]₂·(ZrF₇)₂·H₂O layers remain probably unchanged during this dehydration and the existence of one intermediate [H₃tren]₂·(ZrF₇)₂·3H₂O hydrate is assumed. O_w(1) molecules are tightly hydrogen bonded with -NH₃⁺ groups and decomposition of [H₃tren]₂·(ZrF₇)₂·H₂O occurs from 210 °C to 500 °C to give successively [H₃tren]₂·(ZrF₆)·(Zr₂F₁₂) (285 °C), an intermediate unknown phase (320 °C) and ZrF₄.