斜孔气膜冷却数值模拟分析

本文通过数值模拟分析圆柱孔和扩散孔的单斜孔气膜冷却特性,考察复合角、孔型和吹风比对流场和气膜冷却效果的影响。结果表明,复合角的引入使气膜侧向分布更宽,但冷却效果沿主流方向衰减更快。适中吹风比得到的气膜能更有效的保护壁面。在相同吹风比和复合角条件下,扩散孔的气膜冷却效率比圆柱孔更好,且冷却更为均匀持久。     

Analysis of Static Simulated Annealing Algorithms

Generalized hill climbing (GHC) algorithms provide a framework for modeling local search algorithms to address intractable discrete optimization problems. This paper introduces a measure for determining the expected number of iterations to visit a predetermined objective function level, given that an inferior objective function level has been reached in a finite number of iterations. A variation of simulated annealing (SA), termed static simulated annealing (S²A), is analyzed using this measure. S²A uses a fixed cooling schedule during the algorithm execution. Though S²A is probably nonconvergent, its finite-time performance can be assessed using the finite-time performance measure defined in this paper.     

Production of carbon soot with a high content of C60 and C70 fullerenes by electric arc

The effect of the parameters of the electric arc (helium pressure, current and voltage, clearance between electrodes) and of the peculiarities of the setup design (arrangement of electrodes, distance between the arc and the cooling surface, temperature of the soot condensation surface) on the yield of fullerenes has been studied. Conditions for producing soot with a C₆₀ and C₇₀ content up to 43% (toluene extract) have been found.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 805–809, May, 1994.The authors are grateful to N. G. Spitsyna and A. V. Dubovitskii for the determination of the content of C₆₀ and C₇₀ fullerenes in the extract.The work was financially supported by the Russian Foundation for Basic Research (Project 93-03-18705).     

Slow quenching for a one-dimensional kinetic Ising model: Residual energy and domain growth

A one-dimensional kinetic Ising model with Glauber dynamics subjected to a slow continuous quench to zero temperature is studied. For a rather general class of cooling schemes, described by a time-dependent temperatureT(t), the mean domain sizeL(t) is calculated along with the residual energye _res (r) as a function of the cooling rater. If the attempt frequency =₀ exp(–/kT), entering into the transition rates, is temperature dependent (i.e., the barrier is non-zero), the asymptotic growth ofL(t) is given byL()–L(t)~exp[–/kT(t)]. For this case the residual energy exhibits a power-law behaviore _res(r) ~r ^{/2(1 + )} forr small, where =4J/ andJ is the nearest neighbor coupling constant. For =0 and for certain cooling schemes the residual energy is zero andL(t)~t1/2, independent ofr.     

Evaluation of the calibration errors on cooling of a differential scanning calorimeter using different sets of standard metals

The temperature calibration on cooling of thermal analysis instruments is important for the accurate study of the non-isothermal crystallization kinetics of semi-crystalline polymers. In previous works, a methodology was proposed for performing the calibration on cooling of differential scanning calorimeters (DSCs) with standard metals, and the calibration errors were checked using transitions of high-purity liquid crystals. In this work, alternative, physically meaningful, procedures for carrying out the calibration on cooling are analyzed and validated. The calibration errors are evaluated also with liquid crystalline transitions, when the calibration is performed with standard metals, in a wide temperature range, and when due account is taken for the need of isothermal corrections to the temperature measurements. It is shown that any pair of standard metals may be used to calibrate on cooling, that the calibration errors increase for wider working temperature ranges and that, providing that certain conditions are fulfilled, both calibration procedures yield similar results.     

Technological quality determination of pharmaceutical disintegrant by DSC cooling and DSC photovisual

A number of disintegrants are available on the market. They improve tablets’ disintegration. The objective of this work is the comparison of the technological quality parameters of disintegrants using different analytical techniques. Three batches of disintegrants and their binary mixtures (water:disintegrants) were investigated. Cooling experiments were used from –30 up to 200°C. The data obtained showed calorimetric differences between the samples. In the binary mixtures water showed different crystallization behaviour from the one found in the literature. According to the results DSC technique helped the quality control of different disintegrants.     

涡轮叶栅前缘槽缝气膜冷却的数值模拟

应用FINE/TURBO软件包,求解三维雷诺平均N-S方程,对叶片前缘有两列冷却槽缝的气膜冷却流场进行了数值模拟,获得了不同吹风比下叶片表面静压分布与极限流线.在计算结果与实验数据良好符合的基础上,详细分析了槽缝冷却三维定常流场结构与槽缝附近的流动细节.研究结果表明,槽缝冷却对前缘压力分布影响较大,且在压力面引起较大的分离流动,不利于冷却.     

凹槽叶顶冷气射流对涡轮叶尖泄漏流动的影响

涡轮叶尖泄漏流动对涡轮通道内流动损失有着显著影响,叶顶冷气射流对控制叶尖泄漏流动和改善涡轮叶尖气热性能有重要意义.本文利用数值模拟方法,研究了叶顶冷气喷射位置和喷射流量对高压涡轮凹槽叶顶间隙泄漏流动控制的影响.文中重点分析了泄漏流动结构及涡轮气动效率的变化,探讨了冷气对刮削涡这一间隙内主控流动结构演化的影响.研究表明,...     

不同进风型式下气体冷却服中空气流动与换热的研究

根据气体冷却服的特点,对不同进风型式下气体冷却服中空气流动与换热进行研究。建立了进气口加设挡板层、进气口带均流器型和直吹型3种型式气体冷却服(服装夹层)中冷却空气流动过程的数学模型。对气体的流动过程进行分析,结果表明:不同的进风型式对气体冷却服空气层的温度分布状况、平均气流流速、平均温度、对流散热量影响较大;其中进气口加设挡板层的服装空气夹层温度分布最均匀,进气直吹型的平均气流流速最大,对流散热效果最好。研究结果为气体冷却服进一步的布风优化设计提供了理论和应用依据。