Duane模型在斯特林制冷机研制过程中的应用

介绍一种实用的可靠性增长模型杜安 (Duane)模型 ,并探讨如何运用该模型来分析、指导斯特林制冷机的可靠性增长试验 ,包括试验前的准备、试验数据的处理、曲线的绘制 ,以及如何对增长过程进行估计和监测     

SYNTHESIS, CHARACTERIZATION, METAL-UPTAKE BEHAVIOR OF BIS（BENZIMIDAZOLE） RESIN SUPPORTED ON EPOXIDE POLYMER

The new chelate resins, abbreviated as PNBMZs and PBBMZs based on epoxide polymer, were synthesized by polycondensation of N,N-diglycidyl-4-glycidyloxyaniline or 1,4-bis（2,3-epoxypropyl）benzene with the primary amine group of 1,3-bis（benzimidazol-2yl）propylamine （BBPAH）. The ion exchangers contain 2.71-3.23 mmol of the ligand contents per gram of the resin. Batch extraction capacities were determined for the metal chloride salts in buffer solutions in the pH range from -1 to 6.0. The chelate resins were very selective for Cu^2＋, Zn^2＋, Cd^2＋ in the presence of other divalent transition metal ions. The maximum uptake capacities of PNBMZ （synthetic molar ratio = 1：1.5） under non-competitive condition were found to be 0.94 mmol/g for Cu^2＋ at pH = 2, 1.3 mmol/g for Cd^2＋ at pH = 1 and 1.75 mmol/g for Zn^2＋ at pH = -1 respectively. While in the case of PBBMZ, it was 1.39 mmol/g for Cd〉 at pH = 1. The metal-uptake behaviors for both of them showed strong pH dependence, and their extraction capacities increase with decreasing pH. The uptake of Cu^2＋ by the resin PNBMZs at pH = 1 was found to be rather fast with t1/2 = 18 min. Metal-uptake experiments under competitive conditions also confirm that the chelate resins have a high selectivity for Cu^2＋, Zn^2＋, Cd^2＋ and the contrary pH dependence.     

Optically clear simultaneous interpenetrating polymer networks based on poly(ethylene glycol) diacrylate and epoxy. I. Preparation and characterization

Poly(ethylene glycol) diacrylate was synthesized from poly(ethylene glycol) of molecular weight 600 with acryloyl chloride in a molar ratio of 1:2. Poly(ethylene glycol) diacrylate (PEGDA) was then blended with diglycidyl ether of bisphenol A (DGEBA) in various ratios, followed by curing with 2,2′-azobisisobutyronitrile (AIBN) and isophronediamine (IPDA) simultaneously. Viscosity changes before and during IPN formation were examined with a Brookfield viscometer. Formation of H-bonding and functional group changes were investigated with FTIR. Exothermic curing thermograms were recorded with dynamic DSC. Optically clear IPNs thus obtained were characterized with rheometric dynamic spectroscopy (RDS) and scanning electron microscopy (SEM) to check possible compatibility of the two networks. Experimental results revealed that during IPN formation hydrogen bonds between PEGDA and DGEBA and interlock of networks had profound effect on viscosity change and pot-life. Complete compatibility of the IPNs was found as DGEBA content was higher than 50% by weight. The compatibility between PEGDA and DGEBA networks was evidenced from inner shift of a single damping peak in RDS. In the meantime, SEM micrographs confirmed the coincidence with the result of RDS © 1992 John Wiley &Sons, Inc.     

STUDY ON THE PROPERTIES OF BLEND OF NATURAL RUBBER LATEX/METHYL METHACRYLATE GRAFTED RUBBER LATEX BY GAMMA RADIATION

Natural rubber latex(NRL)and methyl methacrylate(MMA)grafted rubber latex were blended in different ratios and irradiated at various absorbed doses by gamma rays from Co-60 source at room temperature.The tensile properties, swelling ratio and permanent set were measured.The maximum tensile strength and modulus at 500% elongation were obtained at an absorbed dose of 8 kGy.Modulus increases from 6.99 MPa to 9.87 MPa for an increase in proportion of MMA grafted rubber from 40% to 60% in the blend at similar absorbed dose.Elongation at break and swelling ratio decrease with increasing absorbed dose as well as the MMA grafted rubber content in the blends.The decreasing trend of permanent set is high up to 5 kGy absorbed dose,and beyond that dose,it becomes almost flat.     

Strongly nonlinear luminescence in oxidized porous silicon films

Partially oxidized free-standing porous silicon films show a strongly superlinear increase in photoluminescence (PL) intensity above a threshold cw excitation intensity of 10 W/cm². The PL-intensity increase can be expressed by a power law with n9 as a function of the excitation intensity. The PL-peak wavelength of this emission is slightly redshifted from that at low-excitation levels. These changes are fully reversible and reproducible, but not observed in samples on substrate. We attribute this behavior to thermal reexcitation of carriers trapped at the dangling bond states in initially nonluminescent Si nanocrystallites.     

Lipase-mediated deracemization of secondary 1-phenyl-substituted propargylic alcohols of different topology

Acetylation of (±)-1-phenylnon-2-yn-1-ol, (±)-1-phenylhept-1-yn-3-ol, and (±)-1-phenylundec-4-yn-3-ol ((±)-5) in the presence of lipase from Candida cylindracea (CCL) proceeds slowly to give products with ee 20%. The acetates of these alcohols are hydrolyzed in the presence of porcine pancreatic lipase (PPL) equally unsatisfactorily. The (⁶-arene)tricarbonylchromium complex of alcohol (±)-5 is acetylated in the presence of CCL up to 22% conversion to give (R)-acetate whose oxidative decomplexation followed by saponification results in alcohol (R)-(–)-5 with ee 95%. The configuration of alcohols (–)-5 and (+)-5 was determined by NMR spectroscopy of their esters with (R)- and (S)-Mosher"s acids.     

Changes in the Seam-Filtration Mode with Stress Redistribution in Country Rock

A mathematical model for the mechanism of increasing oil output of productive seams is developed. The model involves a deliberate conversion of segments of the fault zone of the country rock to a supercritical state, which leads to a local redistribution of stresses in the block massif of rocks and an increase in contour and seam pressures. Based on solving the problem of restricted filtration, it is shown that the use of the proposed mechanism can ensure a relative increase in well production of 5–8%.     

Asymptotic distribution of the increase of the largest canonical correlation when one of the vectors is augmented

Let r₁ > r₂ > … be the sample canonical correlations in a sample of size n from a multivariate normal population partitioned into two subvectors with population canonical correlations ₁ > ₂ > …. Let one of the subvectors be augmented by adding one or more variables to it. For the increase in the largest canonical correlation, Δr in the sample and Δ in the population, it is shown that √n(Δr − Δ) → ^DN(0, σ²) and a formula for σ² is derived.     

New epoxy thermosets modified with hyperbranched poly(ester-amide) of different molecular weight

The influence of hydroxy-functionalized hyperbranched poly(ester-amide) (HBP) of different molecular weight on the curing process of diglycidylether of bisphenol A (DGEBA) was studied using methyltetrahydrophthalic anhydride (MTHPA) as curing agent. By Differential Scanning Calorimetry (DSC) and Fourier Transform Infrared Spectroscopy (FTIR) the curing reaction was monitored and the covalent incorporation of the modifier in the matrix was proved. By thermomechanical analysis (TMA) the reduction of the contraction after gelation on changing the HBP proportion was observed. The incorporation of HBP increased the glass transition temperature (T_g) and reduced the overall shrinkage. The modified materials showed a higher thermal degradability than neat DGEBA thermosets allowing reworkability. Thermal expansion coefficient, Young’s modulus, impact strength and microhardness were improved. The water uptake behavior was also evaluated.