Plasmon Coupling-Induced Hot Electrons for Photocatalytic Hydrogen Generation

We present the fabrication of core-shell-satellite Au@SiO₂-Pt nanostructures and demonstrate that LSPR excitation of the core Au nanoparticle can induce plasmon coupling effect to initiate photocatalytic hydrogen generation from decomposition of formic acid. Further studies suggest that the plasmon coupling effect induces a strong local electric field between the Au core and Pt nanoparticles on the SiO₂ shell, which enables creation of hot electrons on the non-plasmonic-active Pt nanoparticles to participate hydrogen evolution reaction on the Pt surface. In addition, small SiO₂ shell thickness is required in order to obtain a strong plamon coupling effect and achieve efficient photocatalytic activities for hydrogen generation.     

Evaluation of Charged Defect Energy in Two-Dimensional Semiconductors for Nanoelectronics: The WLZ Extrapolation Method

Defects play a central role in controlling the electronic properties of two-dimensional (2D) materials and realizing the industrialization of 2D electronics. However, the evaluation of charged defects in 2D materials within first-principles calculation is very challenging and has triggered a recent development of the WLZ (Wang, Li, Zhang) extrapolation method. This method lays the foundation of the theoretical evaluation of energies of charged defects in 2D materials within the first-principles framework. Herein, the vital role of defects for advancing 2D electronics is discussed, followed by an introduction of the fundamentals of the WLZ extrapolation method. The ionization energies (IEs) obtained by this method for defects in various 2D semiconductors are then reviewed and summarized. Finally, the unique defect physics in 2D dimensions including the dielectric environment effects, defect ionization process, and carrier transport mechanism captured with the WLZ extrapolation method are presented. As an efficient and reasonable evaluation of charged defects in 2D materials for nanoelectronics and other emerging applications, this work can be of benefit to the community.     

Energy Spectrum Width and Nonequilibrium Energy of Rayleigh Waves Scattered on a Two-Dimensional Near-Surface Electron Layer

We obtain expressions for the energy spectrum widths of Rayleigh waves corresponding to their deformational coupling to Fermi and Boltzmann electrons in a two-dimensional layer near the surface of a semibounded solid. We evaluate the nonequilibrium energy of Rayleigh waves that depends on these widths and is caused by the same coupling to the corresponding hot electrons. We show that this energy is independent of the degeneracy degree of the electrons and is given by the mean energy of free Rayleigh waves heated up to temperature of the electrons. We find conditions under which the thermodynamics is determined by this nonequilibrium energy of Rayleigh waves in films of a certain thickness with Fermi electrons near the surface and by the equilibrium energy of bulk phonons in thicker samples. All the results are obtained using the Keldysh diagram technique applied to the case of semibounded media.     

Nickel Chloride Promoted Glaser Coupling Reaction in Hot Water

A Glaser coupling reaction of terminal alkynes in the presence of nickel chloride withoutany organics and bases in hot water has been developed, which produces the correspondinghomo-coupling products in good yields.     

四（对-羟基苯基）卟啉氧合配合物的室温固相合成，表征及氧合能力

采用固相反应合成了四羟基苯基卟啉与与Fe^2＋,Co^2＋金属离子的配合物,在室温下,将其与分子O2作用,提纯后得到两种固态氧合配合物．通过元素分析、红外光谱（IR）、核磁共振氢谱（^1HNMR）、电导、热分析（TG／DTA）、紫外光谱（UV）等测试手段确定了氧合配合物的组成为[Co·THPP·O2]（NO3）2·2H2O、[Fe·THPP·O2]Cl2·2H2O]，可知1mol配合物吸收了1molO2,采用失重法测定了氧合配合物中的配位氧,确定1mol金属配合物吸收1molO2形成超氧配合物．     

Ultrafast carrier dynamics in ferromagnetic InGaMnAs

We have carried out an ultrafast time-resolved differential reflectivity study of a ferromagnetic semiconductor InGaMnAs and made a systematic comparison with low-temperature grown and high-temperature grown InGaAs reference films. Very short carrier lifetimes (2 ps) were observed in InGaMnAs and the low-temperature grown InGaAs film, but not in the high-temperature grown InGaAs film. We attribute the short lifetimes to carrier trapping by mid-gap states introduced during low-temperature MBE growth. Furthermore, at long times, we observed periodic oscillations in the differential reflectivity signal with period 20 ps, which we interpret as coherent acoustic phonons.     

Nuclear Excitation by X-Ray Emission of Femtosecond Laser Plasma

The proposed model of laser plasma emission spectrum formation enables us to determine the absolute value of the laser pulse to plasma emitted radiation conversion factor, profile of the emission spectrum, and frequency distribution of the intensity and energy in the emitted spectra. This is of interest for laser plasma diagnostics and provides a means for direct calculation of the number of excited nuclei in dependent on the parameters of laser pulse. This revised version was published online in August 2006 with corrections to the Cover Date.     

应变Si1-xGex层中p型杂质电离常温和低温特性

本文采用解析的方法计算了应变Si1-xGex层中p型杂质电离度与Ge组分x、温度T以及掺杂浓度N的关系.发现常温时,在同一Ge组分下,随着掺杂浓度的升高,杂质的电离度的先变小,而后又迅速上升到1.在同一掺杂浓度下,轻掺杂时,杂质的电离度随Ge组分的增加先变大,而后几乎不变;重掺杂时,杂质电离能变为0后,杂质电离度为1.低温下,轻掺杂时,载流子低温冻析效应较为明显,杂质的电离度普遍较小,当掺杂浓度大于Mott转换点时,载流子冻析效应不再明显,电离率迅速上升到1.在同一Ge组分下,随着掺杂浓度的升高,杂质的电离度先变小,后变大,而后又迅速上升到1.在同一掺杂浓度下,轻掺杂时,杂质的电离度随Ge组分的增加变大;重掺杂时,杂质电离能变为0后,杂质电离度为1.     

Succinic acid adsorption from fermentation broth and regeneration

More than 25 sorbents were tested for uptake of succinic acid from aqueous solutions. The best resins were then tested for successive loading and regeneration using hotwater. The key desired properties for an ideal sorbent are high capacity, complete stable regenerability, and specificity for the product. The best resins have a stable capacity of about 0.06 g of succinic acid/g of resin at moderate concentrations (1–5 g/L) of succinic acid. Several sorbents were tested more exhaustively for uptake of succinic acid and for successive loading and regeneration using hot water. One resin, XUS 40285, has a good stable isotherm capacity, prefers succinate over glucose, and has good capacities at both acidic and neutral pH. Succinic acid was removed from simulated media containing salts, succinic acid, acetic acid, and sugar using a packed column of sorbent resin, XUS 40285. The fermentation byproduct, acetate, was completely separated from succinate. A simple hot water regeneration successfully concentrated succinate from 10 g/L (inlet) to 40–110 g/L in the effluent. If successful, this would lower separation costs by reducing the need for chemicals for the initial purification step. Despie promising initial results of good capacity (0.06 g of succinic/g of sorbent), 70% recovery using hot water, and a recovered concentration of >100 g/L, this regeneration was not stable over 10 cycles in the column. Alternative regeneration schemes using acid and base were examined. Two (XUS 40285 and XFS-40422) showed both good stable capacities for succinic acid over 10 cycles and >95% recovery in a batch operation using a modified extraction procedure combining acid and hot water washes. These resins showed comparable results with actual broth.     

Equilibrium State of Inhomogeneous Plasma

We consider the problem of a self-consistent determination of an essentially inhomogeneous equilibrium state of classical plasma. The solutions of the stationary Vlasov–Poisson equations are constructed in the form of a localized transition layer that separates the domains of homogeneous plasmas with different equilibrium parameters. The layer can also transform into a local perturbation inside a homogeneous plasma. In both cases, the solution contains neither mass currents nor electric currents, and all electrodynamic and hydrodynamic quantities and their derivatives are continuous. The parameters of the adjacent domains uniquely determine the transition layer structure.