CONCEPTUAL DESIGN STUDIES OF AN 84 GHz, 500 kW, CW GYROTRON

The feasibility of an 84 GHz, 500 kW, CW gyrotron for ECRH on an experimental tokamak will be presented in this paper. Mode competition and mode selection procedures are carefully investigated by considering various candidate modes and the TE_10,4 mode is chosen as the operating mode. A conventional cylindrical cavity resonator with weak input and output tapers and parabolic roundings is considered for interaction studies. Self-consistent, both single mode and time-dependent, calculations are carried out and power and efficiencies are computed for a typical set of beam parameters. The results show that an output power of well over 500 kW, CW and efficiency around 40% can be reached without a depressed collector.     

Rapid and efficient synthesis of optically active pyrazoles under solvent-free conditions

2-Formyl glycals undergo rapid condensation with arylhydrazines under solvent-free conditions to give the corresponding optically pure 4-substituted pyrazoles in good yields with high selectivity. The stereochemistry of the products was assigned by various NMR experiments.     

Microwave Activation of Processes in Mesopores: The Thiourea Electrooxidation at Mesoporous Platinum

In situ microwave activation is applied to the electrochemical oxidation of thiourea at low surface area (polished polycrystalline) and at high surface area (electrodeposited mesoporous platinum coated) platinum microelectrodes. The one electron oxidation of thiourea to formamidine disulfide is monitored as a function of the different activation parameters. In the absence of microwaves (ambient temperature, low mass transport) increasing the surface area (roughness) increases the thiourea oxidation response predominantly due to adsorption effects. In the presence of high microwave intensities, high mass transport and thermal effects further increase the oxidation current at mesoporous platinum. The most effective thickness of the mesoporous platinum film for the thiourea oxidation process is estimated as 3 μm independent of electrode diameter, temperature, or mass transport effects.     

New pyrrole-based amino acids for the synthesis of peptidomimetic constrained scaffolds

A new family of pyrrole-based amino acids have been prepared through the microwave assisted Paal-Knorr reaction of 1-4 ketoesters derived from the corresponding β-ketoester with a functional homologation. The carboxylic group is located in position 3 of the pyrrole, whereas the amino group, protected with the Cbz moiety, is present on the side chain in positions 1 or 2. These compounds were used to prepare constrained oligopeptides.     

Thiourea to bicyclic scaffolds: highly regio- and stereoselective routes to dithiazolopyrimidines

Microwave-activated solvent-free Michael addition of 3-imino-1,4,2-dithiazoles to 4-arylidene-5(4H)-oxazolones furnished isolable adducts regio- and diastereoselectively, which underwent ring transformation to yield the target dithiazolopyrimidines. Alternatively, the similar conjugate addition of methanesulfinylmethylisothioureas to 4-arylidene-5(4H)-oxazolones diastereoselectively afforded Michael adducts, which underwent ring transformation followed by heterocyclization via deoxygenative demethylation with thionyl chloride to yield the same products dithiazolopyrimidines regio- and diastereoselectively.     

Microwave-assisted cleavage of Weinreb amide for carboxylate protection in the synthesis of a (R)-3-hydroxyalkanoic acid

A versatile route for the modular synthesis of (R)-3-hydroxyalkanoic acids, constituents of the naturally biodegradable poly(3-hydroxyalkanoate) polymers, and its application to the synthesis of (R)-3-hydroxydecanoic acid is described. Key steps include a microwave-assisted catalytic transfer hydrogenation and a facile microwave-assisted hydrolysis of an N-methoxy-N-methyl (Weinreb) amide, which enhances the practicality of this protecting group for carboxylic acids.     

92单元三角栅格径向线子阵馈电系统的设计和实验研究

以探索更多单元数的三角形栅格径向线子阵馈电系统为目的,对92单元子阵馈电系统进行了研究,提出了一种新型耦合探针,以满足馈电系统对耦合量及幅频特性的要求。对馈电系统微波能量不均匀分布引起的探针难以实现耦合量的等幅输出问题进行了分析,并给出了相应的解决方案。实验测试结果表明：馈电系统在中心频率2.856 GHz处,驻波系数为1.1,各探针耦合量实现了近似等幅馈电;在2.76~2.92 GHz带宽范围内,驻波系数小于1.5,各输出端口的幅频特性一致性较好。实验测试结果与仿真设计结果基本相符。     

激光加载下铝材料的冲击温度测量

利用神光Ⅱ装置上搭建的用于激光冲击波实验的温度诊断系统（该系统包括高时空分辨的扫描高温计和谱时分辨的扫描高温计）,以强激光加载铝材料冲击温度的测量,获得了铝材料冲击高温辐射发光谱的高时空分辨信号图像,结合灰体辐射理论模型,计算得到了冲击波速度19.06 km/s时铝材料的冲击温度达2.95 eV,该温度与SESAME库中冲击温度接近。研究结果表明采用该测温系统能够有效诊断金属材料的冲击温度,为后续进一步获取金属材料冲击温度数据奠定了基础。     

Sustainable and Robust Graphene Cellulose Paper Decorated with Lithiophilic Au Nanoparticles to Enable Dendrite-free and High-Power Lithium Metal Anode

Lithium metal anodes (LMAs) with high energy density have recently captured increasing attention for development of next-generation batteries. However, practical viability of LMAs is hindered by the uncontrolled Li dendrite growth and infinite dimension change. Even though constructing 3D conductive skeleton has been regarded as a reliable strategy to prepare stable and low volume stress LMAs, engineering the renewable and lithiophilic conductive scaffold is still a challenge. Herein, a robust conductive scaffold derived from renewable cellulose paper, which is coated with reduced graphene oxide and decorated with lithiophilic Au nanoparticles, is engineered for LMAs. The graphene cellulose fibres with high surface area can reduce the local current density, while the well-dispersed Au nanoparticles can serve as lithiophilic nanoseeds to lower the nucleation overpotential of Li plating. The coupled relationship can guarantee uniform Li nucleation and unique spherical Li growth into 3D carbon matrix. Moreover, the natural cellulose paper possesses outstanding mechanical strength to tolerate the volume stress. In virtue of the modulated deposition behaviour and near-zero volume change, the hybrid LMAs can achieve reversible Li plating/stripping even at an ultrahigh current density of 10 mA cm⁻² as evidenced by high Coulombic efficiency (97.2 % after 60 cycles) and ultralong lifespan (1000 cycles) together with ultralow overpotential (25 mV). Therefore, this strategy sheds light on a scalable approach to multiscale design versatile Li host, promising highly stable Li metal batteries to be feasible and practical.     

双光子吸收材料用于高功率激光近场控制技术

为了提高高功率激光光束质量和改善近场均匀性,在SILEX-Ⅰ超短脉冲激光装置的泵浦光系统上进行实验,研究了一种双光子吸收材料的光限幅特性及对激光近场的改善情况。利用泵浦光SAGA激光器输出的激光进行光限幅特性实验。结果表明:该材料具有明显的光功率限幅特性,且透过率较高,当入射光强小于0.60 GW/cm2时,透过率大于90%。在SILEX-Ⅰ装置的泵浦光系统进行联机实验,研究了该材料对激光近场均匀性的改善。实验结果表明:经过材料后,激光近场均匀性和调制度有明显改善。