Luminescence investigations of the GaP-based dilute nitride Ga(NAsP) material system

Multi-quantum well heterostructures (MQWHs) of the novel Ga(NAsP)/GaP material system have been grown, pseudomorphically strained to GaP-substrate. The crystalline perfection is verified by transmission electron microscopy (TEM). For As-concentrations in excess of about 70%, a direct band structure and adequate luminescence efficiency for laser device application is observed. Temperature-dependent photoluminescence (PL) investigations show the influence of carrier localisation and non-radiative recombination processes typical for dilute nitride materials. With rising N content in the active material, the emission wavelength shifts towards longer wavelength, leading to Ga(NAs)/GaP MQW structures with photon energies below the indirect band gap of silicon (Si). At the same time the luminescence intensity drops due to an increase in non-radiative carrier traps and/or structural degradation.     

Structure of solid monolayers and multilayers of n -hexane on graphite

We present all-atom molecular dynamics simulations ofn-hexane on the basal plane of graphite at monolayer and multilayer coverages. In keeping with experimental data, we find the presence of ordered adsorbed layers both at single monolayer coverage and when the adsorbed layer coexists with excess liquid adsorbate. Using a simulation method that does not impose any particular periodicity on the adsorbed layer, we quantitatively compare our results to the results of neutron diffraction experiments and find a structural transition from a uniaxially incommensurate lattice to a fully commensurate structure on increasing the coverage from a monolayer to a multilayer. The zig-zag backbone planes of all the alkane molecules lie parallel to the graphite surface at the multilayer coverage, while a few molecules are observed to attain the perpendicular orientation at monolayer coverage. Dedicated to Professor C N R Rao on his 70th birthday     

Photochemical attachment of polymers on planar surfaces with a covalently anchored monolayer of a novel naphthyl ketone photochemical radical generator

A monolayer of covalently anchored, novel, binaphthyl ketone is used as a surface‐confined photochemical radical generator (PRG) for anchoring a variety of polymers to silicon surfaces. The precursor PRG is synthesized by the application of a facile and novel method for the oxidation of sterically hindered benzylic hydrocarbons to carbonyl compounds. Oxidation was carried out with a stoichiometric amount of potassium peroxydisulfate, in the presence of a catalytic amount of copper sulfate in an acetonitrile/water mixture. The PRG synthesized is characterized by ¹H NMR, UV, and Fourier transform infrared (FTIR). The covalently attached monolayers are characterized by X‐ray photoelectron spectroscopy, ellipsometry, and water contact angle measurements. The method developed is applicable to the preparation of a monolayer of a variety of polymers on a wide range of substrates carrying surface hydroxyl groups. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5413–5423, 2004     

Synthesis and Structure of Novel Organocycloborates

A series of α,ω‐boryl(bromo)alkanes of the general formula R₂B? (CH₂)_n? Br (n=3, 4, 5, 6) was obtained in high yield following a standard hydroboration protocol. Upon treatment with Mg turnings and formation of the respective Grignard species, all alkanes with n=4 to 6 underwent an unprecedented boron‐centered cyclisation reaction with formation of boratacyclopentanes, ‐hexanes, and ‐heptanes, respectively. All new compounds were isolated in high yields as colourless, crystalline materials and characterised in solution by multinuclear NMR spectroscopy. Four representative examples were chosen for X‐ray diffraction studies, thus providing the first structurally characterised ring systems of that size at a tetraalkyl borate centre.     

Isosteres of peptides: boron analogs as dipolar forms of α‐amino acids – a theoretical study

Modification of peptides to produce peptidomimetics is of great interest, with the aim of designing potent, selective, and metabolically stable analogs having certain conformational properties. Organoboranes have been reported in the literature with a wide range of therapeutic applications. One of the therapeutically important class of molecules is amine‐carboxyboranes derived from amino acids by replacement of the Cα atom of an amino acid/peptide by boron. The conformational preferences of these peptides, with respect to backbone ω, ?, and ψ torsion angles, have been investigated by theoretical calculations. The amide bond in these molecules has the same geometry in the ground and transition states as the natural peptides. However, the boron isosteres of glycine and alanine peptides are less structured than their natural derivatives, but are distinguished by structures with a positive value for the ? angle, which is normally disfavored for natural peptides. This property could be used to build peptides with a geometry not usually seen in natural peptides. Copyright © 2007 John Wiley & Sons, Ltd.     

Cardy's formula for some dependent percolation models

We prove Cardy's formula for rectangular crossing probabilities in dependent site percolation models that arise from a deterministic cellular automaton with a random initial state. The cellular automaton corresponds to the zero-temperature case of Domany's stochastic Ising ferromagnet on the hexagonal lattice  (with alternating updates of two sublattices) [7]; it may also be realized on the triangular lattice 𝕋 with flips when a site disagrees with six, five and sometimes four of its six neighbors. Received: 24 December 2001     

Zur Synthese und Struktur von K3N

Synthesis and Structure of K₃N Two phases in the binary system K/N have been obtained via co‐deposition of potassium and nitrogen onto polished sapphire at 77 K and subsequent heating to room temperature. The powder diffraction pattern of one of these phases can be satisfactorily interpreted by assuming the composition K₃N, and the anti‐TiI₃ structure‐type, which is also adopted by Cs₃O. The resulting hexagonal lattice constants are: a = 779.8(2), c = 759.2(9) pm, Z = 2, P6₃/mcm. Comparison with possible structures of K₃N generated by computational methods and refined at Hartree‐Fock‐ and DFT level, reveals that the energetically most favoured structure has not formed (presumable Li₃P‐type), but instead one of those with very low density. In this respect, the findings for K₃N are analogous to the results on Na₃N. The thermal evolution of the deposited starting mixture has been investigated. Hexagonal K₃N transforms to another K/N phase at 233 K. Its XRD can be fully indexed resulting in an orthorhombic cell a = 1163, b = 596, c = 718 pm. Decomposition leaving elemental potassium as the only residue occurs at 263 K.     

Thermal conductivity, dislocation density and GaN device design

The performance of high power transistor devices is intimately connected to the substrate thermal conductivity. In this study, the relationship between thermal conductivity and dislocation density is examined using the 3 omega technique and free standing HVPE GaN substrates. Dislocation density is measured using imaging cathodoluminescence. In a low dislocation density regime below 10⁵ cm⁻², the thermal conductivity appears to plateau out near 230 W/K m and can be altered by the presence of isotopic defects and point defects. For high dislocation densities the thermal conductivity is severely degraded due to phonon scattering from dislocations. These results are applied to the design of homoepitaxially and heteroepitaxially grown HEMT devices and the efficiency of heat extraction and the influence of lateral heat spreading on device performance are compared.     

Large-area boron carbide protective coatings for controlled thermonuclear research prepared byin situ plasma CVD

Impurity release from the first wall and components facing the hot plasma in Tokamak devices for controlled fusion research and the concomitant pollution of the plasma lead to enhanced energy losses and deuterium-tritium luel dilution. Both these effects can prevent reaching the ignition conditions. The recently developed technique for large areain situ deposition of boron carbide protective coatings by means of plasma-induced chemical vapor deposition enables one to significantly improve the purity of the fusion plasma. The prospects of approaching the scientific break-even in the large machines of the Tokarnak type has been increased.Extended version of an invited paper presented at the 10th International Symposium on Boron, Borides, and Related Compounds, Albuquerque, New Mexico, August 1990.The term Tokarnak is an abbreviation of the Russian name toroidal magnetic chamber.     

Immobilization of thiabendazole-specific monoclonal antibodies to silicon substrates via aqueous silanization

Monoclonal antibodies specific for thiabendazole were immobilized to silicon, silicon dioxide, stoichiometric silicon nitride, and silicon-rich silicon nitride surfaces. This work provides the foundation for the development of a homogeneous sensor system for rapid detection and quantification of thiabendazole residues in produce and animal tissue. Immobilization was performed via aqueous silanization of the substrate followed sequentially by treatment with glutaraldehyde and contact with antibody solution in the presence of detergent. Surfaces were challenged with thiabendazole-horseradish peroxidase conjugate in an ELISA format to estimate immobilized antibody load. A stable and reproducible surface loading of 2 x 10¹¹ antibodies/cm² was obtained only after surfaces received postimmobilization treatments to remove nonspecifically adsorbed antibody. No difference in surface loading was noted when using 30% hydrogen peroxide rather than nitric acid for silanol activation. Little difference was noted among the antibody loadings achieved on the various silicon substrates. Bound antigen-enzyme conjugate was eluted with 0.1N acetic acid and reproducible surface activity was measured for up to four consecutive antigen challenges. Immobilized antibody surfaces were stabilized with 2% sucrose, dehydrated at 37‡C and stored in vacuum or stored at 4‡C in phosphate buffered saline containing 0.01% sodium azide without significant loss of activity.