Fiber-Optic Chemical Sensor for Detection of NO2 Using Poly (3-Octylthiophene)

A fiber-optic chemical sensor (FOCS) for detection of nitrogen dioxide (NO₂) molecules is reported. The FOCS presents an optropode structure because of the transmission properties of the sensitive material. The NO₂ FOCS is activated by using the semiconductor polymer: regioregular head-to-tail poly(3-octylthiophene-2,5-diyl). The operation wavelength of the sensor is 543.5 nm such that a simple LED and detector can be used for the design of this device. The sensor response decreases after each exposure, demonstrating the reduction in sensitivity as well as irreversibility lower than 5%. However, its properties such as rapid response, high selectivity, high sensitivity (0.43 ± 0.01 muW/ppm), hygroscopic properties, and its operation at room temperature make this kind of FOCS a good alternative for NO₂ toxic gas detection.     

高剂量率单次快脉冲辐射参量测量

记述了“强光一号”高剂量率脉冲辐射装置在状态调试过程中对其出射波形和辐射剂量进行监测的基本情况，实际监测的结果与设计方监测的结果进行了比对，双方的剂量监测值基本一致，偏差在20％以内；双方的波形形状十分相似，但测量得到的波形半宽度却相差10～20ns，最后对双方束流监测产生的差异进行了定性分析。     

Angular response characteristic of pyramid shape fast neutron dosimeter using CR-39 films

CR-39 is a highly sensitive etched track detector for neutron monitoring and dosimetry applications but its dose equivalent response is strongly direction dependent with respect to the incident neutrons. This is considered to be a major drawback for their use. In the present study, an attempt has been made to develop a pyramid shaped dosimeter, which consists of polyethylene material of thickness 1 mm with the provision to hold three CR-39 films at an angle of 35° to each other. The response of CR-39 in this configuration under optimum electrochemical etching at elevated temperature have been found nearly angular independent and therefore the dosimeter can be used for neutron monitoring, i.e. personnel as well as area monitoring.     

Threonine-FX dosimeter for food irradiation

A detailed study for the spectrophotometric readout method for L-threonine powder, [CH₃CH(OH)CH(NH₂)COOH], was done. In this method, 400 mg unirradiated/irradiated L-threonine powder was dissolved in 10 ml of a solution which contains 3×10⁻⁴ mol dm⁻³ ferrous ammonium sulphate and 1.7×10⁻⁴ mol dm⁻³ xylenol orange (XO) in aerated aqueous 0.17 mol dm⁻³ sulphuric acid (FX). The peroxy radicals produced from irradiated threonine oxidize ferrous ions and XO forms a complex with ferric ions as well as controls the chain length of ferrous ion oxidation. The plot of absorbance at 556 nm against dose is linear in the dose range 20–400 Gy and doses down to about 1 Gy can be measured using 10-cm path cells. Response of the dosimeter is independent of irradiation temperature above 20. A dose of 50 Gy–10 kGy can be measured dissolving 50 mg threonine powder in 10 ml of a solution which contains 3×10⁻⁴ mol dm⁻³ ferrous ammonium sulphate and 1.3×10⁻⁴ mol dm⁻³ XO in aerated aqueous 0.06 mol dm⁻³ sulphuric acid (FX). The plot of absorbance at 552 nm against dose is non-linear. However dosimeter shows linear dose response up to 1000 Gy. Irradiated threonine powder is stable for about 3 months. The reproducibility of the method is better than ±2%. This dosimeter is very useful as transfer dosimeter for food irradiation programme.     

Low dose measurement with thick gate oxide MOSFETs

The low dose limit and the accuracy of high sensitivity MOS ionizing radiation dosimeters fabricated at LAAS-CNRS are investigated.     

基于光频调节的干涉型光纤水听器相位补偿检测方法

提出了一种基于光源频率调节的干涉型光纤水听器主动相位补偿的信号检测方法。详细介绍了该方法的基本检测原理,对信号解调误差进行了理论分析与仿真。为了验证该方法的可行性,搭建了实验系统,并编写了实时的信号采集、处理程序,对某一干涉型光纤水听器的声压灵敏度进行了测试。在频带20 Hz-1.3 kHz上,平均声压灵敏度为-162.2 dB(0 dB=1 rad/μPa),波动小于±0.8 dB,与采用相位载波调制解调方法测量的结果基本吻合。实验结果证明该方法是有效的。由于传感部分不含有源器件,便于实现全光纤化,且解调算法简单、检测频带宽,该方法能被广泛应用到各种干涉型光纤传感器的信号检测当中。     

层层自组装聚电解质膜光纤传感器的制备和应用

在过去几十年中,光纤的应用已经渗透到多个学科领域。光纤的抗电磁干扰、可远程监控、多重监测、体积小及质量轻等特点,使其在传感器研究领域备受关注。聚电解质层层自组装膜构建的光纤传感器自2000年诞生以来,已快速发展成为传感器领域新的研究热点。该类光纤传感器在微量物质的监测方面具有广泛的应用前景。本文从光纤和光纤传感器优点出发,总结了基于层层自组装多层膜的光纤传感器种类、性能、检测原理以及相应的光纤结构和自组装材料;进而结合作者已做的相关工作,论述了在光纤基底上的聚电解质层层自组装及基于自组装膜的光纤传感器的测试;重点综述了近十年层层自组装膜的光纤pH传感器、湿度传感器、气体传感器、生物传感器及其他类型的光纤传感器的制备与应用,并展望了今后聚电解质层层自组装多层膜光纤传感器的发展。     

A study on the real-time radiation dosimetry measurement system based on optically stimulated luminescence

The optically stimulated luminescent (OSL) radiation dosimeter technically surveys a wide dynamic measurement range and a high sensitivity.Optical fiber dosimeters provide capability for remote monitoring of the radiation in the locations which are difficult-to-acoess and hazardous.In addition.optical fiber dosimeters are immune to electrical and radio-frequency interference.In this paper,a novel remote optical fiber radiation dosimeter is described.The optical fiber dosimeter takes advantage of the charge trapping materials CaS:Ce, Sm that exhibit OSL.The measuring range of the dosimeter is from 0.1 to 100 Gy.The equipment is relatively simple and small in size,and has low power consumption.This device is suitable for measuring the space radiation dose and also can be used in high radiation dose condition and other dangerous radiation occasions.     

Flexible sheet with radiophotoluminescence glass beads for remotely monitoring high beta-surface-contamination

A flexible sheet was made with radiophotoluminescence (RPL) glass beads on an experimental basis for visualization of high beta-surface-contamination. A simple RPL observation system for remote contamination monitoring was constructed with a homemade UV floodlight and a commercially available digital camera with supplementary optical lenses and filters. In preliminary experiments, RPL images were well observed with the digital camera of the present system. Their precise RPL intensity was determined after the correction of nonlinear response of the camera. It was expected from experiments that RPL images of beta-surface-contamination could be quantitatively evaluated through calibration, i.e., the conversion of camera images to dose data on the sheet-type glass dosimeter.     

Tunable All-Optical Microwave Filters Based on Fiber Loop and Chirped Fiber Bragg Gratings

All-optical microwave filters are important parts of fiber-optic microwave/millimeter wave processing systems. In this paper, two novel passive tunable all-optical microwave filters based on fiber loop and chirped fiber Bragg gratings (CFBGs) are demonstrated, where the frequency response of the both filters can be continuously tuned by adjusting the wavelength of the input light. The required free spectral range (FSR) of the filters can be obtained by carefully controlling the length of fiber loop and the positions of the CFBGs in the fiber loop. Experimental results prove the feasibility of the proposed filtering structures.