Performance of a CW pumped Nd:YVO4 amplifier with kHz pulses

Until recently, simple and reliable high repetition-rate laser sources with nanosecond pulses much shorter than from conventional A-O Q-switch lasers were not available. However over the past 2 years we have developed such lasers based on proprietary fast E-O switching technology, which allows designs delivering 1 ns pulses and subnanosecond jitter for good synchronisation. The technology provides pulses with multi-kW peak power and repetition-rates to >100 kHz.Most recently, the performance of these short pulse lasers has been developed further by implementing oscillator/amplifier (master oscillator and power amplifier, MOPA) technology which increases the output to >1 W average power. Here we report on a simple model that has been used to predict the performance of the CW pumped Nd:YVO₄ amplifier used in the MOPA laser. The model is based on the well-known expressions for the saturated gain applying to laser pulses, but more usually applied to pulse-excited amplifiers. The model is shown to allow a good interpretation of the amplifier behaviour for kHz pulses and to be a useful tool for predicting the performance of the MOPA laser.     

Anomalies in the Absorption and Reflection of a High-Power Ultrashort Laser Pulse by a Plasma with a Solid-State Density

The patterns of absorption and reflection of an ultrashort laser pulse by a plasma with a solid-state density, which are realized in the mode of the normal skin effect, are studied. It is shown that a decrease in low-power pulse duration shorter than the period corresponding to the fundamental frequency of radiation leads to an increase in the absorption coefficient. If the pulse power is so high as to provide electron heating during a time shorter than the reciprocal fundamental frequency, nonlinear suppression of absorption takes place and the spectrum of the reflected radiation contains odd harmonics of the fundamental frequency.     

A compact autocorrelator for the wavelength range between 4 and 10 μm

A compact autocorrelator suitable for the measurement of the optical pulse length of the infrared free electron laser (IR-FEL) at the S-DALINAC is described. It allows to investigate the energy transfer process from the electrons into the laser light within the undulator of the FEL. The autocorrelator utilizes the second harmonic generation (SHG) and it provides the possibility of a background-free measurement at wavelengths between 4 and 10 μm. Simulations for three different crystals used for SHG show that the largest efficiency for SHG and the best temporal resolution is achieved with a ZnGeP₂ crystal at a length of 2 mm. A test experiment at the free electron laser for infrared experiments confirmed the expected high efficiency of about 7.5% of SHG for the ZnGeP₂ crystal as well as the easy handling and fast adjustment of the system.     

Structure induced by irradiation of femtosecond laser pulse in dyed polymeric materials

We investigated the structures induced by an irradiation of a near‐infrared (NIR) femtosecond laser pulse in dye‐doped polymeric materials {poly(methyl methacrylate) (PMMA), thermoplastic epoxy resin (Epoxy), and a block copolymer of methyl methacrylate and ethyl acrylate‐butyl acrylate [p(MMA/EA‐BA) block copolymer]}. Dyes used were classified into two types—type 1 with absorption at 400 nm and type 2 with no absorption at 400 nm. The 400‐nm wavelength corresponds to the two‐photon absorption region by the irradiated NIR laser pulse at 800 nm. Type 1 dye‐doped PMMA and p(MMA/EA‐BA) block copolymer showed a peculiar dye additive effect for the structures induced by the line irradiation of a NIR femtosecond laser pulse. On the contrary, dye‐doped Epoxy did not exhibit a dye additive effect. The different results among PMMA, p(MMA/EA‐BA) block copolymer, and Epoxy matrix polymers are supposed to be related to the difference of electron‐acceptor properties. The mechanism of this type 1 dye‐additive‐effect phenomenon for PMMA and p(MMA/EA‐BA) block copolymer is discussed on the basis of two‐photon absorption of type 1 dye at 400 nm by the irradiation of a femtosecond laser pulse with 800 nm wavelength and the dissipation of the absorbed energy to the polymer matrix among various transition processes. Dyes with a low‐fluorescence quantum yield favored the formation of thicker grating structures. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2800–2806, 2002     

超快光电测量技术

本文综述了近年来趔快光电测量技术的新进展，其中包括扭快光电材料的特性、高速光电器件的基本原理，着重介绍了若干主要的用快光电测量技术．     

Broadband and band-selective IMPRESS-gHMBC: compensation of refocusing inefficiency with synchronized inversion sweep

Compensation of refocusing inefficiency in a gHMBC experiment by replacing the rectangular pi pulse with a pair of adiabatic pulses with synchronized inversion sweep (CRISIS) significantly improves the performance of the gHMBC experiment. The CRISIS-gHMBC experiment retains the pure absorptive shapes in F1 and hence results in better lineshape and higher resolution than the current versions of magnitude mode gHMBC spectra. When used as a broadband experiment, CRISIS-gHMBC, owing to better refocusing efficiency of the adiabatic pulse pairs, gives improved performance across the 13C spectral width. Moreover, it is shown that CRISIS-gHMBC is a robust and improved alternative and when used along with the IMPRESS (Improved Resolution using Symmetrically Shifted pulses) technique further increases the sensitivity and resolution without additional experimental time. The IMPRESS-CRISIS combination is demonstrated for broadband gHMBC and band-selective gHMBC experiments. The ICbs-gHMBC [IMPRESS-CRISIS-band-selective gHMBC] experiment is an attractive and better alternative to individual band-selective gHMBC.     

Dynamics of excited m-dichlorobenzene

Dichlorobenzene is a precursor molecule of di-oxins, which are some of the most toxic chemicals and are suspected of being mutagenic with the structure of benzene rings containing different numbers of chlorine atoms. They are seriously harmful to the health of human. Therefore, it is necessary to study these aryl chemicals especially dichlorobenzene molecules in great detail. In recent years, a number of groups have investi-gated the molecules of aryl halide. The near ultraviolet absorption sp…     

Interaction of light filaments in air

This paper analytically investigates the interaction of light filaments generated by a femtosecond laser beam in air. It obtains the Hamiltonian of a total laser field and interaction force between two filaments with different phase shifts and crossing angles. The property of the interaction force, which leads the attraction or repulsion of filaments, is basically dependent on the phase shift between filaments. The crossing angle between two filaments can only determine the magnitude of the interaction force, but does not change the property of the force.     

双极性固态直线变压器驱动器的研制

在针对脉冲电磁场肿瘤消融的应用场合,双极性脉冲比单极性脉冲效果更均匀,而要产生ns级前沿的双极性高压纳秒或亚微秒脉冲难度大,电磁干扰强,控制要求更高。设计了一台双极性全固态直线型变压器驱动源(SSLTD),双极性SSLTD由结构完全相同的LTD模块经过副边绕组反向串联构成,在负载上实现双极性窄脉冲。双极性SSLTD输出波形稳定的脉冲的关键在于磁芯复位,通过电阻负载实验,重点对比分析了复位电流的形式对复位效果的影响,以及采用直流复位时幅值、脉宽、正负脉冲时间间隔、单级模块中开关管并联数量、复位电流大小对双极性SSLTD输出的影响。实验结果表明,所设计的双极性SSLTD能够在500 Ω负载上稳定产生重频双极性纳秒脉冲,输出电压0～±5 kV可调,脉宽200～400 ns可调,正负脉冲时间间隔0～1 ms可调,上升沿和下降沿20～50 ns;反向串联的直流复位电路结构简单、复位效果好。该脉冲源使用模块化设计,结构紧凑,电气绝缘要求较低,可灵活输出双极性、正极性与负极性高压亚微秒脉冲。     

Studies on defect formation in femtosecond laser-irradiated PMMA and PDMS

We report here our results on the spectroscopic and elemental analysis of femtosecond (fs) laser-modified regions in polymers of polymethylmethacrylate (PMMA) and polydimethylsiloxane (PDMS) in the context of defect formation and emission in the visible region. Different physical and chemical models are used to explain the changes in modified regions. We found that the emission intensity, recorded from the fs-modified regions of polymers, decreased over time to a constant value. We also demonstrate that these materials are suitable for the preparation of the microstructures en route for light guiding applications. The fs laser-irradiated regions exhibited paramagnetic behavior as was confirmed from electron spin resonance studies through the formation of peroxide-type free radicals. Raman mapping was performed in the modified regions which consisted of defects and found that the modulations in intensity are predominant in the central portion of the structure compared to edges. Elemental analysis has been performed in the modified regions using field emission scanning electron microscope instrument and energy-dispersive X-ray absorption spectroscopy to estimate the percentage contents of individual elements which resulted in defect formation such as paramagnetic and optical centers.