Analysis of concentration patterns in volcanic rocks: Insights into dynamics of highly explosive volcanic eruptions

In this contribution we present new data resulting from the analysis of concentration patterns of mixed juvenile fragments ejected by a highly explosive volcanic eruption that occurred on Salina Island (Aeolian Islands, Italy) and our aim is to identify the fluid-dynamic regime characterizing the magma mixing process. Concentration patterns are studied by calculating the power spectrum of concentration variability along transects crossing the magma mixing structures. Results indicate that the slope of power spectrum has an average value of about −5/3, according to Kolmogorov law of turbulence, and suggest that the magma mixing process, in the studied conditions, can be approximated by considering the passive scalar mixing hypothesis in homogeneous isotropic turbulent flow. These results represent a first step towards a better understanding of magma mixing processes associated to highly explosive volcanic eruptions and this first step is taken by studying concentration patterns in volcanic rocks by coupling petrological and non-linear dynamics methods.     

Closed solution to electromagnetic scattering of a plane wave by an eccentric cylinder coated with metamaterials

Closed series solution of electromagnetic scattering by an eccentric coated cylinder is achieved in matrix form. Diffracted field patterns are examined for an incident plane transverse magnetic (TM) wave. The solution is found by the classical separation of variables technique and the translational addition theorems. Wave transformation and orthogonality of the complex exponentials are employed to produce an infinite series. Numerical results are then shown by shortening the infinite series to a limited number of terms. Solutions are discussed for a dielectric or a metamaterial coating.     

On the evolution of two-dimensional patterns in an inviscid liquid sheet

We perform an analysis of the pattern formation for a moving sheet of inviscid fluid. The sheet, which is assumed to have an infinite horizontal extent, moves at some prescribed velocity into a passive surrounding gas. The sheet’s thickness is assumed much smaller than the horizontal scale of the fluid motion. By considering a system that is symmetric with respect to the horizontal planes, long scale asymptotics are used to reduce the full governing equations in three dimensions to a set of three coupled nonlinear partial differential equations for the horizontal components of the velocity field and the height of the interface profile. The interfacial conditions consisting of the kinematic and normal stress balance are incorporated into these evolution equations. Investigations are carried out as function of the sole dimensionless parameter, namely the Weber number. A small amplitude stability analysis around the planar gas–liquid interface reveals that wave patterns in the form of traveling plane waves occur subcritically, and are therefore unstable. The reduced evolution equations are solved numerically for fixed values of the Weber number. Since the reduced system of equations is homogeneous, the wave motion is generated by initial conditions. Five initial conditions have been imposed: one-dimensional rolls, two-dimensional squares, two-dimensional hexagons, two-dimensional ridges, and smooth peaks. The ensuing evolution of the liquid sheet’s shape and corresponding flow fields are described by illustrations of the changes in the sheet’s morphology with time.     

二组分混合物的最小流化特性 Ⅰ.混合/分离状态与最小流化空隙率

分析了二组分混合物的３种混合／分离状态及在完全混合时发生连续相转变的极限组成。提出一个判别非等密度体系混合／分离状态的法则与确定混合物空隙率简易可行的随意松散堆积方法。     

利用DPN技术直接构建磁性纳米图形

在纳米尺度下构建有序的磁性模板和图形是当前的研究热点之一 [1,2 ] .这种模板在生物样品的分离[1] 、磁电子学研究和信息存储 [2 ] 等领域具有重要意义 .目前 ,光刻 [3] 、微触点印刷 [4 ] 和自组装 [5] 等多项技术已被用来构建各种纳米模板 .1 999年 ,美国西北大学 Mirkin小组 [6 ]发明的 Dip- pen纳米刻蚀技术 (简称 DPN技术 )更在可控组装方面显示出巨大优越性 .这项技术是在一定驱动力作用下 ,使吸附在原子力显微镜 ( AFM)针尖上的分子“墨水”逐渐转移到基底表面上 ,实现纳米模板的可控构建 .与传统技术相比 ,DPN技术可在纳米尺…     

Analytical,structural and electrical characterization of SiGe layers by electron microbeam techniques

k-ratios of Ge-L and Si-K measured at different beam energies allow to evaluate simultaneously composition and thickness of SiGe layers on a Si substrate. A simple technique applying backscattered electrons also enables estimation of composition of bulk SiGe and of composition and thickness of relatively thick (200 nm) SiGe layers on Si. Electron channeling patterns of pseudomorphic SiGe/Si structures and of pure Si substrate show no significant differences whereas in relaxed structures a smearing of the pattern with increasing density of misfit dislocations is observed. Under particular conditions the technique of the electron beam induced current permits imaging of recombination-active misfit dislocations with a spatial resolution around 0.2 m. Moreover, a repulsion of holes due to the valence-band offset in a n-Si/SiGe heterostructure was detected.     

不同种植方式对陆生植物去除富营养化水体中磷的影响

以陆生植物美人蕉（Canna generalis）、紫背万年青（Rhoeo discolor）为对象,研究了其不同的种植方式对净化富营养化水体中磷的影响．结果表明,美人蕉、紫背万年青的双倍生物量组对水体中TP、DTP和DIP的去除率与它们的单倍生物量组呈显著性差异,植物对水体中P的去除效果随着植物生物量的适度增加而提高．两种陆生植物的复合种植体系对TP、DTP和DTP的去除率和单一种植体系差别不明显,说明美人蕉、紫背万年青的不同种植体系对水体中TP、DTP和DIP去除率的影响不大．从美人蕉、紫背万年青去除水体中TP、DTP和DIP的动态过程拟合模型可以看出各植物处理组对水体中不同形态P有良好的去除效应．     

A study on the distribution of adsorbed nanoparticles

We use Monte Carlo simulation to calculate the distributions of particles under adsorption force near planar and cylindrical surfaces,respectively.Both hard sphere interaction and repulsive Yukawa (screened coulomb) interaction are employed in our simulations.We study the influence of the inter-particle potentials.The difference between the MC simulation results and the analytical results of ideal gas model shows that the interaction between particles plays an important role in the density distribution under external fields.Moreover,the 2-dimensional constructions of particles close to the surface are studied and show relations of the interaction between particles.These results may indicate us how to improve the methods of building nanoparticle coatings and nano-scale patterns.     

Computer Simulation of a 3-D Sensing System with Structured Illumination

A computer simulation system of three-dimensional sensing with structured illumination is presented. It includes the generation of deformed fringe patterns from 3-D shapes and the reconstruction of 3-D shapes, conversely. Some experimental results of the deformed fringe pattern and the reconstructed object shapes are presented. We have also discussed the effect of some major system parameters on the measurement results and considered how to correct these parameters according to the measurement result of the standard plane. Using this simulation system, the major system parameters: environmental conditions, measurement accuracy and algorithm evaluation of the 3-D shape measurement system based on PMP, FTP, SPM, etc., can be researched. © 1997 Elsevier Science Ltd. All rights reserved.     

Book Reviews

Room temperature glass containing copper nitrate was produced using the microemulsion-gel method. Ultraviolet-visible spectroscopy and x-ray diffraction spectra were used to demonstrate the presence of copper nitrate in the gel samples. The samples were examined using optical microscopy, with and without polarized filters, and scanning electron microscopy with energy dispersive x-ray analysis, before and after the extraction of the surfactant with an organic solvent. The results indicated that copper nitrate was present throughout the silicate network formed and was associated with the microemulsion components, i.e., the interstitial liquid, remaining in the bulk material.