Rocky coast processes: with special reference to the recession of soft rock cliffs

Substantial progress in research on the recession of coastal cliffs composed of soft materials has been made in recent years and data with higher accuracy have been accumulated. This paper provides the state of the art review in the recession studies and highlights two new findings obtained from the reanalysis of existing data. The review topics are: episodic and localized nature of cliff recession; the development of cliffline; the relationship between cliff height and recession rate; mechanisms of cliff toe erosion by waves; a fundamental equation for wave-induced toe erosion; factors controlling toe erosion; and slope instabilities and mass movements. The findings are presented on (1) the temporal change in cliffline recession mode and (2) the effect of beach sediment at the cliff base on the cliff erosion.     

Role of Bulk Vaporization in the Dynamics of Laser-Induced Erosion Plumes of Metals

In different regimes of exposure of metals to pulsed laser radiation, we show the role played by the liquid-drop phase formed from the target material in a laser-induced erosion plume due to bulk vaporization, in the dynamics of this plume. For some metals, the ranges of power densities of the acting laser radiation, at which the condensed-phase particles influence the passage of laser radiation to the target surface, have been determined experimentally. The mechanism of realization of a low-threshold breakdown has been revealed.     

Numerical Modeling of Interior Ballistics Processes in Light Gas Guns

An improved procedure for modeling the operation of a light-gas gun is proposed. The motion of working bodies in both the firing chamber and the light-gas chamber is studied within the framework of the mechanics of heterogeneous media. The problem of barrel heating taking into account its melting and removal of thermal ablation products into the medium inside the bore is solved in a coupled formulation. Heat and mass transfer and friction on the barrel surface are calculated using empirical dependences. The deformable piston is considered compressible and elastoviscoplastic. Allowance is made for the presence of a clearance between the lateral surface of the piston and the barrel bore walls and the associated gas flow between the firing and the light-gas chamber. Calculation results are given.     

玻璃的冲击损伤

冲蚀过程是一个与颗粒反复冲击物体表面而移除物质相关的表面现象．本文研究了玻璃的冲蚀坑的几何尺寸和体积，给出了冲蚀移除物质如何依赖于颗粒流动速度、颗粒尺寸和冲击角的理论关系．通过理论与实验结果相比较，定义了一定冲蚀坑尺度的有效域．     

A facile synthesis of (S)-gizzerosine, a potent agonist of the histamine H2-receptor

A simple and direct approach for the synthesis of (S)-gizzerosine, an amino acid responsible for the disease, black vomit, and a potent histamine H₂-receptor, has been developed in 10 steps and in 31% overall yield from l-aspartic acid. The key steps involved a two-carbon homologation of an l-aspartic acid semi-aldehyde and direct alkylation of unprotected histamine with a 6-hydroxynorleucine derivative.     

The effect of low concentrations of a polyatomic gas in argon on erosion on copper cathodes in a magnetically rotated arc

Experimental results are presented for electrode erosion on copper cathodes in magnetically rotated arcs in argon, dry air, nitrogen, ammonia, and carbon monoxide as well mixtures of the above with argon. Water-saturated argon was also used. Erosion rates were determined by weight loss after chemical cleaning, and the runs were sufficiently long (between 5 to 60 min) to represent steady-state operation. Arc currents of 100 A and gas pressures of 1.1 atm. were used. Pure argon gave the highest erosion rates and the lowest arc velocities. Small concentrations of any of the diatomic gases in argon greatly increased the arc velocity and decreased the erosion rates. The results suggest that erosion is primarily a thermal phenomenon but that the surface chemistry can greatly influence erosion rates by modifying arc behavior.     

Erosion of efficiency in non-uniform linear chromatography

In linear chromatography (i.e. chromatography performed in the absence of sample overloading), when the plate height of a column is roughly uniform along its length, variations in the velocities of solutes are the only possible causes of erosion of efficiency. The sources of these variations (variations in capacity ratio and in the density of the mobile phase, etc.) play no direct role in the erosion of efficiency except through their effect on solute velocities. In other words, what eventually causes the erosion of efficiency is merely variation in the time required for solutes to traverse equally small segments of a column. Significant erosion can only arise from abrupt and deep deceleration of solutes in one or several relatively small segments of a column. If erosion of efficiency caused by pressure gradients in linear SFC is to be large, the depth and the sharpness of the deceleration of a solute must go beyond that hitherto confirmed experimentally. Many relevant examples are analyzed graphically.     

Spectroscopic study of a magnetically rotating arc between opper electrodes in contaminated argon

The effects of N₂ and CO contaminants in atmospheric-pressure argon on an arc rotating between two concentric copper electrodes has been studied using optical spectroscopy of copper lines. The axial temperature of the magnetically driven arc in Ar + %N₂ was determined to be around 10,000 K for arc currents of SO to 200 A. The diffusion process of the copper vapor from the cathode was also studied. A copper density maximum 1 mm from the cathode along the arc column was found in Ar + %N₂. Removal of the contaminated cathode surface layers by the arc when contaminant injection in the plasma gas was stopped was found to be a slow process with a time scale depending on the type of the gas contaminant. The presence of gas contaminant in the electrode material controls the cathode erosion mechanism and the overall arc behavior in the transition between a contaminated to a pure argon arc.     

Physical Properties and Erosion Behavior of Poly(trimethylene carbonate‐co‐ε‐caprolactone) Networks

Form‐stable resorbable networks are prepared by gamma irradiating trimethylene carbonate (TMC)‐ and ε‐caprolactone (CL)‐based (co)polymer films. To evaluate their suitability for biomedical applications, their physical properties and erosion behavior are investigated. Homopolymer and copolymer networks that are amorphous at room temperature are flexible and rubbery with elastic moduli ranging from 1.8 ± 0.3 to 5.2 ± 0.4 MPa and permanent set values as low as 0.9% strain. The elastic moduli of the semicrystalline networks are higher and range from 61 ± 3 to 484 ± 34 MPa. The erosion behavior of (co)polymer networks is investigated in vitro using macrophage cultures, and in vivo by subcutaneous implantation in rats. In macrophage cultures, as well as upon implantation, a surface erosion process is observed for the amorphous (co)polymer networks, while an abrupt decrease in the rate and a change in the nature of the erosion process are observed with increasing crystallinity. These resorbable and form‐stable networks with tuneable properties may find application in a broad range of biomedical applications.