(NH4)2MoS4在活性炭上浸渍过程的研究:Ⅱ.干燥机理及模型

（ＮＨ＿４）＿２ＭｏＳ＿４在活性炭上浸渍过程的研究Ⅱ．干燥机理及模型秦慧芳，张成芳，陆岗，俞丰，朱子彬（华东理工大学无机化工研究所，上海２００２３７）２３７）关键词硫代钼酸铵，活性炭，干燥，钼分布，干燥模型负载型催化剂的活性组分在载体上的分布，受浸渍...     

Allophane: a natural gel in volcanic soils with interesting environmental properties

Volcanic (allophanic) soils are interesting in terms of the control of the greenhouse effect and the knowledge of the porous features is of importance to understand the mechanism of C and N sequestration. These soils contain a peculiar clay: allophane aggregates quite close to the synthetic mineral gels aggregates. These volcanic materials behave as gels during drying with a large irreversible shrinkage that can modify the soil physical properties. Consequently, as for silica gels, we use the CO₂ supercritical drying procedure (SD) to control the drying step and to preserve the structural and textural properties of the soils. The experimental results show that the N and C content in the soils is clearly dependent on the allophane content. We also show that the textural properties, such as specific surface area, are higher for the supercritically dried samples, compared to the classically dried samples, and SAXS results confirm the preserving effect of the SD. With these data, we propose possible effects of the specific surface area on the C and N content of the allophanic soils.     

后处理温度对ZrO2气凝胶超细粉织构和结构的影响

运用神效儿宝治疗小儿厌食症２１０例，总有效率为９５．２％，显效率为６２．４％。该药使用、携带方便、见效快，疗效短，无毒副作用。实验证明，该药能显著提高胃蛋白酶含量，减慢肠管推进性运动，提高动物耐疲劳、耐缺氧能力，提高巨噬细胞吞噬率及血清补Ｃ３含量，且无毒副。作用     

CuO/ZnO/Al2O3合成甲醇催化剂制备方法

ＣｕＯ／ＺｎＯ／Ａｌ２Ｏ３合成甲醇催化剂的制备方法吴晓晖刘金尧刘崇微朱起明（清华大学化学系一碳化工国家重点实验室，北京１０００８４）何菲（天津大学化工系一碳化工国家重点实验室，天津３０００７２）关键词氧化铜，氧化锌，氧化铝，超细粒子，草酸盐胶体...     

Simple preparation and characteristics of silk fibroin microsphere

We investigated the biomaterial and pharmaceutical utility of pure silk fibroin (SF) protein as a possible for separation, using Sephadex G-25 gel filtration chromatography and simply preparing SF microsphere particles (SFMP) by spray dryer. Also, some of its physicochemical properties and morphology were investigated. Obtaining microspheres and/or submicronic particles by spray dryer method was accelerated or completed with the transition from the random coil to the β-sheet structure during spray dryer treatment. It was identified by the basic Fourier transform infrared spectroscopy of SFMP. The various pH range of SFMP’s swelling ratio is dependent on the pH of the solution, not on the occurred gelation. Morphologically, SFMP was spherical in shape, and particles, average 2±10 μm in size, were observed by scanning electron microscope and particle analyzer, respectively. The average molecular weight (M_W) of pure SF protein dissolved in calcium chloride is about 61,500 g/mol as measured by gel permeation chromatography.     

超临界流体干燥过程的分析

以ZrOCl2•8H2O为原料，采用超临界流体干燥（SCFD）法，在短时间内制备出大孔体积高比表面ZrO2气凝胶超细粉．该法具有良好的稳定性和可靠性．建立了醇凝胶中液相含水量的分析方法，为产品质量控制及确认体系是否处于超临界状态提供了依据．对抽提后的溶剂分析表明，SCFD过程是一物理过程．对水的抽提干燥过程亦进行了初步的理论探讨．     

Preparation of Silica-Silk Fibroin-Polyurethane Composite Films via a Sol-Gel Route

A tetraethoxysilane (TEOS)-derived sol aged for 0 h–6 h at room temperature was mixed with a polyurethane (PU) matrix. A composite of silk fibroin (SF) powders and acrylamide (AAm) was dispersed in the sol-PU mixture and dried isothermally at temperatures between 25°C and 120°C to obtain composite films. Three competitive reactions take place, i.e., those between silica-silica, SF-PU and silica-organic phases, during formation of the composite films. These reactions determine the properties such as morphology and homogeneity of the composite films. IR absorption bands for amide groups (–CONH–), C=O (amide I, 1730 cm^–1) and N–H (amide II, 1530 cm^–1) become larger with decreasing aging time of TEOS-derived sol, or increasing drying temperature. DTA exothermic peak due to the thermal decomposition of SF-AAm composite, on the composite films prepared from the 0 h-aged sol or dried at more than 50°C, shifts toward higher temperature by 44 K or more than 63 K respectively, as compared to the SF-AAm composite. Shorter aging time of TEOS-derived sol and higher drying temperature increased the extent of dispersibility, among SF-AAm composite, PU and silica, to bring a composite film more homogeneous.     

Effect of Drying Methods on the Structure and Combustion Activity of Mn—Substituted Hexaaluminate Catalysts

Conventional oven drying (COD) and supercritical drying (SCD) methods were applied to the preparation of Mn-substituted hexaaluminate (BaMnA111O19-α) catalysts. The effect of drying methods on phase composition, specific surface area, pore structure, reduction behavior of Mn^3 ions, and combus-tion activity of the samples was investigated. The homogenous mixing of the components in the sol-gel process could be maintained by SCD, and the hexaaluminate phase was almost the only phase of the resulting materials after calcination. H2-TPR revealed that the Mn^3 ions in the sample obtained by SCD were easier to be reduced than that by COD. Moreover, the samples obtained by SCD have higher surface area, narrower pore size distribution, and higher combustion activity than those obtained by COD.     

Synthesis of Highly Porous Organic/Inorganic Hybrids by Ambient Pressure Sol-Gel Processing

This paper reports the synthesis of highly porous organic/inorganic hybrids by a two-step acid-base catalyzed sol-gel process and ambient pressure drying. In the method organic and inorganic precursors are copolymerized so as to incorporate organic ligands into the solid network. The two-step acid-base catalyzed process was used to prevent phase segregation during the hydrolysis and co-condensation of organic and inorganic precursors. The organic ligands incorporated into the solid gel network modify the surface chemistry. Thus, the wetting angle is significantly increased so that the collapse of the gel network is greatly reduced upon the removal of pore fluid during drying. Organic/inorganic hybrids with BET surface areas above 1250 m2/g, porosities above 75% and pore sizes of 8 nm have been synthesized.     

纳米级TiO2粉体的制备研究——Ⅱ.絮凝剂及其浓度的影响

采用溶胶-凝胶-超临界流体干燥(SCFD)法制备纳米级TiO₂超细粉，详细考察了不同絮凝剂及其浓度对TiO₂织构和结构性质的影响。结果表明，利用强碱溶液作为絮凝剂，浓度为5 mol·L^-1是制备大孔高比表面TiO₂超细粉较为适宜的条件。