Scattering from infinite rough tubular surfaces

We study the Helmholtz equation in the exterior of an infinite perturbed cylinder with a Dirichlet boundary condition. Existence and uniqueness of solutions are established using the variational technique introduced (SIAM J. Math. Anal. 2005; 37 (2):598–618). We also provide stability estimates with explicit dependence of the constants in terms of the frequency and the perturbed cylinder thickness. Copyright © 2006 John Wiley & Sons, Ltd.     

Electrical interaction between two cylinders with an ion-penetrable charged membrane in an oil/water interface

The electrical interaction between two long, parallel cylinders each is covered by an ion-penetrable charged membrane immersed in an oil/water interface is investigated. The effects of contact angle, radius of cylinder, and membrane thickness on the electrical interaction force are examined. The results of numerical simulation reveal that the following conditions lead to a greater electrical interaction force: (i) a larger contact angle, i.e. a larger fraction of a cylinder in the oil phase; (ii) a larger cylinder radius; and (iii) a thinner membrane. For a fixed ionic strength, the electrical interaction force is insensible to the type of electrolytes in the water phase, in general. However, if two cylinders are close enough, then the higher the valence of counterions the greater the electrical interaction force.     

Influence of saddle-splay deformation on lyotropic chromonic liquid crystals confined between two coaxial cylinders

ABSTRACT

A striking feature of lyotropic chromonic liquid crystals confined in cylinder model exhibit double-twist director configurations. Evidence suggests that saddle-splay deformation is among the most important factors for the distortions of director. Previous researches limit the director to distort at a fixed plane (r-? plane) by using specific boundary conditions such as degenerate planar anchoring condition. In this work, we consider lyotropic chromonic liquid crystals confined between two coaxial cylinders with free-surface boundary conditions and Rapini-Papoular-type anchoring conditions. By using finite-difference iterative method to solve the numerical solution of Euler equation, we find that saddle-splay deformation leads to double-twist director configurations under free-surface boundary conditions, which consist of the result under degenerate planar anchoring conditions. Furthermore, at Rapini-Papoular-type anchoring conditions, saddle-splay deformation has a great influence on the director in the radial direction (r direction) and the director distorts in three-dimensional space. Remarkably, our method provides a more accurate theory basis for the measured values of saddle-splay elastic constant K_24。     

Catalytic activity of Pt and Pd in gaseous reactions of H2 and CH4 oxidation at low pressures

1. Download : Download high-res image (85KB)
2. Download : Download full-size image

     

Time domain simulation of vortex-induced vibrations in stationary and oscillating flows

This paper focuses on the further development of a previously published semi-empirical method for time domain simulation of vortex-induced vibrations (VIV). A new hydrodynamic damping formulation is given, and the necessary coefficients are found from experimental data. It is shown that the new model predicts the observed hydrodynamic damping in still water and for cross-flow oscillations in stationary incoming flow with high accuracy. Next, the excitation force model, which is one component of the total hydrodynamic force model, is optimized by simulating the VIV response of an elastic cylinder in a series of experiments with stationary flow. The optimization is performed by repeating the simulations until the best possible agreement with the experiments is found. The optimized model is then applied to simulate the cross-flow VIV of an elastic cylinder in oscillating flow, without introducing any changes to the hydrodynamic force modeling. By comparison with experiment, it is shown that the model predicts the frequency content, mode and amplitude of vibration with a high level of realism, and the amplitude modulations occurring at high Keulegan–Carpenter numbers are well captured. The model is also utilized to investigate the effect of increasing the maximum reduced velocity and the mass ratio of the elastic cylinder in oscillating flow. Simulations show that complex response patterns with multiple modes and frequencies appear when the maximum reduced velocity is increased. If, however, the mass ratio is increased by a factor of 5, a single mode dominates. This illustrates that, in oscillating flows, the mass ratio is important in determining the mode participation at high maximum reduced velocities.     

双旋转附属圆柱对主圆柱尾流控制的影响

基于Fluent 软件平台,采用数值模拟方法对非稳态圆柱体结构尾流流动特性进行了研究．对在Re = 50~200范围内,双旋转附属圆柱的转速对主圆柱体尾流流动特性的影响进行了分析．研究结果表明：随着附属圆柱旋转速率的增加,主圆柱体表面所受阻力系数平均值与均方根值、升力系数均方根值均会减小．同时,旋转速率的变化对柱体结构表面压力分布的影响显著,压力系数在附属圆柱的位置产生了跳跃性变化．另外,当附属圆柱转速达到临界值时,尾流涡街变窄,涡脱落现象消失,并且系统的能量效率到达最佳状态．     

Multi-scale magnetic resonance measurements and validation of Discrete Element Model simulations

This short review describes the capabilities of magnetic resonance (MR) to image opaque single- and two-phase granular systems, such as rotating cylinders and gas-fluidized beds operated in different fluidization regimes. The unique capability of MR to not only image the solids’ distribution (voidage) but also the velocity of the particulate phase is clearly shown. It is demonstrated that MR can provide measurements over different length and time scales. With the MR equipment used for the studies summarized here, temporal and spatial scales range from sub-millisecond to hours and from a few hundred micrometres to a few centimetres, respectively. Besides providing crucial data required for an improved understanding of the underlying physics of granular flows, multi-scale MR measurements were also used to validate numerical simulations of granular systems. It is shown that predictions of time-averaged properties, such as voidage and velocity of the particulate phase, made using the Discrete Element Model agree very well with MR measurements.     

平行柱体对平面波/高斯波束电磁散射

基于等效原理和互易性定理，研究了N个相互平行二维柱体对平面波/高斯波束的电磁散射特性，给出了求解N阶散射场公式.一阶散射可通过求解单个柱体的散射场得到，但对于高阶散射场而言，由于耦合散射的复杂性，很难给出精确的解析解.为了解决这一问题，借助等效原理和互易性定理给出了求解N阶散射场的面积分公式.只要给出柱体的i-1阶散射场及相关目标表面上的等效电流和(或)等效磁流，就可应用此公式求解i阶散射场.应用该近似方法计算了相互平行非均匀等离子体涂层导体圆柱的单/双站散射宽度，讨论了束腰半径、等离子体涂层厚度、电子密度、碰撞频率及雷达频率等对散射结果的影响.     

A ghost fluid Lattice Boltzmann method for complex geometries

A ghost fluid Lattice Boltzmann method (GF‐LBM) is developed in this study to represent complex boundaries in Lattice Boltzmann simulations of fluid flows. Velocity and density values at the ghost points are extrapolated from the fluid interior and domain boundary via obtaining image points along the boundary normal inside the fluid domain. A general bilinear interpolation algorithm is used to obtain values at image points which are then extrapolated to ghost nodes thus satisfying hydrodynamic boundary conditions. The method ensures no‐penetration and no‐slip conditions at the boundaries. Equilibrium distribution functions at the ghost points are computed using the extrapolated values of the hydrodynamic variables, while non‐equilibrium distribution functions are extrapolated from the interior nodes. The method developed is general, and is capable of prescribing Dirichlet as well as Neumann boundary conditions for pressure and velocity. Consistency and second‐order accuracy of the method are established by running three test problems including cylindrical Couette flow, flow between eccentric rotating cylinders and flow over a cylinder in a confined channel. Copyright © 2011 John Wiley & Sons, Ltd.     

Cylindrical polymer brushes

In recent years, research on cylindrical polymer brushes (or molecular bottlebrushes) has received significant attention. In this article, we discuss various strategies for their synthesis and the unique properties arising from their regular multibranched structure. Some recent advances in the application of cylindrical polymer brushes are highlighted. Amphiphilic core– shell cylindrical polymer brushes, for example, have been successfully used as single molecular templates for inorganic nanoparticle formation. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3461–3481, 2005