基于LabVIEW的高温超导材料特性测试实验

高温超导体临界特性的测量是近代物理实验中最为经典的实验之一,本文通过使用GM制冷机,利用Lab-VIEW虚拟仪器软件和高性能采集卡,改进了传统的测量高温超导材料临界特性的实验装置.本测试系统不仅可以测量高温超导体在不同温度下的临界电流,还可以测量其失超传播特性.该实验对于学生了解超导体特性和培养严谨的科学作风十分有益.     

Synthesis and characterization of isotopically enriched methylmercury (CH3201Hg+)

A simple procedure for the synthesis of an important standard, isotopically enriched methylmercury, which is not commercially available, has been established successfully. The isotopically enriched standard synthesized is utilized in conventional isotope dilution mass spectrometry (IDMS), as well as in speciated IDMS (SIDMS), for determination of the true concentration of methylmercury in environmental samples. The CH₃²⁰¹Hg⁺ standard has been synthesized from commercially available ²⁰¹HgO and tetramethyltin. The synthesis time required is 1 h at 60°C. The product is highly pure, yielding more than 90% as ²⁰¹Hg in CH₃²⁰¹Hg⁺. Hazardous dimethylmercury does not occur during this synthesis procedure. The product synthesized was analyzed using high‐performance liquid chromatography coupled with inductively coupled plasma mass spectrometry (ICP‐MS) and ICP‐MS alone in order to determine its concentration, isotopic composition and purity. The stability of the product was also evaluated for over 6 months and found to be stable at 4°C in the dark. The isotopically enriched methylmercury synthesized can be used in SIDMS and IDMS analyses as a standard. Copyright © 2003 John Wiley & Sons, Ltd.     

Determination of the boiling point distribution of sulfur compounds in light cycle oil using GC with a flame photometric detector and pyrolyzer

A method has been developed to determine the boiling point distribution of sulfur compounds in light cycle oils (LCO'S). The method chosen for this analysis was GC with a flame photometric detector (FPD) and pyrolyzer. Tests were carried out to evaluate the recovery efficiency, repeatability, and accuracy of the method. Repeatabilities within 2% were obtained. The recovery of benzothiophenes and dibenzothiophenes was close to 100%; this was important because these are the major sulfur components in LCO's. No hydrocarbon or solvent interferences were observed with the use of the pyrolyzer, even for a 95% solvent level. Comparison with results from other techniques showed that the method accurately determined the levels of sulfur compounds in the LCO boiling point range.     

Determination of styrene in olive oil by an automatic purge-and-trap system coupled to gas chromatography-mass spectrometry

Summary A new gas chromatographic method using an automatic purge-and-trap system coupled to a GC with mass selective detection to analyze styrene at the parts-per-trillions (ng kg^–1) level is described. The method shows a good sensitivity and the detection limit is 10 ng kg^–1 with a relative standard deviation (RSD) of 4.7% for 164 ng kg^–1 styrene in olive oil. This analytical method has been successfully applied to the analysis of styrene in extra-virgin olive oil from the European market.     

Ferromagnetic Properties of Bond-Dilution and Random Positive or Negative Uniaxial Anisotropy Blume-Capel Model

We study the ferromagnetic properties of spin-1 system, which is considered in the frame of the bond dilution and random positive or negative anisotropy Blume-Capel model in the effective field theory and a cutting approximation. The investigation of phase diagrams displays some rich properties of the trajectory of tricritical point, reentrant henomena at low temperatures. Under certain both bond concentrations and random negative anisotropy, there are new transition lines of double tricritical points. So special emphasis is placed on the influence of the bond dilution and random anisotropy on phase diagrams. The magnetizations of the system are also discussed. Some results have not been evealed in previous reports.     

Magnetic resonance in amorphous metals based on Fe in the millimeter radiowave range

The research technique of amorphous magnetics is described. The paper gives the experimental data obtained by a multifunctional low-temperature radiospectrometer Buran in the mm radiowave range and presents their analysis.     

同位素稀释-火花源质谱法分析人参样品中微量元素

本文采用同位素稀释-火花源质谱法定量分析了吉林野山参,园参及高丽参中30多种微量元素的含量。测定下限2μg/g,相对标准偏差在5～28％以内。     

The optimal amount of isotopic spike solution for ultratrace analysis by isotope dilution mass spectrometry

 Inductively coupled plasma mass spectrometry (ICP-MS) and high resolution inductively coupled plasma mass spectrometry (HR-ICP-MS) are powerful methods of determining metallic impurities in the low- and sub-ppt level in process media such as ultra-pure water used in semiconductor and wafer manufacturing. By using mass spectrometers for analysis, an isotope dilution analysis (IDMS) is possible. The reproducibility of an IDMS is unmatched. For concentration levels near the instrument detection limit a novel method is reported to find the optimal amount of isotopic spike solution. This optimal value can be derived by the law of propagation of uncertainty combined with the Poisson statistics of the measured number of counts. Generally, an excess of isotopic spike solution should be used to provide results of lowest possible uncertainty. The results are presented in a diagram for easy practical use. Received: 14 October 1997 · Accepted: 13 February 1998     

Partial molar volumes of cryptand-222 in organic solvents at 25°C

The partial molar volumes at infinite dilution of cryptand-222 (C-222) in water, methanol, acetonitrile, ethanol, dimethylsulfoxide, propanol, 2-propanol, chloroform, benzene, 1-butanol, cyclohexane, butyl-methylketone, hexane, tetrahydronaphthalene, heptane, octane, cyclohexylbenzene and decane were measured at concentrations ranging from 0.01 to 0.1 mol-L^–1 at 25°C. The partial molar volumes at infinite dilution showed remarkable dependency on the molar volume of the solvent. The partial molar volumes at infinite dilution for C-222 increase as the solvent molar volume increases.