圆感应同步器数显表检测方法研究

介绍了圆感应同步器数显表测角系统的工作原理,以及在静态和动态测角方法。提出了两种提高动态测量精度的方法。实验数据验证了方法的合理性。     

RPC读出条的阻抗匹配

文章对高阻板探测器读出条的阻抗匹配问题进行了研究;引入了一个用于计算带状线特性阻抗的经验公式.测量的特性阻抗与经验公式很好地符合,说明这个经验公式可以用于RPC读出条特性阻抗的计算,以改善RPC读出信号的质量,利于RPC探测器性能的测量.     

Three bits eight states photochromic recording and nondestructive readout by using IR light

A photochromic polymer film containing three different diarylethene derivatives, that is, 1,2-bis(3,5-dimethyl-2-thienyl)perfluorocyclopentene (1), 1,2-bis(2,5-dimethyl-3-thienyl)perfluorocyclopentene (2), and 1,2-bis(2-methyl-5-phenyl-3-thienyl)perfluorocyclopentene (3) was prepared. Upon UV irradiation, the three derivatives changed to their closed-ring isomers having different colors, yellow, red, and blue. They showed different spectra not only in UV/Vis region but also in the IR spectral region. Upon irradiation with visible light of appropriate wavelengths, each closed-ring isomer was selectively bleached, and three bits eight states recording was performed. The eight states could be read out nondestructively by using IR light of appropriate wavenumbers.     

Threonine-FX dosimeter for food irradiation

A detailed study for the spectrophotometric readout method for L-threonine powder, [CH₃CH(OH)CH(NH₂)COOH], was done. In this method, 400 mg unirradiated/irradiated L-threonine powder was dissolved in 10 ml of a solution which contains 3×10⁻⁴ mol dm⁻³ ferrous ammonium sulphate and 1.7×10⁻⁴ mol dm⁻³ xylenol orange (XO) in aerated aqueous 0.17 mol dm⁻³ sulphuric acid (FX). The peroxy radicals produced from irradiated threonine oxidize ferrous ions and XO forms a complex with ferric ions as well as controls the chain length of ferrous ion oxidation. The plot of absorbance at 556 nm against dose is linear in the dose range 20–400 Gy and doses down to about 1 Gy can be measured using 10-cm path cells. Response of the dosimeter is independent of irradiation temperature above 20. A dose of 50 Gy–10 kGy can be measured dissolving 50 mg threonine powder in 10 ml of a solution which contains 3×10⁻⁴ mol dm⁻³ ferrous ammonium sulphate and 1.3×10⁻⁴ mol dm⁻³ XO in aerated aqueous 0.06 mol dm⁻³ sulphuric acid (FX). The plot of absorbance at 552 nm against dose is non-linear. However dosimeter shows linear dose response up to 1000 Gy. Irradiated threonine powder is stable for about 3 months. The reproducibility of the method is better than ±2%. This dosimeter is very useful as transfer dosimeter for food irradiation programme.     

A Resettable Keypad Lock with Visible Readout Based on Closed Bipolar Electrochemistry and Electrochromic Poly(3‐methylthiophene) Films

A closed bipolar electrode (BPE) system was developed with electrochromic poly(3‐methylthiophene) (PMT) films electropolymerized on the ITO/rGO electrode as one pole of BPE in the reporting reservoir and the bare ITO electrode as another pole of BPE in the analyte reservoir, in which rGO represents reduced graphene oxide. Under a suitable driving voltage (V_tot), the electrochemical reduction/oxidation of electroactive probes, such as H₂O₂/glutathione (Glu), in the analyte reservoir could induce the reversible color change of PMT films in the reporting reservoir between blue and red. Based on this, a keypad lock with H₂O₂, Glu, and V_tot=?3.0 V as the three inputs and the color change of PMT films as the visible output was established. This system was easily operated and did not need to synthesize the complex compounds or DNA molecules. The security system was easy to reset and could be used repeatedly.     

光学读出微梁阵列红外成像及性能分析

在构建的光学读出微梁阵列(焦平面阵列FPA)非制冷红外成像系统中，实现了无硅基底FPA置于空气中对人体的热成像. 通过FPA在不同真空度环境条件下的成像结果进行比较，分析了热导和系统噪声值随气压变化的关系，以及对系统成像性能的影响，并对气体分子热运动自由程大于空气传热层特征尺度时的气体热传导模型进行了修正分析和实验验证. 实验结果表明：FPA置于空气中时，气体分子撞击微梁引起的微梁反光板无序振动产生的光学读出噪声成为系统噪声的主要来源. 当真空度小于1Pa时，总热导和光学读出噪声值的变化都趋于平缓；当真空度小于10^-2Pa时，空气热导的影响可忽略，总热导降低到微梁感热像素的辐射极限，光学读出噪声也降低到一极小值. 实验结果与理论分析相符合. 关键词： 非制冷红外成像 光学读出 双材料微梁阵列 热导     

静电陀螺仪MUM小角度读取的相关技术研究

讨论了同步解调法实现静电陀螺仪质量不平衡调制（MUM，Mass-Unbalanced Modulation）小角度读取的原理，分析了影响读取分辨率的各种因素，并对其实施方案中的相关技术进行了探讨。研究表明，尽管MUM读取方案非常适用于实心转子静电陀螺仪，但前提是将其小角度读取的分辨率提高到可与光电方法相比的水平（角秒级）。要实现这一目标，首先要保证转子和电极的机械特性达到一定要求；在此基础上，还要在支承系统的结构、转子位移测量电路设计等方面进行精心设计。     

基于无基底焦平面阵列红外热像仪的理论模型分析

基于双材料微悬臂梁热变形原理的光学读出非制冷红外探测阵列经历了从有基底结构向无基底结构的发展过渡,无基底阵列的红外成像结果和有限元模型分析均表明无基底阵列不满足恒温基底条件.本文结合电学比拟的方法,提出了一种新的基于无基底焦平面阵列(focal plane Array,FPA)的热传递分析的理论模型.分析采用整体考虑的思路,避开了无基底FPA阵列各单元热传递互相影响所产生的复杂热分布分析,并考虑了框架对热量的吸收与传递.理论模型采用外边框与环境等温的边界条件,虽不及有限元方法对边界条件的处理灵活,但也已取 关键词： 光学读出 无基底 非制冷红外成像 焦平面阵列     

Oblique-Incidence Characteristics of a Parallel-Aligned Nematic-Liquid-Crystal Spatial Light Modulator

We have developed optically-addressed and electrically-addressed liquid crystal spatial phase-only light modulators having no pixelized structures. We obtained a large depth of phase-only modulation and high diffraction efficiency based on the electro-optical characteristics of a parallel-aligned nematic liquid crystal. These spatial light modulators (SLM) are of the reflection type, so there would be a loss of power in the readout light from the half mirror, which was set up so as to separate the incident and reflected lights. To optimize the characteristics of a reflection type spatial phase-only light modulator, we have proposed an oblique incident optical readout setup. We have examined the effect of conditions such as the polarization direction and the incidence angle of the readout light, and the orientation of liquid crystal molecules in the SLM. High diffraction efficiency close to the theoretical maximum value was obtained by adjusting the above conditions. The simulation analysis can well explain the experimental results of phase modulation.     

卟啉-二芳基乙烯分子的合成及其无损读取性能

二噻吩乙烯是一类性能优良的有机光致变色化合物,在信息储存领域具有广阔的应用前景,本文以2-甲基噻吩、苯甲醛和吡咯为原料,经过多步反应合成了1-(2-甲基-3-噻吩基)-2-{2-甲基-5-{4-[4-(10,15,20-三苯基-5-卟啉基)苯基]氨基羰基苯基}-3-噻吩基}环戊烯(DTE-TPP),其结构经核磁共振波谱仪(NMR)、质谱(MS)和傅里叶变换红外光谱仪(FTIR)表征确认,通过紫外-可见光谱研究了化合物的光致变色性能、抗疲劳性,并辅以荧光光谱探究了化合物的无损读取功能。结果表明,该化合物在254和660 nm的光照射下,发生可逆的光致变色反应,重复光照8次后其紫外-可见光谱与初始谱图相比无明显差异,显示出良好的抗疲劳性;当激发光为520 nm时,开、闭环异构体有较高的荧光对比度,有望实现数据的无损读取。