相匹配契伦可夫辐射式倍频

用波导产生倍频波时,如果倍频波进入辐射模区,仍然有相匹配问题。契伦可夫辐射式倍频不是自动地实现相匹配的。相匹配要求导波基波模式场,倍频传输场(自由波),倍频触发场,以及经多次反射透射后的辐射场的迭加形成的总辐射场处于同步的相匹配状态。根据这个相匹配的分析,提出波导契伦可夫相匹配的特有的方法,那就是对波导的模色散进行设计,并指出非对称波导的特有优点,是改变一个边界上的反射相变,即选择不同色散的线性材料作包层,由此可得到相匹配的高效契伦可夫倍频辐射。     

加肋圆柱壳在轴压作用下的屈曲和后屈曲

本文讨论完善和非完善的,纵向加肋和正交加肋圆柱壳在轴压作用下的屈曲和后屈曲性态.依据文[1]提供的圆柱薄壳屈曲的边界层理论及其分析方法,给出了加肋圆柱壳在轴压作用下的屈曲和后屈曲理论分析.本文同时讨论肋骨与壳板材料不同时对加肋圆柱壳屈曲和后屈曲性态的影响.     

Single-mode rib polymer waveguides and electro-optic polymer waveguide switches

Mode-matching and effective index methods are used to analyze single-mode operation of optical rib polymer waveguides. Their single-mode waveguiding conditions are determined. Single-mode rib waveguides fabricated from guest–host polyetherketone are presented. The estimated propagation loss of straight rib-waveguides is 0.7 dB/cm at 1.55 μm. Furthermore, by using the mode field-transfer matrix method, 2×2 and 4×4 polymer Mach–Zehnder interference switch operating at 1.55 μm wavelength has been designed based on optical multi-mode interference.     

串联双环光微谐振器的滤波特性

详细研究了串联双环光微谐振器的光带通滤波特性，给出了其通带带宽的公式，分析了出／入环光耦合系数和环间光耦合系数对通带特性的影响，计算并特别强调了滤波通带的结构特点，也分析了微环中存在的光损耗对串联双环光微谐振器的滤波特性的影响。     

Stability and Nonlinear Deformation of Cylindrical Grids

The general stability of single-layer cylindrical grids is studied in linear and nonlinear formulations. Dependence of the general buckling load on the geometry and stiffness parameters of a grid is established in an analytical form. Such grids are numerically analyzed for stability. It is established that the general buckling load is much less than the local buckling load. Typical general buckling modes are found. It is shown that such grids are weakly sensitive to imperfections     

替代柱面透镜的二元光学元件设计

在二极管泵浦固体激光器耦合光学系统中，柱面透镜起着非常重要的作用。随着系统轻量化、小型化的要求需要用重量轻、尺寸小的光学器件来替代。本文介绍一种用于替代柱面透镜的二元光学元件的设计和制作方法。     

共振原子蒸气中激光脉冲的时空特性

在柱对称条件下，利用耦合的布洛赫－麦克斯韦方程，研究了激光脉冲在原子蒸气介质中的共振传播。考察了脉中在时空中的演化。数值计算结果表明激光脉冲在传播中，由于自感应透明与光波的衍射效应，表现出复杂的相干现象。     

Picosecond control of coherent magnetisation dynamics in permalloy thin films by picosecond magnetic field pulse shaping

We have measured the response of a 20×10 μm, 8 nm thin NiFe (80:20) permalloy film due to excitation by short in-plane magnetic field pulses. We will show that using a two-pulse-technique a complete control of the precessional motion of the magnetisation can be achieved on picosecond timescales. Furthermore, we will present numerical calculations which show that a complete suppression of magnetisation ringing after switching can only be realised by a cascade of short field pulses.     

Dielectric effect on the rf characteristics of a helical groove travelling wave tube

A new type of partial-dielectric-loaded helical groove slow-wave structure (SWS) for millimetre wave travelling wave tube (TWT） is presented in this paper.The radio-frequency characteristics including the dispersion properties,the longitudinal electric field distribution and the beam-wave coupling impedance of this structure are analysed.The results show that the dispersion of the helical groove circuit is weakened,the phase velocity is reduced and the position of the maximum Ez is moved from the mouth to the inside of the groove after partially filling the dielectric materials in the helical groove SWS.Therefore,the dielectric-loaded helical groove SWS is suitable for a multi-beam TWT with broad band and high gain.     

Analysis method of the effect of fabrication errors on a planar waveguide demultiplexer

The impact of fabrication errors on a planar waveguide demultiplexer is analyzed based on an analytical method. The explicit expression of the transfer function taking into account phase and amplitude errors is presented in order to analyze the loss and crosstalk of the demultiplexer caused by fabrication errors. A basic requirement for the demultiplexer with a certain crosstalk criterion can be easily obtained. Using an etched diffraction grating demultiplexer as an example, it is shown that the analytical results have a good agreement with results from a numerical method.